柔性支撑控制力矩陀螺动力学建模与控制

针对柔性支撑引起控制力矩陀螺(CMG)框架控制性能下降的问题，建立了柔性支撑条件下控制力矩陀螺的动力学模型，分析了柔性支撑扰动力矩的耦合机理并给出了解析模型.据此，设计了一种积分滑模控制策略，用于提升对CMG框架动力学特性变化和新增扰动力矩的鲁棒性.仿真结果表明，该控制策略相比传统的PID控制具有更好的动态过程和稳态性能，提升了柔性支撑下控制力矩陀螺框架速度的闭环控制性能.     

PMSM电流预测控制参数误差量化分析方法

交流永磁同步电机（PMSM）电流环控制性能是制约交流伺服系统性能的关键。电流预测控制拥有更快的动态响应、更低的电流谐波和优良的转矩响应，但该算法依赖精确的电机模型，参数失配会引发稳态电流误差，无法输出额定转矩，进而导致电机转矩输出效率降低。根据永磁同步电机电流预测模型，详细分析了d、q轴电流静差产生的原因，以及电流预测控制对电机参数误差的敏感性，提出了一种参数误差量化分析方法。该方法引入了电机参数偏差因子，量化描述了电机电感、磁链参数误差与电流静差之间的制约关系。通过仿真分析，验证了所提方法的合理性，为高性能永磁伺服电流预测数字控制技术打下了良好基础。     

Spacecraft formation flying control around L2 sun-earth libration point using on–off SDRE approach

In this paper, on–off SDRE control approach is presented for spacecraft formation flying control around sun-earth L2 libration point. Orbits around libration points are significant targets for many space missions mainly because of efficient fuel consumption. Furthermore, less propellant usage can be achieved by considering optimal control approaches in spacecraft formation flying control design. Among various nonlinear and optimal control methods, SDRE has shown to be a popular controller in various missions due to the privileges including efficiency, accuracy and robustness. The spacecraft are assumed to have on–off thrusters as actuators. It requires them to be fed with a sequence of on–off pulses which is regarded as a challenge for spacecraft designers. Hence, the main contribution of this paper is designing an on–off SDRE approach for the formation flight around sun-earth L2 point with uncertainty with energy and accuracy considerations. Including on–off input as a constraint is not feasible for SDRE implementation because it makes the system non-affine. An alternative is utilizing an integral action technique and an auxiliary control to make the system affine which leads to on–off SDRE approach. It has also been shown that the proposed method is robust against parametric uncertainties of the states. Present study aims to design an energy-beneficial, simple and attractive controller for a complex nonlinear system with on–off inputs and uncertainty in CRTBP. Simulation results show that the on–off SDRE control could provide the formation flight around L2 point with high accuracy using less energy consumption.     

Propulsionless planar phasing of multiple satellites using deep reinforcement learning

This work creates a framework for solving highly non-linear satellite formation control problems by using model-free policy optimisation deep reinforcement learning (DRL) methods. This work considers, believed to be for the first time, DRL methods, such as advantage actor-critic method (A2C) and proximal policy optimisation (PPO), to solve the example satellite formation problem of propellantless planar phasing of multiple satellites. Three degree-of-freedom simulations, including a novel surrogate propagation model, are used to train the deep reinforcement learning agents. During training, the agents actuated their motion through cross-sectional area changes which altered the environmental accelerations acting on them. The DRL framework designed in this work successfully coordinated three spacecraft to achieve a propellantless planar phasing manoeuvre. This work has created a DRL framework that can be used to solve complex satellite formation flying problems, such as planar phasing of multiple satellites and in doing so provides key insights into achieving optimal and robust formation control using reinforcement learning.     

弹载变转速定量泵高动态压力控制特性分析

传统弹载电液伺服系统的液压能源采用有刷直流电机驱动恒压变量泵的方式，泵源压力在导弹飞行过程中设定值恒定，但在平飞段过程长、负载小，对能源压力需求低，造成弹上能源总利用率不高的问题，提出无刷直流电机驱动小排量液压泵的压力控制泵源的设计，在低气动负载阶段适当降低系统压力，进而降低节流损失与泄漏量，提高能量利用率。分析了变转速定量泵的流量压力特性曲线，通过建立基于变转速压力控制泵源的位置电液伺服系统数学模型与仿真模型，分析了变转速定量泵压力控制系统在典型工况下的位置跟踪、系统压力变化与能量利用效率，验证了压力控制系统能够在导弹平飞段保证位置伺服系统跟踪正常的前提下，能有效提高系统效率，证明了变转速定量泵压力控制系统的有效性与可行性。     

