Global Response of Martian Plasma Environment to an Interplanetary Structure: From Ena and Plasma Observations at Mars

As a part of the global plasma environment study of Mars and its response to the solar wind, we have analyzed a peculiar case of the subsolar energetic neutral atom (ENA) jet observed on June 7, 2004 by the Neutral Particle Detector (NPD) on board the Mars Express satellite. The “subsolar ENA jet” is generated by the interaction between the solar wind and the Martian exosphere, and is one of the most intense sources of ENA flux observed in the vicinity of Mars. On June 7, 2004 (orbit 485 of Mars Express), the NPD observed a very intense subsolar ENA jet, which then abruptly decreased within ∼10 sec followed by quasi-periodic (∼1 min) flux variations. Simultaneously, the plasma sensors detected a solar wind structure, which was most likely an interplanetary shock surface. The abrupt decrease of the ENA flux and the quasi-periodic flux variations can be understood in the framework of the global response of the Martian plasma obstacle to the interplanetary shock. The generation region of the subsolar ENA jet was pushed towards the planet by the interplanetary shock; and therefore, Mars Express went out of the ENA jet region. Associated global vibrations of the Martian plasma obstacle may have been the cause of the quasi-periodic flux variations of the ENA flux at the spacecraft location.     

短肢剪力墙结构的自由振动特性分析

采用连续化方法导出了短肢剪力墙结构在任意高度侧向集中荷载的作用下的侧移曲线方程，由此得到该结构的抗侧移柔度系数，进而得出结构的抗侧移刚度矩阵。应用抗侧移刚度矩阵对各种整体性系数和肢强系数的短肢剪力墙结构进行了动力特性分析，研究其对结构动力特性的影响。结果表明，当肢强系数不变时，随整体性系数的增加，短肢剪力墙的前两阶振型的振动周期显著减小，而其他高阶振型的振动周期变化很小；当整体性系数不变时，短肢剪力墙的前两阶振型的振动周期随肢强系数的增加显著减小，而其他高阶振型的振动周期变化不大。     

8mm辐射计特性参数测试及定标

文中简介了小口径天线毫米波辐射计定标系统的设计原理、结构、输出亮温的计算模型 ,研究了从液氮温度到室温范围内进行多点定标的方法 ,并对 8mm辐射计进行了特性参数测试及定标实验 ,得出了微波辐射计的定标方程和灵敏度、线性度、稳定度以及积分时间等指标。在该系统上按给定的程序进行定标 ,精度为 1 .0 6K。     

剪切载荷作用下碳/环复合材料层压板的损伤扩展特性

本文对含中心穿透裂纹的碳/环复合材料层压板在剪切载荷作用下的损伤扩展规律进行了研究。通过对以[±45/O_6]_s、[(±45)_3/O_2]_s、[O/±45/O]_s和[90/±45/90]_s四种层压板为主的多种层压板进行试验研究和理论计算,对工程上常用的以O°、±45°、90°三种铺层构成的各种π/4层压板在含裂纹时的板内应力分布、裂纹扩展方向、断裂机理和含裂纹时的极限强度(剩余强度)进行了分析。试件由T300/648E制成。研究表明,铺层组分比例的不同对裂纹的扩展方向和含裂纹层压板的极限强度有较大的影响。本文在探讨损伤扩展规律的基础上,也为工程应用提供了有意义的结果。     

智能控制大功率氨压机制冷系统

本文将模糊控制、神经元控制等智能控制技术成功地应用于大型活塞式氨压机制冷系统，实现了恒转矩负载的变频调速节能。实际运行结果证明，该智能控制的大功率氨压机制冷系统工作稳定、控制精度高、节能效果显著，具有很好的经济效益及推广应用价值。     

基于三机冷备份的遥感器计算机系统冗余设计

文章对当前比较流行的计算机冗余模型进行了分析和比较,制定出了三机冷备份的冗余计算机结构,并对关键电路进行了设计。     

用于遥感卫星数传的新型波导阵列组合天线

从新的设计理念出发，提出一种新型的波导十字阵列组合辐射天线替代了赋形反射面天线，用于低轨遥感卫星的数传系统。文中论述了该天线的设计思路、设计过程，并列出了天线的主要性能。最后还简述了该天线在国内卫星上的应用及我国未来低轨遥感卫星数传天线的发展趋势。该天线已在我国多个卫星上成功应用。这种波导阵列组合天线结构紧凑、尺寸小，具有与国外通用的赋形反射面天线基本类似的性能，可达到星载数传天线的预定要求，而且为星载遥感器及其他载荷留出了更大的对地安装空间。     

Tether Satellite System Collision Study

A study was performed to determine the probability of collision with resident space objects and untrackable debris for the tether component of the Tethered Satellite System (TSS) after it broke away from the Space Shuttle orbiter (mission STS-75) in February 1996. Both an analytical and a numerical approach were used in this study, and the results obtained with these two methods were found to be in good agreement. These results show that the deployed tether is expected to have been impacted by several particles 0.1mm or larger in size. The probability of collision with objects 10cm in size or larger was on the order of 10^–3 per month. Since the severed tether reentered within one month after deployment, the collision hazard to other objects while in orbit was small. The analytical methods used in this study are useful for tether collision evaluations in general.     

带滑移铰空间机械臂惯性空间轨迹的复合自适应跟踪控制

讨论了载体的位置与姿态均不受控制的漂浮基带滑移铰空间机械臂的控制问题。动力学分析表明，结合系统动量及动量矩守恒关系得到的运动Jacobi关系及系统动力学方程将是系统惯性参数的非线性函数，借助于增广变量法，我们得到了与惯性参数呈线性关系的系统广义Jacobi矩阵及系统控制方程，以此为基础，针对系统中存在未知惯性参数的情况，设计了一种末端抓手惯性空间期望轨迹跟踪的复合自适应控制方案，此控制方案的优点在于不需要测量空间机械臂载体的位置及移动的速度，加速度，仿真运算证实了方法的有效性。     

太阳风质子束流的演化

太阳神飞船观测表明，太阳风高速流中质子束分量相对于核分量的密度随日心距离增加而增加．提出解释这一观测现象的机理并给出二维数值模拟结果．由于阿尔芬波速随日心距离增加而减少，第二支左旋波将与更多的质子共振，把部分原来属于核分布的质子拉到束分布中来．用数值模拟方程方法求解回旋波共振导致的准线性扩散方程，数值结果与观测结果相符合．