基于光学测角数据的风云四号同步轨道卫星精密定轨

针对风云四号同步卫星的精密定轨和精度评估需求，首先利用地面光学测角数据对FY-4A卫星进行精密定轨，定轨后方位角和高度角的残差rms分别为0.25＂和0.45＂。与基于测距数据的轨道相比，位置精度在有测角数据的弧段内小于50m。进一步联合测角数据和测距数据对FY-4A卫星进行联合定轨，定轨后轨道重叠精度优于15m。利用联合定轨结果评估了基于测距数据的实时轨道产品精度，可以明显发现轨道精度随着测距数据的积累而逐步提高。     

An empirical solar radiation pressure model for satellites moving in the orbit-normal mode

We present a family of empirical solar radiation pressure (SRP) models suited for satellites orbiting the Earth in the orbit normal (ON) mode. The proposed ECOM-TB model describes the SRP accelerations in the so-called terminator coordinate system. The choice of the coordinate system and the SRP parametrization is based on theoretical assumptions and on simulation results with a QZS-1-like box-wing model, where the SRP accelerations acting on the solar panels and on the box are assessed separately. The new SRP model takes into account that in ON-mode the incident angle of the solar radiation on the solar panels is not constant like in the yaw-steering (YS) attitude mode. It depends on the elevation angle of the Sun above the satellite’s orbital plane. The resulting SRP vector acts, therefore, not only in the Sun-satellite direction, but has also a component normal to it. Both components are changing as a function of the incident angle. ECOM-TB has been used for precise orbit determination (POD) for QZS-1 and BeiDou2 (BDS2) satellites in medium (MEO) and inclined geosynchronous Earth orbits (IGSO) based on IGS MGEX data from 2014 and 2015. The resulting orbits have been validated with SLR, long-arc orbit fits, orbit misclosures, and by the satellite clock corrections based on the orbits. The validation results confirm that—compared to ECOM2—ECOM-TB significantly (factor 3–4) improves the POD of QZS-1 in ON-mode for orbits with different arc lengths (one, three, and five days). Moderate orbit improvements are achieved for BDS2 MEO satellites—especially if ECOM-TB is supported by pseudo-stochastic pulses (the model is then called ECOM-TBP). For BDS2 IGSOs, ECOM-TB with its 9 SRP parameters appears to be over-parameterized. For use with BDS2 IGSO spacecraft we therefore developed a minimized model version called ECOM-TBMP, which is based on the same axis decomposition as ECOM-TB, but has only 2 SRP parameters and is supported by pseudo-stochastic parameters, as well. This model shows a similar performance as ECOM-TB with short arcs, but an improved performance with (3-day) long-arcs. The new SRP models have been activated in CODE’s IGS MGEX solution in Summer 2018. Like the other ECOM models the ECOM-TB derivatives might be used together with an a priori model.     

火星探测VLBI测定轨技术

我国将于2020年首次发射由环绕器和着陆巡视器组成的火星探测器,火星探测器的跟踪及精密测定轨是完成工程任务和科学探测的基础。火星探测器的跟踪和测定轨,目前主要采用基于地面无线电测量的测距、测速和甚长基线干涉VLBI测角3种手段。主要针对VLBI技术予以介绍,主要内容为:△DOR型VLBI技术在国内外的应用情况、火星探测器VLBI测定轨技术分析、基于同波束VLBI的火星车定位技术、火星探测器VLBI观测等。这些内容对我国的火星探测器测定轨有重要的应用价值。     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

“龙江2号”月球轨道微卫星定轨分析

微纳卫星深空探测任务中,通常所分配的测控资源有限,因此有必要对有限测控资源条件下微纳卫星的定轨精度进行分析。以微纳卫星深空探测为背景,采用"龙江2号"微卫星的轨道测量数据对其定轨精度进行了分析。"龙江2号"微卫星只有USB轨道测量数据,且环月段测控资源相对紧张,每天有两站跟踪,共约3～4 h的轨道测量数据。首先介绍了"龙江2号"微卫星飞行任务及其飞行过程中影响测定轨的因素;其次给出了定轨的动力学模型,对微卫星地月转移段的定轨精度进行了分析;最后通过分析摄动力、动量轮卸载以及数据弧段长度的影响,给出了微卫星环月阶段所使用的定轨策略,并通过重叠弧段比较的模式,给出了微卫星环月段的定轨精度。研究结论可以为后续微纳卫星深空探测任务提供有益参考。     

