蜂窝状薄壁管拉伸时的内陷分析

蜂窝材料因具备广阔的结构设计空间,已广泛应用于航空航天等工业领域。探索蜂窝元胞的组织结构、组分性质与材料整体性能之间的关系有助于新型功能性材料的设计开发。本文从非平面Vertex模型的势能形式出发,结合蜂窝薄壁圆管拉伸时的轴对称特征,通过变分法得到了圆管拉伸时母线满足的控制方程,揭示了边界效应是蜂窝状薄壁圆管受拉时产生内陷的原因,并结合母线控制方程的若干特解,考察了非平面Vertex模型势能形式中包含的材料性质参数与圆管拉伸后内陷程度及范围的关系。研究还指出,蜂窝材料的材料性质包含在非平面Vertex模型的势能形式中,为蜂窝状材料整体性能的研究提供了一种新的思路。     

详细化学反应机理对预混丙烷钝体熄火模拟影响

航空发动机熄火预测是重要关键问题之一，湍流和化学反应的非线性相互作用使预测非常困难。本文采用大涡模拟（LES）对湍流进行高精度模拟，采用概率密度函数输运方程湍流燃烧模型（TPDF）耦合JL4、Z66和H73三种化学反应机理，对预混丙烷钝体熄火现象和规律进行研究。JL4的反应机理最简单，反应释热快，局部放热高，火焰宽度大，火焰两侧温度梯度大，燃烧更加趋于稳定，无法模拟出熄火状态。H73机理绝热火焰温度低，火焰温度低，回流区中部OH含量高；在近熄火状态，大量CO被氧化，释放热量过高导致无法模拟出熄火现象。Z66机理可以模拟出火焰正常状态，在低当量比下也可以模拟出熄火状态。本文算例中，局部Da数大于1的区域超过35%则会发生熄火。     

Study of ionospheric D region changes during solar flares using MF radar measurements

During solar flares, the X-ray radiation suddenly increases, resulting in an increase in the electron density of the atmospheric D region and a strong absorption of short-wave radio waves. Based on Langfang medium frequency (MF) radar, this paper analyzed the variation characteristics of D region in the lower ionosphere from 62 km to 82 km. The analysis focused on multiple C-level and M-level solar flare events before and after the large-scale flare event at 11:53 (UT) on September 6, 2017. The results show that it is difficult to detect the electron density over 70 km in Langfang during solar flares, but the electron density value can be obtained as low as 62 km, and the stronger the flare intensity, the lower the detectable electron density height. Besides, the equal electron density height, the received power of X and O waves will also be significantly reduced during the flares, and the reduction of equal electron density height has a weak linear relationship with flare intensity.     

Thermosphere densities derived from Swarm GPS observations

After the detection of many anomalies in the Swarm accelerometer data, an alternative method has been developed to determine thermospheric densities for the three-satellite mission. Using a precise orbit determination approach, non-gravitational and aerodynamic-only accelerations are estimated from the high-quality Swarm GPS data. The GPS-derived non-gravitational accelerations serve as a baseline for the correction of the Swarm-C along-track accelerometer data. The aerodynamic accelerations are converted directly into thermospheric densities for all Swarm satellites, albeit at a much lower temporal resolution than the accelerometers would have been able to deliver. The resulting density and acceleration data sets are part of the European Space Agency Level 2 Swarm products.To improve the Swarm densities, two modifications have recently been added to our original processing scheme. They consist of a more refined handling of radiation pressure accelerations and the use of a high-fidelity satellite geometry and improved aerodynamic model. These modifications lead to a better agreement between estimated Swarm densities and NRLMSISE-00 model densities. The GPS-derived Swarm densities show variations due to solar and geomagnetic activity, as well as seasonal, latitudinal and diurnal variations. For low solar activity, however, the aerodynamic signal experienced by the Swarm satellites is very small, and therefore it is more difficult to accurately resolve latitudinal density variability using GPS data, especially for the higher-flying Swarm-B satellite. Therefore, mean orbit densities are also included in the Swarm density product.     

不同强度磁暴期间热层大气密度响应特征分析

利用CHAMP卫星数据，对2002-2008年12个不同强度磁暴事件期间的热层大气密度变化特征进行分析，并研究对应磁暴期间大气模式NRLMSISE-00分布特征.结果表明，大磁暴期间日侧大气密度峰值从高纬到低纬的时间延迟为2h，中小磁暴期间的延迟时间为3～4h；春秋季暴时大气密度分布基本呈南北对称分布，而夏冬季大气密度的分布是夏半球大于冬半球，春秋季暴时大气密度大于夏冬季；NRLMSISE-00大气模式得到的热层大气密度很好的体现了半球分布以及季节分布的特征，但模式模拟结果偏小；Dst指数峰值比ap指数峰值更能反应大气密度的变化情况.      

