GEO/IGSO混合区域导航星座的设计与优化算法

区域导航星座能够以较低成本和较短时间获得目标区域导航能力，且地球同步轨道是构建非极区区域导航星座的重要轨道类型。提出一种基于GEO（地球静止轨道）和IGSO（倾斜地球同步轨道）的区域导航星座设计方法。基于星下点轨迹特性构造对称星座设计参数和优化参数集，并考虑地球扁率长期摄动影响，计算星座轨道参数。以导航服务区的统计GDOP（几何精度因子）为目标函数，利用差分进化算法构建星座优化模型。以印度IRNSS的7星星座为例，仿真检验了设计和优化算法的正确性，讨论了IRNSS星座优化构型和轨道类型选取。本方法采用的对称星座设计参数少，能够提升GEO/IGSO混合区域导航星座的全局优化效率，为后续非对称星座快速提供最佳星数和构型设计。     

Evaluation of SARAL/AltiKa performance using GNSS/IMU equipped buoy in Sajafi,Imam Hassan and Kangan Ports

Performance of SARAL/AltiKa mission has been evaluated within 2016 altimeter calibration/validation framework in Persian Gulf through three campaigns conducted in the offshore waters of Sajafi, Imam Hassan and Kangan Ports, while the altimeter overflew the passes 470, 111 and 25 on 13 Feb, 7 March and 17 June 2016, respectively. As the preparation, a lightweight buoy was equipped with a GNSS receiver/choke-ring antenna and a MEMS-based IMU to measure independent datasets in the field operations. To obtain accurate sea surface height (SSH) time series, the offset of the onboard antenna from the equilibrium sea level was predetermined through surveying operations as the buoy was deploying in the onshore waters of Kangan Port. Accordingly, the double-difference carrier phase observations have been processed via the Bernese GPS Software v. 5.0 so as to provide the GNSS-derived time series at the comparison points of the calibration campaigns, once the disturbing effects due to the platform tilt and heave have been eliminated. Owing to comparing of the SSH time series and the associating altimetry 1?Hz GDR-T datasets, the calibration/validation of the SARAL/AltiKa has been performed in the both cases of radiometer and ECMWF wet troposphere corrections so as to identify potential land contamination. An agreement of the present findings in comparison with those attained in other international calibrations sites confirms the promising feasibility of Persian Gulf as a new dedicated site for calibration/validation of ongoing and future altimetry missions.     

NiCrAl/Diatomite可磨耗封严涂层制备及性能

分别利用大气等离子喷涂技术制备了Ni/Al粘结底层、火焰喷涂技术制备了NiCrAl/Diatomite可磨耗封严涂层，研究了喷涂距离、送粉速率、火焰气体总流量、喷涂角度和氧燃比等喷涂参数对生长速率和涂层硬度的影响。结果表明，在较低的氧燃比条件下（O₂∶C₂H₂<1.6），随着喷涂距离的增大，涂层生长速率逐渐下降，硬度先保持不变后逐渐上升；当O₂∶C₂H₂>1.6时，涂层的生长速率会随着喷涂距离的增大先增大后减小，硬度随之逐渐下降。随着喷枪对基体相对移动速度的增大，涂层生长速率略微下降，硬度略有上升。气体总流量的增大使得涂层的生长速率明显上升，硬度明显下降。随着送粉量的增大，涂层生长速率明显提高，硬度随之先上升后下降。     

复合材料构件热压罐成型模具温度均匀性分析

热压罐固化中成型模具的温度分布对复合材料固化质量有显著影响,提高与构件直接接触的模具型面温度均匀性有利于改善内部温度梯度,减小固化变形,提高成型精度。本文以复合材料构件热压罐框架式成型模具为对象,应用有限元方法,分析模具温度的分布,研究模具支撑结构对型板表面温度均匀性的影响。研究表明,支撑板厚度越薄,温度均匀性越好,与进气风口平行方向的支撑板对温度均匀性的影响更为显著,因此可优先考虑增加与进气风口垂直方向支撑板厚度来增加模具刚度。在保持面积不变的前提下,改变散热孔的形状,发现菱形与圆形散热孔具有较强的抗变形能力,而方形散热孔使得型板表面温度分布更加均匀。通过控制散热孔的布局改变风道时,发现T型风道对于改善温度均匀性的效果最佳。     

50吨级氢氧火箭发动机的设计与研制

系统性地回顾了长征五号运载火箭芯一级50t级氢氧火箭发动机YF-77的设计与研制历程。通过分析氢氧发动机的特点以及国内外氢氧发动机的发展现状，阐述了国内新一代运载火箭研发的技术路线和50t级氢氧火箭发动机的研制背景；对50t级氢氧火箭发动机的总体技术方案及其特点进行了分析与总结，并在此基础上对发动机主要组件的技术方案及其特点开展分析；对发动机热试车情况、可靠性验证情况和故障排除情况进行了分析；对50t级氢氧火箭发动机的研制情况、技术特点进行了总结，并对国内氢氧发动机和液氧/甲烷发动机的发展进行了展望。     

基于双环滑模控制的直/气复合控制系统设计

直/气复合控制导弹具有强干扰、强非线性以及强耦合等特点，传统的姿态控制器难以适用于该种复杂干扰并存的情况，文章提出了基于双环滑模控制的直/气复合控制器。首先采用有限时间收敛趋近律分别构造内外环滑模控制器，并将角速度回路的滑模变量量化为直接力指令，以解决空气舵与姿控发动机之间的耦合问题。接着使用非线性扩张状态观测器估计综合干扰，从而设计控制器补偿侧向喷流干扰及模型不确定性等综合干扰的影响。然后基于李雅普诺夫方法证明了控制系统闭环稳定，分析了干扰补偿对控制器收敛域的影响。最后仿真结果表明，该方法跟踪速度快，动态过程平稳，具有较强的干扰抑制能力，具有很强的鲁棒性。     

