Investigation on the Thermal Conductivity of 3-Dimensional and 4-Directional Braided Composites

It is vital to choose a factual and reasonable micro-structural model of braided composites for improving the calculating precision of thermal property of 3-D braided composites by finite element method (FEM). On the basis of new microstructure model of braided composites proposed recently, the model of FEM calculation for thermal conductivity of 3-dimennsional and 4-directional braided composites is set up in this paper. The curves of coefficient of effective thermal conductivity versus fiber volume ratio and interior braiding angle are obtained. Furthermore, comparing the results of FEM with the available experimental data,the reasonability and veracity of calculation are confirmed at the same time.     

Schumann resonance frequency and conductivity in the nighttime ionosphere of Mars: A source for lightning

We have solved the Maxwellian equations of electromagnetic waves which oscillate within the cavity formed in the lower ionosphere of Mars between 0 and 70?km. The electrical conductivity and Schumann Resonance (SR) frequencies are calculated in the lower ionosphere of Mars, in the presence of a major dust storm that occurred in Martian Year (MY) 25 at low latitude region (25°–35°S). It is found that the atmospheric conductivity reduced by one to two orders of magnitude in the presence of a dust storm. It represents a small dust layer at about 25–30?km altitudes where lightning can occur. We also found that the SR frequencies peak at?～18?km with values 19.9, 34.5 and 48.8?Hz for the modes l?=?1, 2 and 3, respectively, in the non-homogeneous medium. Our results indicate that practical or measurable values of SR are dependent on the altitudes.     

石墨烯/聚合物纳米复合材料研究进展

介绍了近年来石墨烯改性聚合物和功能化石墨烯改性聚合物纳米复合材料的研究现状。其中,在石墨烯改性聚合物方面,主要论述了石墨烯改性聚乙烯(PE)、聚丙烯(PP)、聚苯乙烯(PS)以及聚苯胺(PANI)纳米复合材料的制备方法和性能改善;在功能化石墨烯改性聚合物方面,主要论述了二苯基甲烷二异氰酸酯(MDI)、十八烷基胺(ODA)、氯化铝(Al Cl3)等对石墨烯的修饰以及改性后的石墨烯对聚合物的影响。最后,对石墨烯/聚合物纳米复合材料的潜在应用和发展前景做出了展望。     

飞机复合材料雷击防护层设计与应用

结合复合材料自身的弱导电性特点,通过在其表面增加导电功能层的方式解决复合材料的防雷击问题.设计了复合材料表面火焰喷涂铝涂层、粘接铝箔网及粘接铝箔三种雷击防护层形式,并对三种防护层的制备工艺特点、导电性及适用性进行了研究和分析.结果表明:以上三种雷击防护层显著地提高了复合材料的导电性并具有很好的适用性.     

Modeling the meteoric dust effect on the equatorial electrojet

Dust particles of meteoric origin in the lower E-region can affect the conductivity parameters by varying the effective collision frequency and by causing electron bite outs through the capture of ambient electrons. In magnetized plasma, neutral dust particles can alter the effective collision frequency parameters and thus affect the Pedersen and Hall conductivities in the electrojet region. The Cowling conductivity profile is determined by the height profiles of the Hall and Pedersen conductivities. The collision parameters altered by the neutral dust particles can be considerably different from those estimated from atmospheric models, in the lower E-region heights where dust particles of meteoric origin are known to exist in large numbers. A significant fraction of these dust particles may capture free electrons from the ambient medium and get charged negatively. This can result in reduction in the number density of free electrons especially below the electrojet peak where the dust particles can be present in large numbers, at least on days of large meteor showers. This, in turn, can once again alter the vertical profile of the east–west Hall current driven by the vertical Hall polarization field and under favorable conditions, can even account for the reversal of the electrojet currents below the current peak. Assuming a realistic model for the distribution of neutral dust particles, the conductivity parameters are estimated here. Conditions under which the dust particles can cause partial reversals in the electrojet currents are critically examined here.     

LC9专用挤压型材应用过时效试验

试验并分析了ＬＣ９合金专用挤压型材淬火并人工时效和淬火并人工过时效状态对其电导率、常规力学性能、抗疲劳性能、抗腐蚀性能的影响。另外,在减少淬变形上也做了一些试验。试验结果表明,ＬＣ９合金在过时效状态下有较好的抗腐蚀性能和抗疲劳性能。淬火变形也大大减小。     

用经验模式参数研究电离层发电机效应

本文利用MSIS-86和IRI-86模式的基本参数,求得热层风系和电导率的三维分布;继而从发电机理论得到了电离层电位及层电流密度在北半球的分布和变化。本研究将大量数据统计平均的大气模式参数与热层、电离层理论研究联系了起来。     

碳纳米管薄膜电热特性及其除冰性能

采用碳纳米管薄膜(CNTF)作为电加热元件,研究碳纳米管薄膜对玻璃纤维增强树脂基复合材料结构表面的除冰性能,同时研究其电热性能。SEM14μm左右。XRD表明CNTF样品为微晶结构,结晶度差且含有少量杂质。空气环境通电,升温速率和最高恒定温度随输入电压增大而迅速提高。输入电压为5 V温度95℃。在四次电热循环后,其表面电阻略有升高,均值从2.795Ω到3.870Ω。在9 V输入电压下,CNTF被迅速烧断,CNTF样品电流承载极限在1.8 A左右。利用其焦耳热性能进行除冰,质量为20 g冰块在树脂基玻璃纤维复合材料样品的表面脱落时间为240 s。表明CNTF在飞机除冰领域具有潜在应用价值。