50吨级氢氧火箭发动机的设计与研制

系统性地回顾了长征五号运载火箭芯一级50t级氢氧火箭发动机YF-77的设计与研制历程。通过分析氢氧发动机的特点以及国内外氢氧发动机的发展现状，阐述了国内新一代运载火箭研发的技术路线和50t级氢氧火箭发动机的研制背景；对50t级氢氧火箭发动机的总体技术方案及其特点进行了分析与总结，并在此基础上对发动机主要组件的技术方案及其特点开展分析；对发动机热试车情况、可靠性验证情况和故障排除情况进行了分析；对50t级氢氧火箭发动机的研制情况、技术特点进行了总结，并对国内氢氧发动机和液氧/甲烷发动机的发展进行了展望。     

Statistical characteristics of low latitude Pc4s: Influence of solar wind and IMF parameters

Pc4 signatures for the year 2013, extracted from geomagnetic north–south and east–west components of induction coil magnetometer (LEMI 30) from low latitude station Desalpar (DSP), operated by Institute of Seismological Research (ISR), India have been investigated vis-à-vis the prevalent interplanetary parameters (IMF) as well as the geomagnetic activity indices. A clear dominance of Pc4-5 (467 events) over Pc3 (17 events) is observed. Local time variation of Pc4 shows a peak in the noon sector in both X and Y components. Our investigations show that the dominant peak frequency is 10 mHz at low latitude region. Correlations with solar wind and IMF parameters illustrate highest occurrence of Pc4 for a solar wind speed of 300–400 km/s and average IMF B field of 3–6 nT. The amplitude of Pc4s at DSP shows an increase with increasing solar wind speed, plasma density, solar wind dynamic pressure and average B field which is also reflected in the trend of frequency variation of these pulsations. We report that IMF clock angle at low latitude does not have influence on Pc4 occurrence. Based on the characteristics of these events, detected in latitudinally distributed stations from low and mid-latitudes from northern and southern hemisphere, we infer that modes were compressional, which could be driven by K-H instability or solar wind dynamic pressure, as compressional modes can propagate to low latitude with little attenuation.     

共熔法制备超高温陶瓷基复合材料

首次采用共熔法制备超高温陶瓷基复合材料,三个样品初始组分分别为ZrB_2与鳞片石墨,ZrB_2、TaB_2、SiC及鳞片石墨,ZrB_2、MoSi_2与鳞片石墨。研究结果表明,共熔法制备的复合材料中各相分散均匀,产物中的石墨高度有序,石墨层间距分别为0.335 4、0.335 9与0.337 7 nm,且三者的微晶厚度分别为63.4、51.5及68.7 nm,拉曼光谱结果表明硼已经掺杂进入了石墨的网格结构。所制得的超高温陶瓷基复合材料样品中均存在一定的孔隙率,且制备的超高温陶瓷基复合材料的热导率较低。该方法为一种新型、快速、一步法制备超高温陶瓷基复合材料工艺。     

Alternative transfer to the Earth–Moon Lagrangian points L4 and L5 using lunar gravity assist

Lagrangian points L4 and L5 lie at 60° ahead of and behind the Moon in its orbit with respect to the Earth. Each one of them is a third point of an equilateral triangle with the base of the line defined by those two bodies. These Lagrangian points are stable for the Earth–Moon mass ratio. As so, these Lagrangian points represent remarkable positions to host astronomical observatories or space stations. However, this same distance characteristic may be a challenge for periodic servicing mission. This paper studies elliptic trajectories from an Earth circular parking orbit to reach the Moon’s sphere of influence and apply a swing-by maneuver in order to re-direct the path of a spacecraft to a vicinity of the Lagrangian points L4 and L5. Once the geocentric transfer orbit and the initial impulsive thrust have been determined, the goal is to establish the angle at which the geocentric trajectory crosses the lunar sphere of influence in such a way that when the spacecraft leaves the Moon’s gravitational field, its trajectory and velocity with respect to the Earth change in order to the spacecraft arrives at L4 and L5. In this work, the planar Circular Restricted Three Body Problem approximation is used and in order to avoid solving a two boundary problem, the patched-conic approximation is considered.     

Study on O2 generation and CO2 absorption capability of four co-cultured salad plants in an enclosed system

The ability to generate O₂ and absorb CO₂ of several co-cultured vegetable plants in an enclosed system was studied to provide theoretical reference for the future man-plant integrated tests. Four kinds of salad plants (Lactuca sativa L. var. Dasusheng, Lactuca sativa L. var. Youmaicai, Gynura bicolor and Cichorium endivia L.) were grown in the CELSS Integration Test Platform (CITP). The environmental factors including O₂ and CO₂ concentration were continuously monitored on-line and the plant biomass was measured at the end of the test. The changing rules of O₂ and CO₂ concentration in the system were basically understood and it was found that the O₂ generated by the plants could satisfy the respiratory needs of 1.75 persons by calculation. It was also found that the plants could absorb the CO₂ breathed out by 2 persons when the light intensity was raised to 550 mmol m⁻² s⁻¹ PPF. The results showed that the co-cultured plants hold good compatibility and excellent O₂-generating and CO₂-absorbing capability. They could also supply some fresh edible vegetable for a 2-person crew.     

