A novel satellite image encryption algorithm based on hyperchaotic systems and Josephus problem

With the rapid growth of the number of Earth observation satellite (EOS) supporting critical applications, it is required to improve the security techniques to protect the sensitive data and images during the transmission between the satellites and the ground stations. This paper introduces a new satellite image encryption algorithm based on the Linear Feedback Shift Register (LFSR) generator, SHA 512 hash function, hyperchaotic systems, and Josephus problem. LFSR generates a matrix that is used to construct the 512-bits value of the hash function. These bits are used to set the initial values and parameters of the proposed encryption algorithm. Firstly, the six dimensions (6-D) hyperchaotic system is divided into three parts, where every two equations are considered as one part. Secondly, the 1-D hyperchaotic logistic-tent system is considered as the controller to select one part. The selected part is used to generate a matrix that is XORed with the original image. Thirdly, the scrambling operation by Josephus sequences is applied to the output of the previous step by scrambling the rows and the columns according to the selected part to produce the pre-encrypted image. Finally, if the number of iterations is less than the required number which is considered as a parameter of the secret key, the previous operations will be repeated in the pre-encrypted image; otherwise, the pre-encrypted image is considered as the final cipher image. Experimental and analyses results show that the proposed algorithm has good performance in terms of high level of security, large enough key-space, tolerance to Single Event Upsets (SEU) as well as low time complexity.     

一种基于OPTICS聚类的仅测角导航目标检测算法

仅测角自主导航方法具有设备简单、复杂度低，功耗低的优点，在空间任务中具有广泛的应用前景.针对中远距离下空间目标特征少的特点，提出了一种利用基于OPTICS聚类算法的空间目标检测方法，可用于仅测角导航过程中的目标检测.对原始星图进行预处理提取星点及目标点，并结合星图识别的结果选择部分帧，使用经过改进的OPTICS聚类方法获得目标运动轨迹.最后，使用本文中的算法对软件仿真出的含有目标的高精度星图进行处理验证了算法的可行性.在卫星相对于空间目标抵近过程中，目标检测的水平误差及垂直误差小于0.15°的帧数分别占到了85.4%以及99.6%.相比AVANTI实验中的目标检测方法，减少了在轨任务中相关参数的调节，进一步提升了算法的自主性.     

Near-wall topological patterns and flow structures over a simplified Danaus plexippus model

Studies on the high-lift mechanisms of butterfly gliding flights shed light on the design of the micro air vehicles. The flow field around a simplified Danaus plexippus model is investigated using the hydrogen bubble visualization and the Particle Image Velocimetry (PIV) techniques. There are three near-wall topological patterns with different Angles of Attack (AoAs): the separation bubble, the Leading-Edge Vortex (LEV) and the high AoAs flow. For the separation bubble pattern, two saddles and two foci form in the middle of the model. The features of the LEV pattern are the leading-edge separation lines. The topological characteristics of the separation lines are changed by the interaction between the LEV and the Wing-Tip Vortex (WTV). For the high AoAs flow pattern, four unstable foci are found at the forewing and the hindwing respectively. The angle between the trajectory of the WTV and the model increases with increasing AoA even though the slope of the WTV angle versus AoA curve declines at the moderate AoAs.     

一种基于张氏标定法的单目相机改进标定算法

单目视觉在地面机器人等无人导航系统中的应用越来越广泛，而相机参数的标定是利用视觉进行导航的基础性工作。标定结果的好坏，直接影响导航性能和定位精度。主要考虑单目相机的径向畸变，基于张正友平面标定法，通过利用Matlab进行图像预处理、利用OpenCV进行Harris角点检测和亚像素精确化等方法在角点提取精度等方面进行了改进，通过重投影法对标定结果进行了评估，并将其与Matlab相机标定工具箱Toolbox_calib所得结果进行了比较。实验结果表明，改进的标定算法标定结果精度更高，并且对多个摄像头传感器均有效，适用性强。     

