无人平台复杂地形探测的视触融合方法

为提高无人平台在复杂环境中的地形探测能力以及解决在小样本数据下识别地形困难的问题，提出了一种无人平台复杂地形探测的视触融合方法。在原始宽度学习的基础上，建立了多模态级联特征节点宽度学习框架。首先进行触觉和视觉初步特征提取和融合特征提取，随后将融合特征矩阵经宽度学习分类器得到地形识别的结果。最后，在自建的视觉-触觉地形 (V-T2)数据集进行了实验验证。结果表明，相比于传统的融合算法，提出的融合算法有很好的准确性和鲁棒性，为无人平台地形探测提供了有效的策略。     

基于CDKF的快速协方差交叉融合跟踪算法研究

随着目标抗干扰能力的增强，单一寻的制导方式很难完成对目标的稳定跟踪和精确打击，需采用多种探测器作为传感器，提供多种观测数据以实现对目标的稳定跟踪和精确打击。建立了适当的目标运动模型和观测模型，利用中心差分卡尔曼滤波（CDKF）变换处理模型的非线性问题，避免了求解复杂的雅克比矩阵。对于分布式多传感器融合，传统的方法多采用协方差交叉（CI）融合方法，但是这类方法需要寻优求解。而快速协方差交叉（FCI）则不需要进行寻优过程，且计算量小。在此基础上，提出了用于多传感器目标跟踪的CDKF-FCI融合算法。最后，对算法进行了仿真分析，并进一步验证了提出算法的有效性。     

复合导引头目标信息融合抗干扰技术研究

复合导引头由微波制导至红外制导的过程中,受干扰条件的影响,有可能出现错误交班。为了提高导引头应对干扰的能力,设计了一种微波/红外目标信息融合抗干扰方法,该方法利用微波与红外目标信息进行关联度检测,对跟踪微波与红外运动的趋势进行在线实时判断,及时做出干扰误交班判定。在进行了干扰误交班的情况下,MATLAB数字仿真结果表明,该算法能够准确有效地给出干扰误交班判断,从而保证了在干扰环境下对目标跟踪的稳定性。     

平台式重力仪航空重力测量数据后处理技术研究

针对航空重力测量对数据后处理的要求,结合平台式重力仪系统的组成与工作原理,在重力异常信号的频域特征基础上,设计出一套有严格频域规范的航空重力数据后处理流程,并对某海域实测数据进行了处理。结果表明,重力异常值内符合精度为12条东西测线达到0.43mGal/140s和0.84mGal/100s,4条南北测线达到0.39mGal/140s和0.79mGal/100s;以同测线GT-2A单次测量结果为标准值统计标准差,12条东西测线为0.72mGal/140s和0.98mGal/100s,4条南北测线为1.41mGal/140s和1.53mGal/100s。结果表明,设计的航空重力测量数据后处理方法可以实现重力异常信号的高精度提取。     

利用增量相位和星光仰角增强XNAV

针对X射线脉冲星导航系统(XNAV)中过程噪声统计特性难以准确获取，对其不当假设导致滤波器估计性能不佳的问题，提出基于自适应差分卡尔曼滤波器(ADDF)的多信息融合算法。为了降低导航误差，在传统脉冲星计时观测的基础上，增加恒星星光仰角及两个时刻间的相位增量观测量，共同增强XNAV。首先，分别建立计时观测模型、相位增量模型及星光仰角模型；然后将多信息测量模型集成到卫星轨道动力学方程中，以建立ADDF滤波模型；最后对所提方法进行仿真验证。实验结果表明，在相同的初始状态和初始噪声误差条件下，与传统X射线脉冲星导航算法相比，多信息融合算法能将导航位置估计精度提高70%以上，位置估计误差降低到 200 m 左右，速度估计精度提高40%以上，且ADDF性能优于无迹卡尔曼滤波器。     

Bayesian network-based extraction of lunar impact craters from optical images and DEM data

Impact craters are among the most noticeable geomorphological features on the planetary surface and yield significant information about terrain evolution and the history of the solar system. Thus, the recognition of impact craters is an important branch of modern planetary studies. Aiming at addressing problems associated with the insufficient and inaccurate detection of lunar impact craters, a decision fusion method within the Bayesian network (BN) framework is developed in this paper to handle multi-source information from both optical images and associated digital elevation model (DEM) data. First, we implement the edge-based method for efficiently searching crater candidates which are the image patches that can potentially contain impact craters. Secondly, the multi-source representations of an impact crater derived from both optical images and DEM data are proposed and constructed to quantitatively describe the two-dimensional (2D) and three-dimensional (3D) morphology, consisting of Histogram of Oriented Gradient (HOG), Histogram of Multi-scale Slope (HMS) and Histogram of Multi-scale Aspect (HMA). Finally, a BN-based framework integrates the multi-source representations of impact craters, which can provide reductant and complementary information, for distinguishing craters from non-craters. To evaluate the effectiveness and robustness of the proposed method, experiments were conducted on three lunar scenes using both orthoimages from the Lunar Reconnaissance Orbiter (LRO) and DEM data acquired by the Lunar Orbiter Laser Altimeter (LOLA). Experimental results demonstrate that integrating optical images with DEM data significantly decreases the number of false positives compared with using optical images alone, with F₁-score of 84.8% on average. Moreover, compared with other existing fusion methods, our proposed method was quite advantageous especially for the detection of small-scale craters with diameters less than 1000 m.     

A new modeling scheme for powered parafoil unmanned aerial vehicle platforms: Theory and experiments

A novel framework is established for accurate modeling of Powered Parafoil Unmanned Aerial Vehicle (PPUAV). The model is developed in the following three steps: obtaining a linear dynamic model, simplifying the model structure, and estimating the model mismatch due to model variance and external disturbance factors. First, a six degree-of-freedom linear model, or the structured model, is obtained through dynamic establishment and linearization. Second, the data correlation analysis is adopted to determine the criterion for proper model complexity and to simplify the structured model. Next, an active model is established, combining the simplified model with the model mismatch estimator. An adapted Kalman filter is utilized for the real-time estimation of states and model mismatch. We finally derive a linear system model while taking into account of model variance and external disturbance. Actual flight tests verify the effectiveness of our active model in different flight scenarios.     

一种面向复杂体系作战的多源信息融合处理方法

研讨了面向复杂体系化作战的信息融合技术，提出了一种基于中心航迹关联的融合架构，设计了面 向多源异构数据的信息融合处理方法。经过多机飞行场景下的数据仿真测试，能够有效解决多源传感器多目标 环境下目标关联判断问题。     

拓扑数据分析在复杂脑网络分析中的应用

针对复杂脑网络分析中网络结构变化阈值选择中没有公认的标准确定合适阈值这一问题，基于拓扑分析中的持续同调性理论，本文提出一种多尺度大脑网络建模分析方法，该方法在大脑全尺度距离范围之内，通过不断增加阈值，运用Rips过滤算法捕获网络的动态持续拓扑特征，并用条形码和持续图对拓扑特征可视化，最后通过计算持续图之间的Bottleneck距离和Wasserstein距离分析持续特征的稳定性。实验结果表明，该方法能更准确地提取大脑网络的拓扑结构特征并提高诊断分类的准确性。