首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   1293篇
  免费   353篇
  国内免费   242篇
航空   1186篇
航天技术   229篇
综合类   188篇
航天   285篇
  2023年   32篇
  2022年   72篇
  2021年   65篇
  2020年   72篇
  2019年   66篇
  2018年   67篇
  2017年   88篇
  2016年   99篇
  2015年   70篇
  2014年   97篇
  2013年   77篇
  2012年   99篇
  2011年   113篇
  2010年   110篇
  2009年   95篇
  2008年   82篇
  2007年   88篇
  2006年   64篇
  2005年   59篇
  2004年   53篇
  2003年   42篇
  2002年   51篇
  2001年   28篇
  2000年   31篇
  1999年   13篇
  1998年   24篇
  1997年   16篇
  1996年   19篇
  1995年   13篇
  1994年   15篇
  1993年   16篇
  1992年   21篇
  1991年   7篇
  1990年   8篇
  1989年   6篇
  1988年   9篇
  1987年   1篇
排序方式: 共有1888条查询结果,搜索用时 15 毫秒
1.
2.
李增聪  陈燕  李红庆  田阔  王刚  高峰  王博 《航空学报》2021,42(9):224616-224616
为了提高航天器回转曲面加筋型连接结构的集中力扩散效率,需要开展回转曲面加筋集中力扩散结构设计。传统放射肋设计方法普遍依赖设计经验、难以满足集中力高效扩散需求。因此,提出一种面向集中力扩散的回转曲面加筋拓扑优化方法。第1步,建立了一种基于各向异性过滤技术的集中力扩散拓扑优化方法,保证拓扑优化结果满足回转曲面加筋制造工艺要求;第2步,提出了一种基于网格变形技术的拓扑优化结果智能重构方法,可高效准确地对回转曲面加筋拓扑优化结果进行模型自动重构。基于所提出方法,以卫星平台对接环这种典型的回转曲面加筋壳为对象开展算例研究,并将优化结果与传统放射肋设计结果进行对比。结果表明,所提出的优化方法可得到加筋构型清晰、满足回转曲面加筋制造工艺要求的优化结果,且具有集中力扩散效率高、网格质量依赖性低、拓扑特征重构高效等优点。  相似文献   
3.
《中国航空学报》2021,34(2):576-585
Creep feed profile grinding of the fir-tree blade root forms of single crystal nickel-based superalloy was conducted using microcrystalline alumina abrasive wheels in the present study. The grinding force and the surface quality in terms of surface topography, subsurface microstructure, microhardness and residual stress obtained under different grinding conditions were evaluated comparatively. Experimental results indicated that the grinding force was influenced significantly by the competing predominance between the grinding parameters and the cross-sectional root workpiece profile. In addition, the root workpiece surface, including the root peak and valley regions, was produced with the large difference in surface quality due to the nonuniform grinding loads along the root workpiece profile in normal section. Detailed results showed that the surface roughness, subsurface plastic deformation and work hardening level of the root valley region were higher by up to 25%, 20% and 7% in average than those obtained in the root peak region, respectively, in the current investigation. Finally, the superior parameters were recommended in the creep feed profile grinding of the fir-tree blade root forms. This study is helpful to provide industry guidance to optimize the machining process for the high-valued parts with complicated profiles.  相似文献   
4.
《中国航空学报》2021,34(4):253-264
In the 3D free bending forming system, the bending die can be designed either in a sliding type or rolling friction type. Bending die-based sliding friction type is often called normal bending dies; however, the bending dies-based rolling friction type includes bending die-based roller type and ball type in structure. In the current study, the impact of three bending dies on the forming force, and the bent tube quality was investigated. The obtained results showed that the tangential stresses and strains of the tubes formed by the bending die-based roller type were the smallest among the three bending dies. Besides, the spherical bearing force PU was reduced drastically after using the roller type and ball type compared to the sliding friction type. Moreover, the uniformity of the wall thickness distribution of the tubes formed by the roller type and ball type was better than those obtained from the sliding friction type. In addition, the cross-section distortion rate was reduced by 2.8% using the roller type, and 1.8% using ball-type compared to the sliding friction type.  相似文献   
5.
