Study of the rheological properties of water and Martian soil simulant mixtures for engineering applications on the red planet

The rheological properties of mixtures of water and the Martian soil simulant JSC-Mars-1A are investigated by preparing and testing samples at various solids concentrations. The results indicate that the dispersion is viscoelastic and, at small timescales (～0.1?s), reacts to sudden strain as an elastic solid. At longer timescales the dispersion behaves like a Bingham fluid and exhibits a yield stress. Hysteresis loops show that rapid step-changes (2?s duration) of shear-rate result in thixotropic behaviour, but slower changes (>10?s duration) can result in rheopexy. These observations are explained with the breakdown and recovery of the packing structure under stress. The rheological information is used to generate practical tools, such as the system curve and the Moody chart that can be used for designing piping systems, and calculating pump sizes and pressure requirements.     

A drilling tool design and in situ identification of planetary regolith mechanical parameters

The physical and mechanical properties as well as the heat flux of regolith are critical evidence in the study of planetary origin and evolution. Moreover, the mechanical properties of planetary regolith have great value for guiding future human planetary activities. For planetary subsurface exploration, an inchworm boring robot (IBR) has been proposed to penetrate the regolith, and the mechanical properties of the regolith are expected to be simultaneously investigated during the penetration process using the drilling tool on the IBR. This paper provides a preliminary study of an in situ method for measuring planetary regolith mechanical parameters using a drilling tool on a test bed. A conical-screw drilling tool was designed, and its drilling load characteristics were experimentally analyzed. Based on the drilling tool-regolith interaction model, two identification methods for determining the planetary regolith bearing and shearing parameters are proposed. The bearing and shearing parameters of lunar regolith simulant were successfully determined according to the pressure-sinkage tests and shear tests conducted on the test bed. The effects of the operating parameters on the identification results were also analyzed. The results indicate a feasible scheme for future planetary subsurface exploration.     

DME询问信号捕获的设计与实现

捕获询问信号是DME地面设备的一个重要功能组成部分。现役的地面设备中大多使用的捕获单元为分离器件电路设计，其电路复杂，控制难度大，改进与维护成本高。针对这些问题，本文设计采用ADC结合FPGA作为主要功能器件，并通过软件算法完成数字滤波、脉冲峰值提取和半幅点计算，实现询问信号的识别与捕获。不仅大幅减少元器件的使用，缩小设备体积，还可提高扩展性与可靠性。结合机柜验证测试，结果符合设计要求。     

基于任务的微机电惯性系统规模化测试技术研究

针对传统惯性测试技术测试周期长、测试效率低、测试成本高等问题，提出了基于任务的微机电惯性系统规模化测试解决方案。研究分析了微机电惯性系统测试技术的研究现状和发展趋势，建立了基于任务的微机电惯性系统测试体系，详细论证了微机电惯性系统批量、并行、自动化测试解决方案的可行性，为微机电惯性系统规模化测试实践奠定了基础。     

基于LPV模型的航空发动机控制器Kalman滤波器设计

针对航空发动机LPV模型,设计了1种改进Kalman滤波器设计方法,并应用于某型涡扇发动机控制系统中。涡扇发动机宽工况变化过程的仿真结果表明,该滤波器可实现对系统输出和状态的有效跟踪和滤波,较好地检验了该方法的有效性。     

高精度秒脉冲信号的产生

通过介绍高精度秒脉冲信号的实现原理以及实现中的关键技术,分析了如何减小由码跟踪环路测量误差导致的秒脉冲信号随机抖动误差,提出了减小由直接数字频率合成器导致的秒脉冲信号系统钟模糊误差的实现方法。最后给出了在＂北斗＂一号卫星标校机工程应用中的实际性能,统计精度（1倍标准差）为1.7ns,保证了标校设备能高精度地服务于BD-1导航定位系统。     

航空专用测试设备校准问题的研究

简要介绍了航空专用测试设备的概念,在计量、校准中遇到的问题以及解决问题的途径。     

相对差分单向测距（△DOR）技术在探月工程中的应用研究

相对差分单向测距（△DOR）是一种高精度测角技术,在深空探测任务的高精度测定轨方案中得到广泛应用．介绍了△DOR测量的基本原理及CCSDS（国际空间数据系统委员会）关于△测量的相关标准．针对中国探月工程月面软着陆任务提出的高精度测定轨要求,分析了△DOR测量的信号形式、工作模式以及测量精度,推导了解模糊过程．研究表明,△DOR测角精度达到25nrad,对应到月球上的距离约为10m．     

合成仪器体系架构与关键技术研究

合成仪器技术作为下一代自动测试系统中的一项关键技术,在装备综合保障中占据重要地位。介绍了合成仪器的基本概念、体系架构及特点,详细论述分析了合成仪器中涉及的包括信号调理、ADC/DAC、数据处理器与总线、系统软件等关键技术及实现,并展望了合成仪器的发展前景。     

平面工艺功率型半导体晶体管铝迁移实验

在平面工艺制造的功率型半导体晶体管芯片表面,发现高强度电场条件下存在跨越0.05 mm半绝缘硅带的铝迁移现象,对此开展了一系列实验研究. 通过开帽物理观察与分析、低温测试与烘干验证、迁移物质分析对比,确定了迁移现象中的迁移物质,同时分别取证环境温度、湿度、芯片表面污染物以及器件局部结构与此迁移现象的关联性,以此提出了迁移机理假说,为在不同的诱发条件下对此迁移机理进行确认和量化研究提供指导.