不同舵翼操纵面形式的水动力及艇后流场特性数值模拟研究

为研究共翼型舵和非共翼型舵两种操纵面形式的艇后流场特性及螺旋桨推进特性，基于SST(Menter)湍流模型建立了SUBOFF标准潜艇模型尾流场数值预报模型。经试验结果验证，所建立数值模型进行潜艇尾流场及螺旋桨推进性能预报具有较高精度。将SUBOFF潜艇模型的水平舵改进为共翼型舵及非共翼型舵，对艇后流场及水动力性能进行了预报。数值结果表明：在舵角小于10°时，共翼型舵使潜艇的俯仰力矩和垂向力相对非共翼型舵提升20%以上；在舵角超过10°时，共翼型舵的水动力优势随着舵角增大而减小。尾部流场预报显示：共翼型舵在小舵角时可以有效的消除舵翼结合处的涡流，同时共翼型舵可以有效的降低桨盘面伴流的不均匀性，对尾流品质的改善效果优于非共翼型舵。螺旋桨计算结果显示：共翼型舵螺旋桨推进系数在大部分舵角下都小于非共翼型舵，在舵角为20°时，共翼型舵相对非共翼型舵推力系数下降3.5%，扭矩系数下降2.4%；同时共翼型舵的桨盘面流场均匀度要优于非共翼型舵，舵角为5°时，共翼型舵桨盘面处流场不均匀度相对于非共翼型舵要降低7.1%，舵角为25°时则降低25.1%。     

仿壁虎刚毛阵列对卫星表面吸附能力模型与计算

壁虎脚的粘着机理对航天机器人脚掌的研制和开发具有重要启发意义.通过单根刚毛与光滑表面黏着力模型与计算、卫星粗糙表面分布模型与接触概率与计算、刚毛阵列与卫星粗糙表面黏着力模型与计算等，分析仿壁虎刚毛阵列对卫星表面的吸附能力，发现在一定条件下仿壁虎刚毛阵能够在太空失重环境中黏着在卫星表面，对航天舱内爬行机器人、管道机器人的研制和开发具有重要的启示意义.     

Time delay compensation in lateral-directional flight control systems at high angles of attack

The previous studies of time delay compensation in flight control systems are all based on the conventional aerodynamic derivative model and conducted in longitudinal motions at low angles of attack. In this investigation, the effects of time delay on the lateral-directional stability augmentation system in high-α regime are discussed based on the $\dot{\beta }$ model, which is proposed in our previous work and proved as a more accurate aerodynamic model to reveal the lateral-directional unsteady aerodynamic characteristics at high angles of attack. Both the $\dot{\beta }$ model and the quasi-steady model are used for simulating the effects of time delay on the flying qualities in high-α maneuvers. The comparison between the simulation results shows that the flying qualities are much more sensitive to the mismatch of feedback gains than the state errors caused by time delay. Then a typical adaptive controller based on the conventional dynamic derivative model and a gain-prediction compensator based on $\dot{\beta }$ model are designed to address the time delay in different maneuvers. The simulation results show that the gain-prediction compensator is much simpler and more efficient at high angles of attack. Finally, the gain-prediction compensator is combined with a linearized $\dot{\beta }$ model reference adaptive controller to compensate the adverse effects of very large time delay, which exhibits excellent performance when addressing the extreme conditions at high angles of attack.     

金属增材制造数据处理与工艺规划研究综述

金属增材制造数据处理与工艺规划是金属增材制造软件系统的核心,涵盖了金属支撑结构设计、模型切片以及路径规划等内容,决定着最终金属零部件的产品性能。从金属增材制造模型前处理出发,较为全面地概述了与之相关的多类型支撑设计和新型支撑优化等数据处理内容,针对金属增材制造数据处理中模型切片这一关键环节,分别从平面切片、自适应切片和曲面切片等方面进行了研究进展综述,同时对金属增材制造工艺中的路径规划研究进展进行了概述,最后对其发展趋势做了初步展望。     

几何尺寸约束的超燃冲压发动机推力喷管设计

针对机体/推进系统一体化要求，提出了一种几何尺寸约束的超燃冲压发动机推力喷管设计方法，以实现在满足几何约束条件下优化喷管的气动性能。采用数值模拟对提出的设计方法展开了研究，在此过程中，首先校核了数值方法有效性并确定了网格分辨率。进一步就喷管设计过程中2个关键设计因子——比例因子和非对称因子开展了影响研究。最后为验证本文提出的设计方法的有效性和优越性，将其与典型截短设计方法进行对比分析。结果表明，相比截短方法，本文提出的设计方法不仅能够获得满足几何约束的喷管，同时可使喷管推力系数、升力和俯仰力矩分别提升33.36%、265.75%和37.21%。此外，本文提出的设计方法还可以通过调整设计因子来获得不同气动性能的喷管，进而满足应用过程中的实际需求。     

