首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   1404篇
  免费   448篇
  国内免费   281篇
航空   1333篇
航天技术   305篇
综合类   179篇
航天   316篇
  2023年   38篇
  2022年   54篇
  2021年   89篇
  2020年   88篇
  2019年   59篇
  2018年   64篇
  2017年   102篇
  2016年   94篇
  2015年   89篇
  2014年   114篇
  2013年   79篇
  2012年   121篇
  2011年   132篇
  2010年   100篇
  2009年   124篇
  2008年   84篇
  2007年   98篇
  2006年   100篇
  2005年   66篇
  2004年   41篇
  2003年   55篇
  2002年   39篇
  2001年   43篇
  2000年   30篇
  1999年   31篇
  1998年   32篇
  1997年   35篇
  1996年   34篇
  1995年   19篇
  1994年   27篇
  1993年   12篇
  1992年   11篇
  1991年   11篇
  1990年   7篇
  1989年   9篇
  1988年   2篇
排序方式: 共有2133条查询结果,搜索用时 15 毫秒
1.
为优化高温升主燃烧室燃烧性能,对三级旋流主燃烧室开展雾化特性试验研究。预燃级喷嘴采用离心喷嘴压力雾化和气动雾化相结合,主燃级采用预膜式气动雾化。试验采用相位多普勒粒子分析仪对主预燃级喷嘴和燃油分级后的雾化特性进行研究,对比分析了不同头部压降和燃油流量在不同轴向截面和径向位置的液滴粒径分布,并利用高速摄像对不同工况下的喷雾形态进行了记录。试验结果表明:主燃级油雾粒径为50~80μm,气液比达到3.5即可达到良好的雾化水平。随着轴向距离延长,喷雾粒径变大,喷雾浓度变得均匀。燃油分级比增加可降低整体粒径约10μm,且主要影响中心区域,对雾锥外侧粒径影响不大。  相似文献   
2.
某型惯性导航系统在飞机上时有故障发生,造成导航系统无法正常使用,其中较为突出的是惯导报53#环境温控故障。为降低该惯导在飞机上的故障率,通过研究环境温控回路的工作原理,解析其故障机理,并以几起典型53#故障的排除为例深入分析,提出有效的预防措施,以延伸修理深度,提高产品修理质量。  相似文献   
3.
In recent years, land surface temperature (LST) has become critical in environmental studies and earth science. Remote sensing technology enables spatiotemporal monitoring of this parameter on large scales. This parameter can be estimated by satellite images with at least one thermal band. Sentinel-3 SLSTR data provide LST products with a spatial resolution of 1 km. In this research, direct and indirect validation procedures were employed to evaluate the Sentinel-3 SLSTR LST products over the study area in different seasons from 2018 to 2019. The validation method was based on the absolute (direct) evaluation of this product with field data and comparison (indirect) evaluation with the MODIS LST product and the estimated LST using the non-linear split-window (NSW) algorithm. Also, two emissivity estimation methods, (1) NDVI thresholding method (NDVI-THM) and (2) classification-based emissivity method (CBEM), were used to estimate the LST using the NSW method according to the two thermal bands of Sentinel-3 images. Then, the accuracy of these methods in estimating LST was evaluated using field data and temporal changes of vegetation, which the NDVI-THM method generated better results. For indirect evaluation between the Sentinel-3 LST product, MODIS LST product, and LST estimated using NSW, four filters based on spatial and temporal separates between pairs of pixels and pixel quality were used to ensure the accuracy and consistency of the compared pairs of a pixel. In general, the accuracy results of the LST products of MODIS and Sentinel-3, and LST estimated using NSW showed a similar trend for LST changes during the seasons. With respect to the two absolute and comparative validations for the Sentinel-3 LST products, summer with the highest values of bias (?1.24 K), standard deviation (StDv = 2.66 K), and RMSE (2.43 K), and winter with the lowest ones (bias of 0.14 K, StDv of 1.13 K, and RMSE of 1.12 K) provided the worst and best results for the seasons in the period of 2018–2019, respectively. According to both absolute and comparative evaluation results, the Sentinel-3 SLSTR LST products provided reliable results for all seasons on a large temporal and spatial scale over our studied area.  相似文献   
4.
刘昌国  关亮  施伟  王子模 《推进技术》2021,42(7):1662-1670
为探究低温环境下单组元300N发动机的工作特性,揭示影响发动机低温性能的主要影响因素,以300N发动机为试验对象,开展了模拟飞行工况的发动机低温试验。给出了低温试验研究方法,分别从温度差异对发动机性能影响、催化剂活性差异对发动机低温启动特性影响和低温对电磁阀响应特性影响等方面获得研究结果。结果表明,低温是影响发动机低温性能的主要影响因素,-48℃条件催化剂无法完成推进剂的催化分解,发动机发生爆炸;-30℃条件下起活时间为80.5~87.5ms,发动机可正常启动,且启动温度与起活时间呈指数关系;催化剂批次差异也对发动机低温工作性能产生一定影响,不同批次催化剂低温起活时间的差异可达91ms;低温试验过程中,电磁阀的关闭受到低温推进剂粘性和背压的影响,产生了明显的迟滞现象,延迟时间约100ms,对发动机在轨的精准控制存在一定影响。  相似文献   
5.
以982℃固溶水冷状态的Inconel 718合金棒材为研究对象,分析该合金经重复固溶再时效处理后的组织性能,并与直接时效处理进行对比。结果表明:在941~1010℃范围内重复固溶,随着固溶温度的升高,晶粒无明显变化,但是δ相含量逐渐减少,主要强化相γ′′的析出量增多,使合金硬度、高温拉伸强度和高温持久寿命显著提高,高温拉伸塑性、高温持久塑性在982℃固溶时达到极大值。与直接进行时效处理相比,经982℃重复固溶再时效处理后的组织性能无明显变化,更低的重复固溶温度对性能不利,而更高的重复固溶温度则使性能提高。  相似文献   
6.
