用于RFOG的光学锁相环仿真研究

谐振式光纤陀螺是实现光纤陀螺小型化发展的重要方向，具有广阔的应用背景和很好的应用前景。而激光器作为谐振式光纤陀螺的关键设备之一，其性能直接影响着谐振式光纤陀螺的精度。为了解决谐振式光学陀螺的背反噪声问题，采用光学锁相环技术对激光器频率进行锁定的方案，通过对光学锁相环进行建模、仿真分析，重点研究了锁相原理及锁相方案，验证了基于电流调制的半导体激光器的光学锁相环可行性。最终验证了光学锁相环的相位锁定效果，实现了两激光器输出频率差值稳定的设计目标。     

三角网格面自动铺丝定角度路径规划算法

研究三角网格曲面上的路径规划问题,以局部测地线为补充,提出了改进的定角度初始路径规划算法。该算法避免了传统参数化求解过程的无解和多解情况,尤其适用于曲率变化较大的复杂曲面和拼接曲面。采用等距覆盖算法来获得均匀的满铺路径,并分别提出基于路径样条线末端延伸和芯模曲面整体延拓的两种边界处理思路,以解决偏移路径无法到达曲面边界的问题。以某机翼模型为算例对上述算法进行验证,利用计算机辅助三维交互应用(Computer aided three-dimensional interactive application,CATIA)的逆向工程模块实现了完整的算法可视化,建立了三维建模软件与路径规划算法的系统关系。验证表明本文提出的算法可靠、系统、适应性强,具有工程应用价值。     

Influence of thickness and initial groove angle in M–K model on limit strain of 7B04 by considering through-thickness stress

Marciniack–Kuczinski (M–K) model is widely used to predict material’s forming limit curve (FLC). The prediction of FLC traditionally neglected through-thickness normal stress. However, it cannot be neglected in some forming processes. Much work has been done to study the effect of through-thickness normal stress on FLC with constant through-thickness normal stress or constant ratio of through-thickness normal stress and maximum principal stress. In addition, based on Nakazima test process, the ratio of through-thickness normal stress and maximum principal stress has been derived, which was a function of instantaneous thickness and loading path. Here, initial groove angle in M–K model was not considered. In this paper, uniaxial tension tests and Nakazima tests were performed on 7B04 aluminum alloy. Based on Hill 48 yield criterion and M–K model, the prediction model of FLC was established. The increase of thickness can enhance FLC. Meanwhile, it is necessary to consider through-thickness normal stress and initial groove angle in prediction model. On the left side of FLC, the effect of initial groove angle on FLC is weakened by increasing sheet thickness. On the right side of FLC, the effect of initial groove angle on FLC is strengthened by increasing sheet thickness. On the right side of FLC, the relation between limit strain points with different thicknesses is linear under one certain loading path. Thickness has decisive effect on through-thickness normal stress level and the changing trendy of through-thickness normal stress during calculation is different under different stress condition.     

超临界CO2技术对空心/实心石英混编纤维表面改性

采用热处理+溶剂浸洗+超临界CO2技术对空心/实心石英混编纤维表面进行预处理,同时利用超临界流体的携带与渗透作用,将KH-560偶联剂引入纤维表面进行改性。采用接触角测试、表/界面张力测试、树脂吸附量测试、力学性能测试、扫描电镜等分别测试纤维表面能、胶液表面张力与接触角、胶液与纤维浸润性,观察纤维表面形貌结构,分析复合材料的力学与介电性能。结果表明:采用热处理+溶剂浸洗+超临界CO2技术可有效去除空心/实心石英混编纤维表面浸润剂,提高纤维表面能,促进胶液与纤维的完全浸润,最终改善复合材料力学与介电性能。     

Methane pyrolysis in preparation of pyrolytic carbon: Thermodynamic and kinetic analysis by density functional theory