吸气式电推进系统可行条件分析

吸气式电推进系统作为有可能实现长寿命超低轨飞行的技术而被关注。根据不同轨道环境条件，采用管状结构进气道、以及机械增压的吸气方式，讨论了吸气式电推进系统所需的可行条件。分析表明，在轨高度180~240km，航天器所需总功耗与迎风面之比需要大于2kW/m2，电推力器比冲需大于4×104m/s，方可满足推阻平衡需求。分析得出，实现吸气式系统在地球轨道的运用，关键技术在于增加气体收集效率并且降低收集功耗，同时电推力器的效率还需进一步提升。     

ZL205A合金舱体低压工艺设计及数值仿真应用

针对某ZL205A合金舱体铸件壁薄难充型、壁厚差异大、易产生裂纹等特点,设计了低压底注式浇注工艺。采用立筒缝隙式浇注系统分配充型过程中合金的流量,局部厚大部位放置成形冷铁加快该部位的冷却速度,以控制铸造缺陷的产生。利用ProCast数值仿真软件对工艺进行仿真计算,成功预测了缺陷的产生位置,对工艺方案进行优化,包括倒角过渡、改变型砂使用等,并在优化方案的基础上浇注了舱体铸件,铸件质量良好,没有缩松、缩孔、裂纹等缺陷,符合相关技术要求。     

Modeling and analysis of mover gaps in tubular moving-magnet linear oscillating motors

A tubular moving-magnet linear oscillating motor (TMMLOM) has merits of high efficiency and excellent dynamic capability. To enhance the thrust performance, quasi-Halbach permanent magnet (PM) arrays are arranged on its mover in the application of a linear electro-hydrostatic actuator in more electric aircraft. The arrays are assembled by several individual segments, which lead to gaps between them inevitably. To investigate the effects of the gaps on the radial magnetic flux density and the machine thrust in this paper, an analytical model is built considering both axial and radial gaps. The model is validated by finite element simulations and experimental results. Distributions of the magnetic flux are described in condition of different sizes of radial and axial gaps. Besides, the output force is also discussed in normal and end windings. Finally, the model has demonstrated that both kinds of gaps have a negative effect on the thrust, and the linear motor is more sensitive to radial ones.     

A comparative study of ionospheric IRIEup and ISP assimilative models during some intense and severe geomagnetic storms

Three-dimensional (3-D) electron density matrices, computed in the Mediterranean area by the IRI climatological model and IRIEup and ISP nowcasting models, during some intense and severe geomagnetic-ionospheric storms, were ingested by the ray tracing software tool IONORT, to synthesize quasi-vertical ionograms. IRIEup model was run in different operational modes: (1) assimilating validated autoscaled electron density profiles only from a limited area which, in our case, is the Mediterranean sector (IRIEup_re(V) mode); (2) assimilating electron density profiles from a larger region including several stations spread across Europe: (a) without taking care of validating the autoscaled data in the assimilation process (IRIEup(NV)); (b) validating carefully the autoscaled electron density profiles before their assimilation (IRIEup(V)).The comparative analysis was carried out comparing IRI, IRIEup_re(V), ISP, IRIEup(NV), and IRIEup(V) foF2 synthesized values, with corresponding foF2 measurements autoscaled by ARTIST, and then validated, at the truth sites of Roquetes (40.80°N, 0.50°E, Spain), San Vito (40.60°N, 17.80°E, Italy), Athens (38.00°N, 23.50°E, Greece), and Nicosia, (35.03°N, 33.16°E, Cyprus). The outcomes demonstrate that: (1) IRIEup_re(V), performs better than ISP in the western Mediterranean (around Roquetes); (2) ISP performs slightly better than IRIEup_re(V) in the central part of Mediterranean (around Athens and San Vito); (3) ISP performance is better than the IRIEup_re(V) one in the eastern Mediterranean (around Nicosia); (4) IRIEup(NV) performance is worse than the IRIEup(V) one; (5) in the central Mediterranean area, IRIEup(V) performance is better than the IRIEup_re(V) one, and it is practically the same for the western and eastern sectors.Concerning the overall performance, nowcasting models proved to be considerably more reliable than the climatological IRI model to represent the ionosphere behaviour during geomagnetic-ionospheric storm conditions; ISP and IRIEup(V) provided the best performance, but neither of them has clearly prevailed over the other one.     

战术导弹中小型固体发动机技术的发展

通过对战术导弹中小型固体发动机具体发展需求的分析,明确了高能化、轻质化、可控化和低易损4个主要的中小型固体发动机发展方向。可以从提高推进剂黏合剂密度和燃烧室工作压强来实现高能化;采用轻质高性能金属壳体、纤维缠绕复合材料壳体以及提高绝热层性能以实现轻质化;可控化需要在高功率密度的驱动装置、高精度的控制算法等方面获得突破和支撑;低易损则可以从钝感推进剂、主动扩稳、防护材料等途径开展工作。通过对这4个技术方向上国内外研究现状和发展趋势进行梳理,明确提出未来研究需要突破推进剂和热防护原材料、新型装药工艺、可调燃气阀门、压力闭环控制和有效扩稳等关键技术,加速工程化进程,为我国战术导弹的跨越式发展提供支撑。