采用电化学阳极氧化技术在含NH4F的乙二醇电解液中对TiAl合金进行阳极氧化处理。研究阳极氧化对TiAl合金高温氧化行为和力学性能的影响。结果表明:由于“卤素效应”,阳极氧化处理的TiAl合金经高温氧化后表面形成致密、连续的Al2O3氧化膜,有效阻止了氧的内扩散,进而显著提高合金的抗高温氧化性能。经1000℃氧化100 h后,阳极氧化试样增重由未经阳极氧化处理试样的85.86 mg/cm2降至0.67 mg/cm2。另一方面,阳极氧化TiAl合金表面硬度和弹性模量随高温氧化时间延长呈先降低后升高的趋势。阳极氧化TiAl合金在高温服役后,合金的摩擦系数较未经阳极氧化处理试样上升,但表面耐磨性先降低后升高。这是由于TiAl合金经阳极氧化后,表面形成了一层富铝含氟氧化膜,由于氧化膜中F元素在高温氧化过程中与Ti、Al结合形成卤化物,卤化物蒸气选择性扩散在原始氧化膜处形成致密的Al2O3保护膜。阳极氧化对TiAl合金力学性能的影响主要是由于氧化膜中Al2O3的含量变化所致。  相似文献   
7.
波音737NG飞机APU故障影响航班运行,而APU滑油系统是其安全运行的重要保障,大多数APU的故障都能够从滑油系统的监控指标中找到故障征兆。本文基于737NG飞机APU滑油系统工作原理,提出了一项APU滑油系统的监控指标——温升速率,并利用该指标总结排故方法进行重点故障的监控,有效地提高了排故效率。  相似文献   
8.
高尧  曹君  邹春花  汪奇 《航空动力学报》2019,46(7):56-61, 88
以高精度无槽盘式永磁电机为研究对象,建立了电机三维电磁仿真模型。详细分析了该电机反电动势和转矩特性,避免由高次谐波引起的定、转子及永磁体涡流损耗,有效改善了电机的热性能,为进一步研究打下基础。建立了三维温度场仿真模型,分析了热源分布和传热过程,计算了电机在自然散热条件下温度的稳态分布。最后通过电机温升试验,验证了理论分析的正确性与合理性。  相似文献   
9.
实验研究了钛合金和高反射型陶瓷涂层材料抗连续型激光烧蚀的损伤及温度分布特性,并从热效应影响角度对比分析了二者在抗激光损伤效果方面的差异性。研究结果表明:相比于钛合金,高反射型陶瓷涂层材料能有效增强钛合金基底抗激光损伤的能力;在同等激光功率密度辐照下,陶瓷涂层材料能有效提升钛合金基底耐受激光辐照的时间长度。实验结果表明该陶瓷涂层材料的激光损伤阈值比钛合金高约5.8倍。实验发现陶瓷涂层温升速率高于钛合金,但由于陶瓷材料具有较高的反射特性,以及良好的热吸收和热传导特性,因此能使由激光辐照产生的热量在其表面较快地扩散,而降低向基底方向传导的程度,最终提升陶瓷涂层的抗激光损伤阈值。  相似文献   
10.
Due to the special geographical location and extreme climate environment, the polar regions (Antarctic and Arctic) have an important impact on global climate change. Atmospheric weighted mean temperature (Tm) is a crucial parameter in the retrieval of precipitable water vapor (PWV) from the zenith wet delay (ZWD) of ground-based Global Navigation Satellite System (GNSS) signal propagation. In this paper, the correlation between weighted mean temperature and surface temperature (Ts) is studied firstly. It is shown that the correlation coefficients between Tm and Ts are 0.93 in the Antarctic and 0.94 in the Arctic. The linear regression Tm model and quadratic function Tm model of the Antarctic and the Arctic are established respectively using the radiosonde profiles of 12 stations in the Antarctic and 58 stations in the Arctic from 2008 to 2015. The accuracies of the linear regression Tm model, the quadratic function Tm model and GPT2w Tm model which is a state-of-the-art global Tm model are verified using the radiosonde profiles from 2016 to 2018 in the Antarctic and Arctic. Root Mean Square (RMS) errors of the linear regression Tm model, the quadratic function Tm model and GPT2w Tm model in the Antarctic are 3.07 K, 2.87 K and 4.32 K respectively, and those in the Arctic are 3.53 K, 3.38 K and 4.82 K, which indicates that the quadratic function Tm model has a higher accuracy compared to linear regression Tm model, and the accuracies of the two regional Tm models are better than that of GPT2w Tm model in the polar regions. In order to better evaluate the accuracy of Tm in the PWV retrieval, the PWV values of radiosondes are used for comparisons as the reference value. The RMS errors of PWV derived from the two Tm models are similar for 1.28 mm in the Antarctic and 1 mm in the Arctic respectively. In addition, the spatial and temporal variation characteristics of Tm are analyzed in the polar regions by spectral analysis of Tm data using fast Fourier transform. The results show that the Tm has obvious seasonality and annual periodicity in the polar regions, and the maximum difference between warm season and cold season is about 63 K. After comparing and analyzing the influences of latitude, longitude and elevation on the Tm in the polar regions, it is found that latitude and elevation have a greater influence on the Tm than the longitude. As the latitude and elevation increase, the Tm decreases, and vice versa in the polar regions.  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号