首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   321篇
  免费   75篇
  国内免费   26篇
航空   308篇
航天技术   13篇
综合类   21篇
航天   80篇
  2023年   1篇
  2022年   9篇
  2021年   5篇
  2020年   8篇
  2019年   13篇
  2018年   7篇
  2017年   12篇
  2016年   8篇
  2015年   17篇
  2014年   15篇
  2013年   12篇
  2012年   28篇
  2011年   24篇
  2010年   14篇
  2009年   15篇
  2008年   24篇
  2007年   25篇
  2006年   16篇
  2005年   13篇
  2004年   19篇
  2003年   15篇
  2002年   8篇
  2001年   13篇
  2000年   3篇
  1999年   13篇
  1998年   9篇
  1997年   5篇
  1996年   21篇
  1995年   6篇
  1994年   8篇
  1993年   8篇
  1992年   1篇
  1991年   5篇
  1990年   6篇
  1989年   12篇
  1988年   1篇
  1987年   2篇
  1986年   1篇
排序方式: 共有422条查询结果,搜索用时 15 毫秒
1.
某型飞机地板网格翻转操作平台的一个输出接头通过接触受力的形式传递载荷,该连接形式无法使用常规线弹性静力学求解。由于该接触问题具有普遍性,本文结合相关的接触分析软件,对该结构进行了接触仿真分析,完成了结构的强度校核,提供了一个接触分析通用的解决方案。  相似文献   
2.
采用扩展有限元法(XFEM)和内聚力模型(CZM)相耦合的方法,分析胶接接头胶层内部裂纹扩展、界面脱粘分层现象。采用内聚力单元和内聚力接触描述胶层/板材界面,建立单/双搭接接头有限元模型。预测拉伸载荷下接头的强度性能并与已有试验数据对比分析,验证XFEM-CZM耦合法的可行性及内聚力单元和内聚力接触2种界面建模方法的有效性。模拟裂纹从胶层内部扩展至胶层/板材界面并引起界面脱粘分层的过程,分析其损伤失效机理。讨论初始裂纹长度和界面刚度、强度及应变能释放率对胶接接头强度性能的影响。结果表明:胶接接头强度随初始裂纹长度增加而降低,且在双搭接接头模型中表现更为明显;界面刚度、强度对胶接接头强度影响较大而应变能释放率的影响较小。   相似文献   
3.
Epocast 50-A1/946 epoxy was primarily developed for joining and repairing of composite aircraft structural components. The objective of the present work is to modify the Epocast epoxy resin by different nanofillers infusion. The used nanofillers include multi-walled carbon nanotubes(MWCNTs), SiC and Al2O3 nanoparticles. The nanofillers with different weight percentages are ultrasonically dispersed in the epoxy resin. The sonication time and amplitude for MWCNTs are reduced compared to Al2O3 and SiC nanoparticles to avoid the damage of MWCNTs during sonication processes. The fabricated neat epoxy and twelve nanocomposite panels were characterized via standard tension and in-plane shear tests. The experimental results show that the nanocomposites materials with 0.5wt% MWCNTs, 1.5wt% SiC and 1.5wt% Al2O3 nanoparticles have the highest improvement in the tensile properties compared to the other nanofiller loading percentages.The improvements in the shear properties of these nanocomposite materials were respectively equal to 5.5%, 4.9%, and 6.3% for shear strengths, and 10.3%, 16.0%, and 8.1% for shear moduli. The optimum nanofiller loading percentages will be used in the following papers concerning their effect on the bonded joints/repairs of carbon fiber reinforced composites.  相似文献   
4.
This paper presents a two-level geometric calibration method for the permanent magnet (PM) spherical actuator to improve its motion control accuracy. The proposed actuator is com- posed of a stator with circumferential coils and a rotor with multiple PM poles. Due to the assembly and fabrication errors, the real geometric parameters of the actuator will deviate from their design values. Hence, the identification of such errors is critical for the motion control tasks. A two-level geometric calibration approach is proposed to identify such errors. In the first level, the calibration model is formulated based on the differential form of the kinematic equation, which is to identify the geometric errors in the spherical joint. In the second level, the calibration model is formulated based on the differential form of torque formula, which is to calibrate the geometric parameters of the magnetization axes of PM poles and coils axes. To demonstrate the robustness and availability of the calibration algorithm, simulations are conducted. The results have shown that the proposed two-level calibration method can effectively compensate the geometric parameter errors and improve the positioning accuracy of the spherical actuator.  相似文献   
5.
