作动器输出机构刚度优化设计与仿真分析

作动器输出机构的变形可以看作是输出轴体扭转变形与摇臂变截面悬臂梁变形的综合。从材料力学的角度出发,详细推导了作动器输出机构机械刚度的理论计算方法,并以此理论为依据对作动器输出机构的结构进行优化设计。通过仿真对比确定优化设计的正确性,为工程应用提供了有力的理论支撑。     

Numerical study on flow fields and aerodynamics of tilt rotor aircraft in conversion mode based on embedded grid and actuator model

A method combining rotor actuator disk model and embedded grid technique is presented in this paper, aimed at predicting the flow fields and aerodynamic characteristics of tilt rotor aircraft in conversion mode more efficiently and effectively. In this method, rotor's influence is considered in terms of the momentum it impacts to the fluid around it; transformation matrixes among different coordinate systems are deduced to extend actuator method's utility to conversion mode flow fields' calculation. Meanwhile, an embedded grid system is designed, in which grids generated around fuselage and actuator disk are regarded as background grid and minor grid respectively, and a new method is presented for ‘donor searching' and ‘hole cutting' during grid assembling. Based on the above methods, flow fields of tilt rotor aircraft in conversion mode are simulated, with threedimensional Navier–Stokes equations discretized by a second-order upwind finite-volume scheme and an implicit lower–upper symmetric Gauss–Seidel(LU-SGS) time-stepping scheme. Numerical results demonstrate that the proposed CFD method is very effective in simulating the conversion mode flow fields of tilt rotor aircraft.     

基于能耗与可靠性约束的动量轮可重构性评价

针对目前在控制系统的可重构性评价中较少考虑系统能耗、可靠性限制的问题，文章研究了约束条件下卫星姿态控制系统可重构性度量及评价方法，建立了含执行机构失效因子的控制系统模型，并基于可控性格兰姆矩阵得到能耗约束下可重构性度量指标；然后将可靠性指标引入到系统可重构性评价度量中，进一步缩小可重构性集合；最终形成综合两种约束的可重构性评价方法。通过对含动量轮系统的重构构型仿真，得到约束前后的可重构性对比，仿真结果符合实际分析，验证了该方法的有效性。     

自动转移飞行器的轨控总体方案

介绍了欧空局的自动转移飞行器（ATV）的轨道控制方案和技术。给出了ATV的飞行方案、测量敏感器和执行机构的配置，以及在空间站调相段、寻的段、接近段和最终逼近段的轨控策略。     

Review on signal-by-wire and power-by-wire actuation for more electric aircraft

The huge and rapid progress in electric drives offers new opportunities to improve the performances of aircraft at all levels:fuel burn,environmental footprint,safety,integration and production,serviceability,and maintainability.Actuation for safety-critical applications like flight-controls,landing gears,and even engines is one of the major consumers of non-propulsive power.Conventional actuation with centralized hydraulic power generation and distribution and control of power by throttling has been well established for decades,but offers a limited potential of evolution.In this context,electric drives become more and more attractive to remove the natural drawbacks of conventional actuation and to offer new opportunities for improving performance.This paper takes the stock,at both the signal and power levels,of the evolution of actuation for safety-critical applications in aerospace.It focuses on the recent advances and the remaining chal lenges to be taken toward full electrical actuation for commercial and military aircraft,helicopters,and launchers.It logically starts by emphasizing the specificity of safety-critical actuation for aero space.The following section addresses in details the evolution of aerospace actuation from mechanically-signaled and hydraulically-supplied to all electric,with special emphasis on research and development programs and on solutions entered into service.Finally,the last section reviews the challenges to be taken to generalize the use of all-electric actuators for future aircraft programs.     

执行器故障下的运载火箭非奇异终端滑模容错控制

针对存在未知外部干扰和执行器卡死故障的运载火箭，提出了一种基于非奇异终端滑模面的姿态跟踪控制算法。首先，建立了考虑干扰和执行器卡死故障的运载火箭姿态控制系统多输入多输出系统模型；然后定义了运载火箭姿态跟踪系统模型，针对定义的模型，设计了一种非奇异终端滑模面，使得系统在执行器故障情况下仍能较为精确地跟踪参考信号。基于李雅普诺夫函数证明了运载火箭姿态跟踪控制系统的稳定性和有限时间收敛特性。数值仿真检验了本文基于非奇异终端滑模运载火箭姿态跟踪控制算法的有效性。     

电磁式舵机的驱动设计试验与仿真

针对一种电磁式舵机,基于虚拟仪器技术设计了相应的测试系统,对舵机的动态性能进行了测试分析。考虑到铁磁阻的非线性和漏磁通的分散性,本文采用磁路微分法建立了舵机电磁铁的数学模型,对其动态特性进行仿真分析。结果表明:舵机的性能满足系统设计要求。试验结果与仿真结果基本一致,仿真计算可以用于舵机性能的优化与分析。     

自耦合射流对平行主射流的矢量偏转实验研究

为研究自耦合射流与主射流空间布局对主流矢量偏转的影响,采用了二者平行布局的方式,利用压电陶瓷单缝自耦合射流作动器出口两侧的低压区的卷吸作用,使主射流发生了显著的矢量偏转。实验表明,主射流的偏转角与自耦合射流和主射流之间的间距d,高差s等参数有关。在实验条件下,自耦合射流使约5·4m/s流速的主射流产生了最大45°的矢量偏转。     

Robust fault-tolerant control for wing flutter under actuator failure

Many control laws, such as optimal controller and classical controller, have seen their applications to suppressing the aeroelastic vibrations of the aeroelastic system. However, those control laws may not work effectively if the aeroelastic system involves actuator faults. In the current study for wing flutter of reentry vehicle, the effect of actuator faults on wing flutter system is rarely considered and few of the fault-tolerant control problems are taken into account. In this paper, we use the radial basis function neural network and the finite-time H_∞ adaptive fault-tolerant control technique to deal with the flutter problem of wings, which is affected by actuator faults, actuator saturation, parameter uncertainties and external disturbances. The theory of this article includes the modeling of wing flutter and fault-tolerant controller design. The stability of the finite-time adaptive fault-tolerant controller is theoretically proved. Simulation results indicate that the designed fault-tolerant flutter controller can effectively deal with the faults in the flutter system and can promptly suppress the wing flutter as well.