Orbit determination and prediction of GEO satellite of BeiDou during repositioning maneuver

In order to establish a continuous GEO satellite orbit during repositioning maneuvers, a suitable maneuver force model has been established associated with an optimal orbit determination method and strategy. A continuous increasing acceleration is established by constructing a constant force that is equivalent to the pulse force, with the mass of the satellite decreasing throughout maneuver. This acceleration can be added to other accelerations, such as solar radiation, to obtain the continuous acceleration of the satellite. The orbit determination method and strategy are illuminated, with subsequent assessment of the orbit being determined and predicted accordingly. The orbit of the GEO satellite during repositioning maneuver can be determined and predicted by using C-Band pseudo-range observations of the BeiDou GEO satellite with COSPAR ID 2010-001A in 2011 and 2012. The results indicate that observations before maneuver do affect orbit determination and prediction, and should therefore be selected appropriately. A more precise orbit and prediction can be obtained compared to common short arc methods when observations starting 1 day prior the maneuver and 2 h after the maneuver are adopted in POD (Precise Orbit Determination). The achieved URE (User Range Error) under non-consideration of satellite clock errors is better than 2 m within the first 2 h after maneuver, and less than 3 m for further 2 h of orbit prediction.     

基于连续同伦算法的天基仅测角初定轨方法

要进一步提高天基短弧初定轨的精度,在观测资料精度较高的情况下,仅考虑二体问题是不够的,还应考虑轨道摄动的影响。因此,基于无摄初轨的单位矢量法原理和矢量斜分解方法,给出了考虑摄动的天基仅测角初定轨单位矢量法。针对天基仅测角观测条件方程组求解过程中易出现迭代不收敛或收敛到平凡解的问题,引入连续同伦算法求解观测条件方程组,提出了单星观测方式下的空间目标天基仅测角初定轨方法,并通过数值仿真算例验证了该算法在较大范围的收敛性和数值稳定性。     

基于粒子群算法的极短弧定轨

针对经典的初轨计算方法在极短弧定轨中不适用的情况,建立了一种基于粒子群算法的极短弧(TooShort-Arc,TSA)定轨的计算方法。该方法将问题转化为两个三变量的分层优化问题,采用(a,e,M)作为优选变量,在保持问题维数较低的同时,实现了计算结果和观测资料的解耦。由于实测资料处理中的野值剔除方法不适用于粒子群算法,所以,采用稳健估计法,通过在适值函数中使用最小中值二乘准则,实现了稳健的极短弧计算方法。同时,应用MATLAB计算软件,选用缺省参数实现该算法,以进行数据验证。基于实测数据的数值验证表明,方法对于近圆轨道目标30s以下的弧段仍可以获得有效的结果,10s弧段误差仅为16km。此精度满足后续处理的需要,且方法稳健,具有很高的崩溃点。     

锚固站数量及布局对导航星座自主定轨影响分析

针对导航星座自主定轨中的星座整体旋转问题,采用增设少量地面锚固站的方法可有效解决该问题。通过推导星地距离对卫星轨道升交点赤经的偏导数,证明了星地距离对卫星轨道升交点赤经可观。仅考虑在我国大陆范围内布设锚固站的条件下,仿真分析了锚固站数量以及布局对导航星座自主定轨精度的影响。仿真实验结果表明:采用3个以上的锚固站,即可有效控制星座整体旋转,在14d的仿真时段内卫星自主定轨精度保持4m以内;锚固站数量越多,自主定轨精度越高,但随着锚固站数量的增加,自主定轨精度改善程度越来越小;在保持4个锚固站的情形下,采用不同的锚固站布局方案,自主定轨精度并无明显差别。     

一种复合的SAR压制干扰方法研究

覆盖式干扰是一种对合成孔径雷达有效的干扰样式,有效覆盖面积是评价覆盖干扰效果的重要指标之一,如何有效地对干扰范围进行扩展是研究的热点问题,具有较高的研究价值。在介绍3种不同干扰方法的原理与干扰效果之后,对方法进行了结合,提出了1种可以有效扩展干扰区域范围的干扰模型。方法以二维锯齿调频干扰为基础,利用频移干扰扩展距离向干扰区域,利用方位向间歇采样技术扩展方位向干扰区域。不仅原理简单,更加利于工程实现。最后,利用单一点目标对方法进行了验证,仿真实验的结果证实了方法的准确性与可靠性。