针对硬质合金刀具高速内冷铣削AISI304不锈钢时,切削力大、切削温度高及加工表面质量低的问题。基于响应曲面中心复合设计方法进行高速内冷铣削实验,建立了铣削力分量二阶回归预测模型,并进行了实验验证。对比了干式与内冷铣削后的加工表面质量,分析了铣削参数对铣削力分量的影响规律,以铣削力分量最小为目标优化了铣削参数。结果表明:进给力和径向力的预测值与实验值的误差分别为4. 77%和6. 16%;内冷铣削的Ra为0. 193~0. 327μm;对铣削力分量的影响是铣削深度转速进给量,随着铣削深度和转速的增加,进给力先升高后降低,径向力逐步增加,铣削深度与转速的交互作用对进给力和径向力的影响显著;转速11 643. 63 r/min、铣削深度1 mm、进给量0. 08 mm/r为最优铣削参数组合。  相似文献   
6.
为了快速准确地计算卡箍管路系统的振动响应,提出了基于测试数据的卡箍非线性等效建模方法。对卡箍直管系统进行低幅值激励的模态测试,利用试验数据对有限元模型进行修正,识别卡箍线性刚度、线性阻尼参数。对卡箍直管系统开展不同激励水平下的恒力测试,通过样条插值多项式法将恒力频响函数转换为恒位移、恒速度频响函数,并进一步识别卡箍非线性等效刚度、非线性等效阻尼,建立了考虑卡箍非线性的等效动力学模型。研究表明:该卡箍等效动力学模型的预测频响函数与试验频响函数的最大误差仅为-6.9%,可以有效地反映卡箍实际的刚度、阻尼特性,对解决卡箍管路系统的振动响应分析具有重要的指导意义。   相似文献   
7.
覃建秀  张会强 《航空动力学报》2020,35(11):2449-2455
为确定工程中冷态条件下获得的推力室声学特性能否表征真实条件下的声学特性,研究了冷态无流动、热态气相流动和湍流两相燃烧三种状态下推力室声学振型及其阻尼特性。在推力室稳态流场中的有限区域施加数值定容弹,激发其具有多模态声学振型的大幅值压力振荡,采用衰减时间和半带宽来定量评价所激发的不同声学振型压力振荡衰减快慢,进而获得其阻尼特性。在相同过载比的数值定容弹激励下,在冷态条件下能激发包含更多声学振型压力振荡,且该振荡衰减时间更长,相同振型压力振荡衰减比热态条件下慢。在冷态条件下,一阶切向振型振幅最大,为最容易被激发声学振型;一阶纵向振型半带宽最小,为最难衰减的振型。在热态条件下,一阶纵向振型为最容易激发声学振型,也为最难衰减声学振型。从所激发的主要振型及其相对衰减的快慢来看,冷态条件下获得的声学特性能够表征真实条件下的推力室的声学特征。  相似文献   
8.
《中国航空学报》2020,33(10):2794-2806
The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.  相似文献   
9.
为了研究新型反推装置对翼身融合分布式推进系统气动性能的影响,将机身简化为二维模型,利用数值模拟的手段来研究攻角、反推开度,以及风扇打开或关闭对飞行参数的影响,为翼身融合分布式推进系统的反推装置设计提供初步的意见和建议。结果显示:反推闭合和风扇打开之后该机型的升力系数和俯仰力矩系数都会有较大增加;随着反推开度的增加,升力系数和俯仰力矩系数也随之增加;来流攻角对翼身融合分布式推进系统的气动性能也有较大影响。   相似文献   
10.
为了确定实际飞行使用条件下,发动机状态变化时,进排气系统损失对飞机气动特性的影响,本文针对翼吊短舱形式的发动机开展了缩比模型风洞试验,分别进行了基本构型与起飞构型下,马赫数0.1、0.15、0.2,攻角0°~15°变化,5种不同发动机状态条件下的风洞试验,通过数据分析,明确了该类型发动机推/阻力划分的基本方法,分析了发动机状态变化时飞机气动特性的改变及修正方法。风洞试验结果表明:发动机状态变化对飞机升阻特性影响明显,飞机设计研发阶段不能仅对短舱通流模型,或单一发动机状态下的动力短舱模型进行损失修正,必须建立合理的推/阻划分体系,对实际使用条件下,发动机状态变化引起的进排气损失进行修正。  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号