First estimations of the aerosol optical thickness using Langley Method at Southern Brazil (29.4°S, 53.8°W)

The first estimations of the aerosol optical thickness (AOT) using Langley Method at Southern Space Observatory (SSO) at Southern Brazil (29.4°S, 53.8°W) are presented. In addition to ozone and sulphur dioxide columns, AOT can be obtained using Brewer Spectrophotometer at specific wavelengths: 306.3, 310.1, 313.5, 316.8 and 320.1 nm. The AOT was obtained for the period from November/2002 to May/2003. Very low AOT averages were obtained, whose values were about 0.21 ± 0.03 at 306.3 nm, 0.21 ± 0.02 at 310.1 nm, 0.19 ± 0.02 at 313.5 nm, 0.20 ± 0.02 at 316.8 nm and 0.20 ± 0.02 at 320.0 nm for all period analysed. Different behaviour of AOT were obtained at two daily specific periods of aerosol accumulation, one in the afternoons from November/2002 to February/2003, caused mainly by a mild biomass burning season’s in the region and other in the mornings from March to May/2003, due the high relative humidity presented in the region studied.     

射线检测厚度宽容度的分析与测定

厚度宽容度是变截面工件射线检测的重要参数。本文分析了典型工件的厚度差,以及不同灵敏度级别的厚度宽容度。应用胶片特性曲线、曝光曲线,从实验角度测量了厚度宽容度,并对结果作了分析和讨论。     

蓄冰盘管冰层厚度测量及管外蓄冰性能实验

提出了一种新型简便的冰层厚度测量方法,该方法用测量冰层内温度分布的方法间接测量冰层动态厚度及冰层的相界面生长规律。对蓄冰盘管外结冰过程的实验研究表明,测量方法可靠,具有较高的测量精度;实验发现,蓄冰盘管外上部冰层生长较快,而下部冰层生长较慢,而在实验参数范围内管内乙二醇水溶液流量对冰层生长速度影响不大。     

威布尔型产品的可靠性评估方法研究

在简要介绍极大拟然和小概率原理的基础上，针对威布尔型产品特征寿命的求取方法在各种文献中没有介绍、经典的双威布尔型串并联系统的可靠性评估方法既繁琐又不精确等情况，详细论述了如何运用威布尔型单机产品的可靠性试验样本求取其特征寿命，如何运用等效折合的方法求取威布尔型串并联系统的可靠性置信下限，最后对某威布尔型发动机系统的可靠性进行了评估,取得了较理想的结果。     

最少燃料消耗的固定推力共面轨道变轨研究

本文研究了推力固定条件下，从圆轨道进入共面圆轨道一次入轨最节省燃料的推力方向控制策略。这类问题都可归结为两点边值问题，对自由初值的选取作了讨论，并采用打靶法迭代求解。计算了从停泊轨道到同步转移道以及两个过地圆轨道之间的最优转移，获得满意的结果。     

基于及时修正策略的成败型产品可靠性增长分析

针对及时修正试验策略，根据Fries可靠性增长模型和Duane学习曲线特性，基于不同的失败类型对模型进行了扩展。用进化算法对似然函数求极值，获得了参数极大似然估计，以及最终研制阶段可靠性点估计。对某固体火箭发动机可靠性增长实例的分析结果表明，与经典评估方法相比，本文模型更具优越性。     

用计算机求最小外接圆和最大内切圆的快速,精确方法

文中分别介绍了用计算机求最小外接圆和最大内切圆的新算法。该算法中每一步都能确定圆心的最佳移动方向,沿该方向的圆心移动量可由公式确定,从而只需少数几步迭代就可求得实际轮廓的最小外接圆和最大内切圆的精确位置。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

变厚度锥形壳的固有频率

 变厚度锥形壳体的固有频率使用有限元计算已无困难,但有限元法编制程序复杂、费时多。本文用半解析法,由锥形壳的基本方程导出等价的8个一阶微分方程,用数值积分方法得到变厚度锥形壳体的固有频率。方法简单,编程容易,计算精度已满足工程计算要求。     

零件纵向厚度的计算方法

在用车床加工空心旋转体零件时，通过测量我们可以得出外轮廓曲线，但根据零件的设计技术要求，不同点处的法向厚度不同，因此在用车床加工时需要计算出各点的纵向厚度。本文给出了根据法向厚度及外曲线计算纵向厚度的方法．该方法简单、可靠，易于计算，而且由此方法计算的结果应用到实际加工时，效果非常好，该方法实用性强，易于推广使用。