回流燃烧室流动特性试验

为了揭示有/无燃烧状态下燃烧室热态和冷态流场的特征和流动特性，针对某型回流燃烧室单头部试验件，使用粒子图像测速仪（PIV），测量燃烧室燃烧状态下不同截面处的热态流场，以及没有燃烧状态下不同截面处的冷态流场，探讨不同总压损失系数对回流燃烧室热态/冷态流场特征及流动特性的影响。研究表明:随着总压损失系数的增大，冷态条件下各截面流场结构基本保持不变，如射流孔穿透深度、射流角度、回流区位置及大小、流线等基本保持一致，但是各位置点速度大小逐渐增大。热态条件下各截面流场随着总压损失系数增大，流场结构也基本保持不变；相同总压损失系数时，热态流场与冷态流场存在差异，燃油喷射与气流的相对运动将会对燃烧室头部的流场结构造成影响，速度较冷态流动时略微增大。      

失重性骨质疏松腰椎力学性能研究

航天员在长期失重环境影响下,会容易造成椎体失重性骨质疏松。为了探究骨质流失对腰椎承载能力的影响,设计了不同骨密度的腰椎力学仿真,通过图像处理建立了腰椎三维模型,利用有限元算法得到腰椎应力分布,对比了不同材料属性腰椎模型应力结果。结果表明:骨质疏松腰椎的应力值较正常腰椎变小,而形变量却明显增大。可以看出,骨质流失时,会导致腰椎骨骼材料性能发生变化,使腰椎形变量增大,并且使腰椎结构承载能力降低。     

基于射线追踪的快速雷达图像仿真方法

为了解决目标识别、隐身目标设计等研究领域对雷达图像需求日益增加的问题,提出了一种基于射线追踪的快速雷达图像仿真方法。该方法利用射线追踪计算每一个射线管的散射电场及其在雷达成像平面的投影坐标,通过将所有射线管的贡献在像域进行累加得到1幅二维雷达图像。通过对不同路径射线的聚类,可实现对散射贡献的分离,从而建立目标部件与强散射源的对应关系,并对复杂目标雷达图像进行解释。给出了Slicy目标的快速雷达图像仿真与算例分析,分析结果表明:基于射线追踪的快速雷达图像仿真方法可对复杂雷达图像进行有效预测,并能对强散射源进行成因分析。     

Manifold structure preservative for hyperspectral target detection

A nonparametric method termed as manifold structure preservative (MSP) is proposed in this paper for hyperspectral target detection. MSP transforms the feature space of data to maximize the separation between target and background signals. Moreover, it minimizes the reconstruction error of targets and preserves the topological structure of data in the projected feature space. MSP does not need to consider any distribution for target and background data. So, it can achieve accurate results in real scenarios due to avoiding unreliable assumptions. The proposed MSP detector is compared to several popular detectors and the experiments on a synthetic data and two real hyperspectral images indicate the superior ability of it in target detection.     

不同流速比超声速混合层气动光学效应研究

针对不同流速比混合层流场气动光学效应问题，首先采用大涡模拟数值方法进行了数值仿真，其次用光线追迹方法进行了气动光学效应仿真，最后对混合层的气动光学效应进行了评价。结果表明，混合层流场涡结构与光程差极小值存在一一对应关系，并且其流速比低的混合层气动光学效应更加严重。同时，研究了不同光学参数对斯特列尔比的影响，得到了相应的规律。     

抑制复原图像振铃波纹的频域循环边界算法

提出了一种基于Wiener滤波的频域循环边界复原算法,并给出了有效的规整化表达式和信噪比估算方法.复原算法首先将原观测图像按反射对称的方式延拓,形成一个新的观测图像(称为延拓图像);然后,用Wiener滤波算法复原延拓图像,并取延拓图像的复原图像的主值序列作为原观测图像的复原图像.对延拓图像在频域进行复原处理时,需要使用FFT(Fast Fourier Transform)技术,将延拓图像进行周期延拓,因其结合边界在垂直方向上的梯度为零,且边界平滑满足微分条件,抑制了复原图像的振铃波纹.复原过程中,将噪声与原始图像的功率谱之比规整化为原观测图像信噪比的函数.实验结果表明,该算法对周边区域梯度变化较大的观测图像复原效果较好.