Effect of moderate geomagnetic storms on equatorial plasma bubbles over eastern Africa in the year 2012: Evolution and electrodynamics

Equatorial plasma bubbles (EPBs) are common features of the equatorial and low-latitude ionosphere and are known to cause radio wave scintillation which leads to the degradation of communication and navigation systems. Although these structures have been studied for decades, a full understanding of their evolution and dynamics remains important for space weather mitigation purposes. In this study, we present cases of EPBs occurrences around April and July 2012 geomagnetic storm periods over the African equatorial sector. The EPBs were observed from the Communications/Navigation Outage Forecasting System (C/NOFS) and generally correlated well to the ionospheric irregularities observed from the Global Positioning System total electron content (GPS-TEC) measurements (rate of TEC change, ROT). This study revealed that the evolution of the EPBs during moderate storms is controlled by the strength of the daytime equatorial electrojet (EEJ) currents regardless of the strength of the equatorial ionization anomaly (EIA), the latter is observed during the July storm case in particular. These effects were more evident during the main and part of the early recovery phases of the geomagnetic storm days considered. However, the evening hours TEC gradients between regions of the magnetic equator and ionization crests also played roles in the existence of ionospheric irregularities.     

Ionospheric total electron content response to annular solar eclipse on June 21, 2020

The effects of physical events on the ionosphere structure is an important field of study, especially for navigation and radio communication. The paper presents the spatio-temporal ionospheric TEC response to the recent annular solar eclipse on June 21, 2020, which spans across two continents, Africa and Asia, and 14 countries. This eclipse took place on the same day as the June Solstice. The Global Navigation Satellite System (GNSS) based TEC data of the Global Ionosphere Maps (GIMs), 9 International GNSS Service (IGS) stations and FORMOSAT-7/COSMIC-2 (F7/C2) were utilized to analyze TEC response during the eclipse. The phases of the TEC time series were determined by taking the difference of the observed TEC values on eclipse day from the previous 5-day median TEC values. The results showed clear depletions in the TEC time series on June 21. These decreases were between 1 and 9 TECU (15–60%) depending on the location of IGS stations. The depletions are relatively higher at the stations close to the path of annular eclipse than those farther away. Furthermore, a reduction of about ?10 TECU in the form of an equatorial plasma bubble (EPB) was observed in GIMs at ~20° away from the equator towards northpole, between 08:00–11:00 UT where its maximum phase is located in southeast Japan. Additionally, an overall depletion of ~10% was observed in F7/C2 derived TEC at an altitude of 240 km (hmF2) in all regions affected by the solar eclipse, whereas, significant TEC fluctuations between the altitudes of 100 km ? 140 km were analyzed using the Savitzky-Golay smoothing filter. To prove TEC depletions are not caused by space weather, the variation of the sunspot number (SSN), solar wind (V_SW), disturbance storm-time (Dst), and Kp indices were investigated from 16th to 22nd June. The quiet space weather before and during the solar eclipse proved that the observed depletions in the TEC time series and profiles were caused by the annular solar eclipse.     

SiC/CVD SiC复合涂层的抗氧化及抗热震性能研究

为了提高C/SiC复合材料耐高温性能,采用泥浆浸渍裂解与真空化学气相沉积(CVD)在材料表面制备了SiC/CVD SiC复合涂层,通过XRD、SEM分析了涂层组成与结构;研究了复合涂层的高温抗氧化(700～1 500℃)和抗热震性能。结果表明,泥浆浸渍法制备的SiC涂层具有一定的封孔效果,可使材料开孔率下降,但高温抗氧化效果并不佳,1 200℃氧化10 min后材料弯曲强度保留率下降明显仅有86%。CVD SiC涂层结构致密,与SiC封孔涂层结合较好,在700～1 500℃具有较好的抗氧化效果,随着氧化温度的升高,氧化后涂层完好,表面O元素逐渐增加,材料失重率缓慢增加但不大于0.5%,且材料性能并未下降。涂层材料在1 200℃-10 min短时热震5次后材料弯曲强度保留率仍有95%以上,且未出现开裂、剥落等热震损伤。在1 200℃-30 min长时热震10次后,涂层材料基本被完全氧化,材料失去保护作用,弯曲强度下降至90%左右。     

多梁复合结构的动力学建模及全局解析振型分析

多梁复合结构广泛用于工程领域，其动力学特性对相关装备的工作状况有着重要影响，建立准确适用的动力学模型对后续的动力学响应参数影响规律研究有决定性作用。针对工程中常见的多梁复合结构，给出了位移场的一般表达式，利用哈密顿原理得出多梁复合结构的运动控制方程和边界条件，对其全局解析振型进行理论计算，给出了计算多梁复合结构数值振型的一般过程，基于数值分析和实验分析以L型梁和Z型梁为例利用频率相对误差、振型定性比较和MAC定量分析说明了全局解析振型的求解验证方法，利用伽辽金方法和全局解析振型给出了截断原系统得到离散系统运动方程的一般形式。提出的多梁复合结构的建模方法和全局解析振型求解验证方法，对工程中此类结构动力学响应的参数影响规律研究有重要意义。