The density functional theory has been successfully applied in analyzing pyrolytic carbon deposition by methane pyrolysis from the view of thermodynamics and kinetics based on a total number of 39 elementary reactions. M06-2X/def2-TZVP level was employed to optimize species structures and locate the transition states. The enthalpy changes and Gibbs free energy changes of all the reactions in the temperature range of 298.15–1800 K were derived with optimized species. Results show that the reacting temperature should be above 1200 K based on the equilibrium constant analysis, which is consistent with the typical reaction temperature adopted in experiments. Potential energy surface profiles report that radical attacking reactions have lower energy barriers than those direct decomposition reactions, especially hydrogen radical attacking reactions. The energy barriers of the first steps, dehydrogenations of methane and ethylene, are 272.4 kJ·mol⁻¹ and 288.9 kJ·mol⁻¹ at 1200 K, which are very close to the experimental activation energy for methane pyrolysis. The most favorable decomposition reaction path is the path of hydrogen radical attacking reactions. The highest energy barrier of the path at 1200 K is 185.7 kJ·mol⁻¹ presented by the C–H bond breaking in ethynyl attacked by hydrogen radical.     

基于波长控制的光纤陀螺标度因数温度性能提高方法

光纤陀螺的标度因数与光纤环的长度、直径及光源的平均波长有关。在温度条件下，光纤环的长度、直径及光源的平均波长均会发生变化，进而导致光纤陀螺在高低温下的标度因数不同，影响温度环境下的光纤陀螺标度因数的重复性。提出了一种基于光纤陀螺波长控制的标度因数温度性能提高方法，该方法在光源驱动电路的桥式回路中增加了铂电阻组件，从而可自动调节光纤陀螺光源的管芯温度，进而控制光源平均波长的变化，以抵消光纤环有效面积因温度变化而对标度因数产生的影响，提高温度环境下光纤陀螺的标度因数重复性。试验表明，该方法将未补偿情况下光纤陀螺全温范围内的标度因数重复性(1σ)由271×10-6~280×10-6减小到了32.5×10-6~43.5×10-6，标度因数重复性误差减小了84%~88%，并验证了该方法的有效性。     

超低温用碳纤维增强树脂基复合材料的性能研究

根据低温液氧贮箱的缠绕工艺与特殊使用环境要求,分别针对3种自制的环氧树脂体系进行系统的工艺特性与低温抗裂纹性能研究。在此基础上以T700纤维复合材料为研究对象,详细考察其在超低温和高低温循环条件下的力学性能稳定性,并对其液氧相容性进行测试。最终以小型碳纤维复合材料筒体进行综合性能验证。研究结果表明,SFC-3环氧树脂具有较好的缠绕工艺特性,且在超低温和高低温交变条件下具有优异的抗裂纹特性。T700/SFC-3环氧复合材料分别经过高低温交变和超低温处理后,拉伸性能保留率在92%以上,且该复合材料具有良好的液氧相容性。T700/SFC-3环氧树脂复合材料筒体具有极好的耐高低温稳定性和气密性。     

飞行器新型碳基复合材料表面高温测量方法

本文针对飞行器新型碳基复合材料表面的高温测量问题，介绍了测量方法、传感器的安装方式、高温胶黏剂技术与工艺，传感器与热防护技术以及试验测试，并归纳了该方法的技术特点。     

中国上市公司收入分配与所有权结构的实证分析

从公司收入分配角度研究不同所有权性质公司的企业利益和员工利益,研究发现不同所有权结构的企业生产效率差异不大,私有企业的企业利益优于国有企业,国有相对控股企业和私有相对控股企业的企业利益与员工利益相对较好,混合制企业的生产效率可能较低,企业利益与员工利益也相对较差.没有发现支持国有控股企业有大量冗员的证据,国企改革取得部分成功.     

抗辐射保偏光纤的制备及其特性研究

通过对保偏光纤进行光漂白与低温相结合处理的方式，来提高光纤的抗辐射性能。保偏光纤再经过1.0 kGy的高剂量预辐照处理后，其损耗会明显增大。随后采用980nm的激光对光纤进行光漂白处理,其损耗并没有发生明显变化。但是，处理后的样品在小剂量辐照条件下其光纤传输呈现先减小后增大的趋势。对于通过液氮进行冷处理的预辐照样品，其光纤传输损耗得到明显的降低，同时光纤经过小剂量辐照后的损耗同样也具有先减小后增大的现象。最后，将两种处理方式相结合，一方面可以有效地降低预辐照光纤的传输损耗，另一方面也使得保偏光纤在小剂量辐照的条件下，使其传输损耗具有减小的趋势，大大提高了保偏光纤在小剂量辐照条件下的抗辐照特性。