Grinding force and surface quality in creep feed profile grinding of turbine blade root of nickel-based superalloy with microcrystalline alumina abrasive wheels

Creep feed profile grinding of the fir-tree blade root forms of single crystal nickel-based superalloy was conducted using microcrystalline alumina abrasive wheels in the present study. The grinding force and the surface quality in terms of surface topography, subsurface microstructure, microhardness and residual stress obtained under different grinding conditions were evaluated comparatively. Experimental results indicated that the grinding force was influenced significantly by the competing predominance between the grinding parameters and the cross-sectional root workpiece profile. In addition, the root workpiece surface, including the root peak and valley regions, was produced with the large difference in surface quality due to the nonuniform grinding loads along the root workpiece profile in normal section. Detailed results showed that the surface roughness, subsurface plastic deformation and work hardening level of the root valley region were higher by up to 25%, 20% and 7% in average than those obtained in the root peak region, respectively, in the current investigation. Finally, the superior parameters were recommended in the creep feed profile grinding of the fir-tree blade root forms. This study is helpful to provide industry guidance to optimize the machining process for the high-valued parts with complicated profiles.     

机翼用铝合金材料原始疲劳质量对比

当前航空工业的发展对于超高强铝合金材料的需求十分迫切，实现该材料的国产化并达到良好的质量效果至关重要。为了对中国航空工业中常用的7XXX新型铝合金材料的原始疲劳质量（IFQ）进行评估，选取裂纹萌生时间（TTCI）和当量初始缺陷尺寸（EIFS）作为对比参量，分别对中国飞机机翼用7XXX紧固孔试件和俄系BXXX紧固孔试件开展了低、中、高3种应力水平下的疲劳试验，通过对比分析得到了两种试件在不同应力水平下的TTCI趋于一致，最大仅相差3.71%；得到了每个试件的EIFS，应用疲劳统计学方法验证了两种试件材料各自的EIFS值无显著性差异；提出了一种不同超越概率下的结构细节当量初始缺陷模型，直接有效地对飞机结构细节的质量风险进行了评估；建立并对比分析了两种试件结构细节的通用EIFS分布，结果均小于中国军用手册规定的0.125 mm，且在超越概率为5%时，7XXX材料的通用EIFS值要小于BXXX材料的通用EIFS值。     

基于图像特征融合的粉末床缺陷检测方法

针对单一特征对粉末床缺陷表达不明确导致检测效果不佳的问题，提出了一种基于特征融合的增材制造过程粉末床缺陷视觉检测方法。该算法分别使用SIFT方法、灰度共生矩阵和Hu不变矩提取尺度空间特征、纹理特征和几何特征，借助词袋模型对每张图像构建3组视觉单词直方图，通过串行融合3组视觉单词直方图得到新的特征矩阵，采用特征选择对融合后特征矩阵进行降维，并传入随机森林分类器中进行训练。实验结果表明，不同特征对粉末床不同类型缺陷检测具有不同的贡献，优化特征融合参数后，算法平均准确率达到97.46%，缺陷检测效果明显提升。     

水下巡检蛇形机器人移动单元结构设计及计算

随着经济蓬勃发展,水生农作物市场的需求量不断增长,水域水质检测行业显得日益重要,但人工水质水域检测效率低下,为此设计一套可以搭载检测传感器的水质检测蛇形机器人,以提高检测效率、降低检测成本、减轻人工劳动力度。为适应水下环境,该机器人具备小巧、灵活、机动性能好、转弯灵活、对复杂水域适应能力强、可检测不同深度水质的特点,在此针对机器人的移动单元结构设计及强度校核等问题进行分析,可为以后解决此类问题提供一种验证手段。     

Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.     

阶梯钻钻削碳纤维复合材料的钻削力及孔质量

根据碳纤维复合材料制孔过程中产生的缺陷,自主磨制专用钻头——阶梯钻对碳纤维复合材料进行钻削实验,研究了在不同加工参数下阶梯钻钻削碳纤维复合材料的钻削力、孔出口质量、孔壁表面粗糙度,并与普通麻花钻头进行对比。结果表明:阶梯钻产生的钻削轴向力是麻花钻的一半,孔壁表面粗糙度值更小,孔出口没有明显的缺陷,阶梯钻适合钻削碳纤维复合材料。     

利用微波探测仪(ATMS)对在轨微波辐射计观测精度的模拟分析

微波辐射计的观测精度及其对数值模式同化应用的影响评估是微波辐射计观测指标设计的重要参考。基于微波探测仪(ATMS)资料,利用三维变分同化系统模拟分析在轨微波辐射计的观测精度指标。针对ATMS观测误差特征,在其观测基础上增加均值为零、标准偏差分别为0.5,1.0,1.5,2.0K的正态随机扰动,进而获得不同精度的观测模拟值序列,然后利用Harris和Kelley的辐射资料偏差订正经验方法订正不同精度的观测资料。偏差订正后,利用三维变分同化模式(WRFDA)直接同化ATMS资料。通过2016年6月6h预报场的同化试验,评估了不同观测精度的模拟资料对数值模式的同化影响。     

刀具材料对CFRP齿槽加工质量的影响

采用硬质合金(YG6X)和PCD刀具分别对CFRP进行齿槽加工试验,探究刀具材料对齿槽加工质量的影响。结果表明:随着每齿进给量f_z的增大,撕裂因子F_(sl)呈明显的增大趋势;采用PCD铣刀铣制齿槽,其加工质量较为稳定,加工质量较理想。     

Effect of curing condition on bonding quality of scarf-repaired composite laminates

Both single-face vacuum bag curing (SVC) and double-face vacuum bag curing (DVC) can be used in scarf repair of composite structures. But different curing conditions caused by the sealing state may affect the bonding quality of scarf-repaired structures. In this paper, the effect of curing condition on bonding quality of scarf-repaired laminates was experimentally investigated in terms of surface profiles, moisture absorption curves and section profiles. In order to further explore the moisture absorption mechanism, finite element model of the repaired laminates using DVC was established with moisture diffusion of both the adhesive and composite laminates considered. This model was verified by experimental results. Based on the model of DVC case, the model of SVC case was built by changing moisture absorption parameters of the adhesive. Results show that SVC reduces the bonding quality, mainly reflecting in more adhesive inner voids and patch-to-parent dislocation. And SVC increases moisture absorption rate and moisture equilibrium content of the adhesive, and its effect on the former is far greater than that on the latter.     

哨兵2卫星综合水质指标的河流水质遥感监测方法

上海市河流水污染监测是当前研究的热点问题。针对上海市河流水质监测的需求,提出了一种基于因子分析的河流综合水质遥感反演的方法。以欧洲航空局发射的哨兵-2A(Sentinel-2A)卫星搭载的多光谱成像仪获取的遥感影像,以及准同步获取的河流断面实测水质参数数据为例,研究对象为上海市青浦区和松江区部分河道。选取高锰酸盐指数、氨氮等5项主要水质参数为监测指标,在因子分析的基础上建立水质遥感反演的模型,得到综合水质指标用于确定水质类别。实验结果表明:综合水质指标值越小,内陆河流水质状况越良好,水体更清洁。该方法能够应用于内陆河流水质遥感监测,为水环境管理部门提供参考信息。