高背压等离子点火器及其液体燃料点火特性实验研究

航天应用的液体火箭发动机及燃烧型加热器燃烧室室压高、燃料流量大、温度低、有重复启动需求，实现安全可靠点火的难度较大。针对这些需求，研究了一种采用高背压设计的电弧等离子体点火器。实验研究了Ar，N₂气体工质在高进气压力下的伏安特性，发现N₂在宽压力范围内适用于点火。发射光谱分析表明，在高达数MPa的进气压力下，Ar，N₂等离子体射流电子密度符合局部热力学平衡判据（LTE判据），点火能量集中。N₂等离子体整体温度低于Ar，但阳极喷口附近温度高于Ar，N₂等离子体射流火焰长，卷吸沿程空气造成射流平均温度偏低，但有助于低温液体推进剂的蒸发混合和强化点火。等离子体射流引起了臭氧和氮氧化物的形成，具有促进点火和化学反应的作用。背压提高引起电源输出电压升高，提高供气压力和电流，有助于点火器在高背压环境中稳定电压。燃烧型空气加热器燃烧室的点火实验发现，采用N₂等离子体喷注面中心点火，可以在短时间内完成酒精-空气和酒精-液氧-空气的点火，最高燃烧室室压接近5MPa时，点火器仍能稳定工作，多次使用电极烧蚀不明显，在液体火箭发动机的重复可靠点火方面具有很好的应用前景。     

Solar sailing in realistic mode,based on a locally-optimal control laws

Ballistic design of solar sailing missions in the solar system is composed of defining the design parameters, the control programs, and the trajectories that provide performance goals of a flight. The use of a solar sail spacecraft imposes specific restrictions on mission parameters that include the degradation limit on the flight duration, the maximum temperature of solar sail's surface, the minimum distance from the Sun, the maximum angular velocity of the spacecraft's rotation and others.Many authors considered the impact of these restrictions on the design of the mission separately, but they used a sophisticated method of finding the exact optimal motion control or applied the most straightforward laws of motion control. This paper uses local-optimal control laws at the complete mathematical models of motion and functioning of solar sail spacecraft to describe a technique of designing interplanetary missions. The described method avoids the need to obtain an accurate optimal solution to the control problem and does not cause significant computational difficulties.     

详细化学反应机理对预混丙烷钝体熄火模拟影响

航空发动机熄火预测是重要关键问题之一，湍流和化学反应的非线性相互作用使预测非常困难。本文采用大涡模拟（LES）对湍流进行高精度模拟，采用概率密度函数输运方程湍流燃烧模型（TPDF）耦合JL4、Z66和H73三种化学反应机理，对预混丙烷钝体熄火现象和规律进行研究。JL4的反应机理最简单，反应释热快，局部放热高，火焰宽度大，火焰两侧温度梯度大，燃烧更加趋于稳定，无法模拟出熄火状态。H73机理绝热火焰温度低，火焰温度低，回流区中部OH含量高；在近熄火状态，大量CO被氧化，释放热量过高导致无法模拟出熄火现象。Z66机理可以模拟出火焰正常状态，在低当量比下也可以模拟出熄火状态。本文算例中，局部Da数大于1的区域超过35%则会发生熄火。     

SABRE预冷器计算模型及其在整机模型中的应用

预冷器的性能对SABRE等预冷组合循环发动机具有重要影响,为实现发动机方案设计阶段预冷器的快速设计与评估,建立了预冷器准二维快速评估模型。将SABRE预冷器的几何结构简化为一个扇环形区域,沿径向和周向将该区域划分为二维节点。应用守恒方程及传热关联式完成单个节点计算,再求解节点矩阵的平衡方程组,计算内外流体特定节点上参数的二维分布,得到预冷器出口参数。将模型嵌入发动机总体性能程序中,实现了发动机设计及非设计点的预冷器性能计算的功能。与文献数据对比结果表明,预冷器模型传热计算误差小于5%,摩擦阻力误差小于10%。整机计算结果显示,Ma0~5范围内,预冷器空气侧温降范围为143K至932K,温降随飞行马赫数升高单调上升。预冷器传热有效度范围为0.896-0.945,空气侧总压恢复系数范围为0.852-0.904。     

宇航矢量伺服控制器在SiP中的设计与实现

磁场导向控制FOC（field-oriented control）矢量控制算法在伺服驱动控制系统中一般由CPU或DSP实现，难以满足航天应用中实时性较高场景下的需求。为提高宇航电机系统控制的实时性与可靠性，从FOC矢量控制算法的硬件加速角度出发，详细介绍了伺服控制器的设计，给出了一种全数字、高性能的伺服控制器硬件加速设计方案，并在具有可编程逻辑功能的宇航级SiP6117S芯片上进行了验证。仿真实验表明，相比于前人的设计，通过调整观测数据的量化精度来降低硬件加速过程中的处理延时，能有效改善多级流水延迟并在一定程度上提升算法的实时性。