设计了接头球半径为8cm的柔性接头及其增强件环向应力电测系统,测试了不同燃烧室压强和摆角条件下增强件的环向应力,并与现有经验公式、有限元分析结果进行了对比,基于有限元分析研究了接头球半径变化对增强件环向压缩应力的影响,提出了新的接头球半径在6~10cm范围内增强件环向压缩应力估算公式,另外研究了喷管喉径对柔性接头结构应力的影响,讨论了冷试容器压强和热试车发动机燃烧室压强换算公式的适用性。结果表明:增强件环向压缩应力试验测试结果和有限元计算结果吻合较好,现有增强件环向压缩应力经验公式估算结果值得商榷,柔性接头冷试结构应力与热试结构应力是不同的,冷试容器压强和热试车发动机燃烧室压强换算公式对于增强件环向压缩应力是适用的,但是对弹性件切应力不适用。   相似文献   
6.
在某客改货货舱门口框结构中,下主槛梁平面布局与地板平行,且低于地板横梁,需考虑在锁钩接头上设计连接件对地板横梁提供支撑或锁钩接头直接对地板横梁提供支撑。在框站位处,支撑地板横梁的锁钩接头受断框结构影响,导致其结构形式复杂。对几种波音空客成熟机型货舱锁钩接头在装配、受力特性、制造工艺和损伤容限性等方面进行分析比较,针对某客改货货舱口框特殊布局,对锁钩接头构型及其界面进行设计。旨在为客改货货舱口框锁钩接头构型提供一种设计思路。  相似文献   
7.
大气数据系统泄漏测试中静压连接困难,目前在用的两种静压接头都各有缺陷,因此自制了一种适用于各种机型的静压接头,其结构简单、高效易用、可靠性高,提高了工作效率。  相似文献   
8.
采用Zn-14.1Al-0.9Si和Zn-21.5Al-1.5Si两种钎料钎焊获得铜/铝接头,研究了Cu/Zn-Al-Si/Al接头Cu母材/钎缝界面结构、钎缝中心区显微组织、接头抗剪切性能和断口形貌.研究发现,Cu/Zn-14.1Al-0.9Si/Al接头和Cu/Zn-21.5Al-1.5Si/Al接头界面结构均为Cu/扩散层/Al4.2Cu3.2Zn0.7,其中Al4.2Cu3.2Zn0.7化合物层厚度分别为1~2 μm和3~4μm.2种铜/铝接头钎缝中心区均由α-Al固溶体,η-Zn固溶体,Zn-Al共晶和Si单质组成,未发现脆性CuAl2化合物.由于具有较薄的界面化合物层,在剪切力作用下,Cu/Zn-14.1Al-0.9Si/Al接头断裂一部分起源于Al4.2Cu3.2Zn0.7化合物层,另部分起源于界面扩散层,而Cu/Zn-21.5Al-1.5Si/Al接头断裂均起源于较厚的Al4.2Cu3.2Zn0.7化合物层.因此,Cu/Zn-14.1Al-0.9Si/Al接头的抗剪切强度高于Cu/Zn-21.5Al-1.5Si/Al接头,分别为60.1MPa和55.6MPa.  相似文献   
9.
为了提高复合材料帽型加筋壁板结构中筋条与蒙皮界面处的连接强度,引入Z-pin三维增强技术。制备了Zpin增强帽型接头试样,并对其进行拉伸试验,研究Z-pin对帽型接头界面增强机理及不同Z-pin体积分数、直径及加载跨距对筋条与蒙皮界面处连接性能的影响规律。结果表明:Z-pin直径为0.5mm、植入角度为90°时,在体积分数0%~1.0%范围内,Z-pin增强帽型接头拉伸强度随着体积分数的增加而增加,增长趋势随体积分数增加而减缓,含1.0%Zpin增强帽型接头比未增强接头强度提高了31.2%,在体积分数1.0%~1.5%范围内,Z-pin增强帽型接头拉伸强度呈降低趋势;Z-pin直径对帽型接头拉伸强度影响不显著;随着加载跨距的增加,含0.5%(直径0.5mm)Z-pin增强帽型接头伴随有失效模式转变,拉伸强度呈现降低趋势。  相似文献   
10.
针对某型飞机机体机翼左接头部位存在裂纹的现象.对裂纹产生原因进行了分析,并利用有限元软件,对接口部位的简化模型进行两种危险情况加载计算,结果表明此裂纹为疲劳裂纹.在修理中采用加强件代替原垫圈提高了疲劳强度。  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号