过氧化氢/紫外线/臭氧氧化技术处理肼类污水的应用

采用放大试验规模（处理量1 m³/h）的H₂O₂（过氧化氢）/UV（紫外线）/O₃（臭氧）氧化技术处理肼类推进剂污水，在30.0±1.6 ℃，pH=9.0±0.2的条件下，研究肼类的过氧化氢增强光解臭氧化降解。对比不同氧化技术的协同效应以及对污水降解的影响，重点考察过氧化氢、紫外线、臭氧和初始浓度等工艺参数对降解效果的影响，对氧化技术的应用进行了优化。研究结果表明：该技术可使COD去除率提高27.66%，肼类的降解速率随着过氧化氢投加量、紫外线辐射强度、O₃投加速率和水质地提高而升高，随着初始质量浓度的提高而下降。在最佳工艺下，处理5 000 mg/L质量浓度的废水，处理60 min时，COD去除率分别为98.62%（偏二甲肼）、99.17%（甲基肼）、99.94%（肼）和93.25%（单推-3）。     

一种应用于实时深空干涉测量的电离层时延修正方法

针对"嫦娥4号"中继星任务S频段信标信号的高精度实时干涉测量需求,结合深空测控干涉测量系统采用的稀疏标校工作模式,研究验证了一种面向测控模式实时干涉测量的电离层时延修正方法。首先分析了电磁波经电离层传播的延迟机理及特性;基于深空站历史观测数据,通过自相关函数分析验证了天顶向TEC的周日特性;在此基础上,结合深空干涉测量中心数据处理设备软件系统,讨论了电离层时延修正方法;通过任务期间的实测数据处理分析,验证了所提方法可以将实时测量精度提升1～3 ns,对低仰角跟踪弧段,该技术方法优势更为明显。该方法为后续深入推进深空测控干涉测量系统在任务中的实时应用提供了技术储备。     

J2轨道模型对月地激光通信预瞄准精度影响研究

基于J_2轨道预测模型,设计了不同倾角和轨道高度圆轨道月球卫星,通过将J_2轨道预测模型预瞄准仿真结果与直接积分RKF7(8)法仿真结果相对比,研究了不同类型月球卫星轨道对-Y面卫星舱板激光通信终端瞄准精度的影响。仿真结果表明,J_2轨道预测模型可以满足月球极地卫星月地激光通信要求,当轨道高度为1 000 km和2 000 km的时候,10 min方位角偏差不超过40μrad,而俯仰角偏差仅为7μrad时,在一定程度上J2轨道预测模型可以满足月地激光通信预瞄准要求。     

FOD缺口型损伤对TC4疲劳极限强度的影响

针对TC4钛合金风扇/压气机叶片前缘常遭受的外物损伤(FOD)缺口型损伤,进行了不同冲击角度下高速弹道冲击试验研究、损伤特征与应力集中分析,开展了冲击后不处理和冲击后去残余应力退火试样的高循环疲劳试验和疲劳极限强度预测。结果表明:随着冲击角度的增大入射侧损伤尺寸和应力集中系数基本保持不变,出射侧缺口损伤深度和损伤长度减小。损伤深度范围为0.6~1.5mm,应力集中系数范围为2.6~3.4。缺口型损伤试样的疲劳极限强度下降为光滑试样的27%~53%,与应力集中系数并不是呈反比关系。退火试样的高循环疲劳(HCF)性能或略微下降或基本不变,表明残余应力影响较小,残余应力对疲劳极限强度的影响程度不足光滑试样的10%。缺口型损伤试样的HCF性能与损伤底部半径的相关性不明显,随着最大损伤深度和损伤长度的增加而下降,表明制定维修手册时应着重考虑缺口型损伤的最大深度和损伤长度。Peterson经验公式对HCF性能的预测精度不理想,误差最大为45%,需要发展高精度的FOD缺口型损伤构件HCF性能预测方法。      

YE4系列超超高效率三相异步电动机效率验证的研究

IE4超超高效率为国际电工委员会发布的IEC 60034-30-1:2014标准中电动机的最高效率等级。采用B法——测量输入-输出功率的损耗分析法对YE4系列(IP55)三相异步电动机的各大损耗的精准测试,以及采用不同降耗设计措施所达效果等进行了实际验证,确保了全系列电机达到了IE4效率等级规定。YE4系列产品的成功开发及推广应用,将对进一步推进我国节能减排政策的落实做出重要的贡献。