Dynamic parametric modeling-based model updating strategy of aeroengine casings

For accurate Finite Element (FE) modeling for the structural dynamics of aeroengine casings, Parametric Modeling-based Model Updating Strategy (PM-MUS) is proposed based on efficient FE parametric modeling and model updating techniques regarding uncorrelated/correlated mode shapes. Casings structure is parametrically modeled by simplifying initial structural FE model and equivalently simulating mechanical characteristics. Uncorrelated modes between FE model and experiment are reasonably handled by adopting an objective function to recognize correct correlated modes pairs. The parametrized FE model is updated to effectively describe structural dynamic characteristics in respect of testing data. The model updating technology is firstly validated by the detailed FE model updating of one fixed–fixed beam structure in light of correlated/uncorrelated mode shapes and measured mode data. The PM-MUS is applied to the FE parametrized model updating of an aeroengine stator system (casings) which is constructed by the proposed parametric modeling approach. As revealed in this study, (A) the updated models by the proposed updating strategy and dynamic test data is accurate, and (B) the uncorrelated modes like close modes can be effectively handled and precisely identify the FE model mode associated the corresponding experimental mode, and (C) parametric modeling can enhance the dynamic modeling updating of complex structure in the accuracy of mode matching. The efforts of this study provide an efficient dynamic model updating strategy (PM-MUS) for aeroengine casings by parametric modeling and experimental test data regarding uncorrelated modes.     

Evaluation of SARAL/AltiKa performance using GNSS/IMU equipped buoy in Sajafi,Imam Hassan and Kangan Ports

Performance of SARAL/AltiKa mission has been evaluated within 2016 altimeter calibration/validation framework in Persian Gulf through three campaigns conducted in the offshore waters of Sajafi, Imam Hassan and Kangan Ports, while the altimeter overflew the passes 470, 111 and 25 on 13 Feb, 7 March and 17 June 2016, respectively. As the preparation, a lightweight buoy was equipped with a GNSS receiver/choke-ring antenna and a MEMS-based IMU to measure independent datasets in the field operations. To obtain accurate sea surface height (SSH) time series, the offset of the onboard antenna from the equilibrium sea level was predetermined through surveying operations as the buoy was deploying in the onshore waters of Kangan Port. Accordingly, the double-difference carrier phase observations have been processed via the Bernese GPS Software v. 5.0 so as to provide the GNSS-derived time series at the comparison points of the calibration campaigns, once the disturbing effects due to the platform tilt and heave have been eliminated. Owing to comparing of the SSH time series and the associating altimetry 1?Hz GDR-T datasets, the calibration/validation of the SARAL/AltiKa has been performed in the both cases of radiometer and ECMWF wet troposphere corrections so as to identify potential land contamination. An agreement of the present findings in comparison with those attained in other international calibrations sites confirms the promising feasibility of Persian Gulf as a new dedicated site for calibration/validation of ongoing and future altimetry missions.     

Kalman弹道滤波器的快速收敛性研究

在弹道修正过程中，需根据一段实测弹道参数，准确地估算常规弹箭的飞行弹道。工程中，常应用Kalman滤波方法，结合质点弹道模型建立六状态滤波弹道模型。速度初值估计的准确性，是对滤波过程造成影响的主要因素。为改善这一状况，采用多项式拟合用以对速度状态进行估计并以此作为滤波初始值。在此种估计下滤波，速度滤波过程可快速收敛，位置滤波过程收敛速度大幅度提高，可使最优弹道诸元参数获取时间缩短30%。     

半球谐振陀螺发展综述

首先阐述了半球谐振陀螺工作原理及技术优势，后着重对其在美国、俄罗斯、法国的发展历程、应用场景、技术发展、精度指标及进行了综述，同时概述了国内的发展历程、现阶段达到水平。其后，针对海上领域武器系统的特点及需求，在借鉴国外已有应用的基础上，论述半球谐振陀螺在海上应用的可能性及优势。最后对半球谐振陀螺的未来发展进行了展望。     

航天器视场遮挡分析方法研究

敏感器视场遮挡分析是航天器构型布局设计的重要组成部分，针对大型在轨变构型航天器敏感器视场遮挡分析工作量大、出错率高、遮挡率无法量化等特点，本文提出一种基于敏感器第一视角的视场遮挡快速分析方法。该方法通过设置第一视角图像蒙版及图像映射，模拟方锥形、圆锥形、球形等各类敏感器视场，通过逐个像素比对，计算视场遮挡率和遮挡方位。使用此方法建立了空间站敏感器视场遮挡分析系统，结果表明新方法能够显著提高视场遮挡分析效率和准确率，并且为机构类部件运动过程对敏感器视场遮挡的分析提供了有效工具。