高超声速伸缩式变形飞行器再入制导方法

针对高超声速变形飞行器再入制导问题，提出了一种采用伸缩式机翼的高超声速变形飞行器外形方案，建立了含有展长变形量的气动模型和动力学模型。将该变形飞行器的展长变形量扩展为控制变量，分析了倾侧角、展长变形量和终端航程、高度之间的关系。在此基础上，利用倾侧角和展长变形量在线预测剩余航程和终端高度，通过数值方法校正2个控制量以满足航程约束和高度约束，通过航向角走廊确定倾侧角符号。仿真结果表明:该变形飞行器再入制导方法制导精度高，相比于传统固定外形飞行器终端约束能力更强、轨迹更加平滑，且在扰动条件下具有一定鲁棒性。      

环氧树脂基复合材料加筋板结构吸湿行为研究

环氧树脂基复合材料的性能对湿热环境敏感，掌握该材料所组成结构的吸湿行为对其实际应用具有重要意义。通过以碳纤维环氧树脂基复合材料层合板的non-Fickian吸湿模型为基础，建立环氧树脂基复合材料加筋板结构的non-Fickian吸湿模型，在70℃/85% RH湿热条件下开展加筋板结构的吸湿实验，对所建立模型进行验证，并与已有的加筋板吸湿模型进行对比，通过所建立模型给出了加筋板沿厚度方向的吸湿量分布规律。结果表明:所建立加筋板non-Fickian吸湿模型的计算结果与实验结果吻合良好，在整个吸湿阶段相对误差小于5%，模型的预测精度高于传统Fick模型。所建立的加筋板non-Fickian吸湿模型可用于环氧树脂基复合材料加筋板层合结构吸湿量的准确预测。      

升力体式浮升混合飞艇多学科设计优化

升力体式混合飞艇是全球远距离大载重运输的重要选择，随着全球贸易的发展，逐渐成为国内外的研究热点。作为航空宇航技术、新能源技术和高性能材料技术相结合的新概念飞行器，混合飞艇设计过程需对多个学科进行综合考虑和优化。为了将多学科设计优化（MDO）方法引入到混合飞艇的总体设计中，将其分解为能源子系统、气动和推进子系统以及结构和重量子系统。在子系统模型构建的基础上，提出具有自适应能力的基于响应面的并行子空间优化（CSSO-RS）算法，将重量平衡和能量平衡作为实现远距离载重运输的约束条件，并提出爬升、日间巡航、滑翔和夜间巡航的多阶段任务剖面，以充分利用太阳能电池、燃料电池和锂电池的优势，实现混合飞艇的最优化设计。优化结果表明:具有自适应能力的优化算法在精确度和计算效率上均有明显的优势，同时重量分配的结果也为混合飞艇结构轻量化设计和能源系统设计提出了更高的要求。      

火箭发动机超声速过膨胀射流气动噪声特性研究

采用大涡模拟LES方法计算了火箭发动机超声速过膨胀射流形态及近场声压分布,研究了入口温度与环境温度的比值(温度比)对声场的影响;将声源分解,基于Ffowcs Williams-Hawkings (FW-H)方程获取了不同位置噪声源的远场噪声,并根据声压级频谱和湍流形态分析了超声速射流噪声的产生机理。研究表明,超声速过膨胀射流气动噪声由湍流混合噪声和宽频激波噪声组成,近场噪声源以马赫波形式向大方位角辐射中高频噪声,下游大尺度湍流向低方位角范围辐射低频噪声,声压级峰值频率随观测角度增大而升高;随温度比升高,马赫波辐射角度增大,噪声指向性发生改变。该研究可为运载火箭发动机地面试车或火箭发射段声学环境设计提供参考。     

期望状态序列导向的深空探测器规划修复方法

Aiming at the challenges caused by the persistence, concurrency and energy consumption of probe actions, a plan repair method of deep space probe based on the expected state sequence is proposed. In this method, the expected state sequence is formed of the expected effect of the unfinished action and the expected precondition of the unexecuted action in the pre designed plan, according to the execution status of the action. The expected state sequence is an ordered set of states with mixed logic and energy, providing subgoals for plan repair and also transforming the plan repair problem into the state transition path searching problem. During the search, the plan repair strategy with energy supply priority is proposed, which separates the logic repair from energy repair to reduce the difficulty of solving the problem. And this method enables the probe to recover from plan failure autonomously. Finally, the effectiveness and rationality of the proposed method are verified through simulation by taking the Mars Orbiter as an example.     

Formation flying reconfiguration manoeuvres via environmental forces in highly elliptical orbits

A study on reconfiguration manoevres applied to a tetrahedral formation in highly elliptical orbits is proposed, by using a propellantless solution. The manoeuvring strategy consists in exploiting certain environmental forces, specifically those provided by solar radiation pressure and atmospheric drag, by actively controlling the satellites’ attitudes. Through inverse dynamics particle swarm optimization the optimal attitudes required for the manoeuvres are evaluated, whereas the configuration’s evolution is simulated by a high-fidelity orbital simulator. The goal of the reconfiguration problem is to find an optimal control in order for the four spacecraft to reach a desired configuration in a specified portion of orbit, where the desired configuration is evaluated by a shape and size geometric parameter. By increasing the manoeuvring time and the satellites’ area to mass ratio, all the case studies considered are successfully verified.     

考虑捷联导引头最小视场角约束的制导策略

针对高超声速飞行器捷联导引头，提出导引头最小视场角（FOV）约束问题。首先分析了导引头视线角变化规律，指出在攻击固定目标时，导引头最小视场角约束在弹道末段无法被满足，导引头将丢失目标。在此基础上，基于缩短导引头丢失目标距离的目标，提出一种满足导引头最小视场角约束的制导策略。该策略不依赖于末制导律形式，当最小视场角约束无法被满足时，改变原有制导指令，主动改变弹道轨迹以增加弹体视线角，避免超出视场范围。其次，针对飞行器过载约束，设计了制导策略切换点，在到达切换点时该制导策略将结束工作，避免末端过载过大超出约束。通过对比仿真验证了所提出制导策略有效性，能够大幅度减少导引头丢失目标距离，工程上有利于提高末端命中精度。     

Modelling ignition probability with pairwise mixing-reaction model for flame particle tracking

Reduced order models for ignition analysis can offer insights into ignition processes and facilitate the combustor optimization. In this study, a Pairwise Mixing-Reaction (PMR) model is formulated to model the interaction between the flame particle and the surrounding cell mixture during Lagrangian flame particle tracking. Specifically, the model accounts for the two-way coupling of mass and energy between the flame particle and the surrounding shell layer by modelling the corresponding turbulent mixing, chemical reaction and evaporation process if present. The state of a flame particle, e.g., burnt, hot gas or extinguished, is determined based on particle temperature. This model can properly describe the ignition process with a spark kernel being initiated in a nonflammable region, which is of practical importance in certain turbine engines and has not been rigorously accounted for by the existing models based on the estimation of local Karlovitz number. The model is integrated into an ignition probability analysis platform and is demonstrated for a methane/air bluff-body flame with the flow and fuel/air mixing characteristics being extracted from a non-reacting simulation. The results show that for the spark location being at the extreme fuel-lean outer shear layer of the recirculation zone, PMR can yield ignition events with a significant number of active flame particles. The mechanisms for the survival of the initial flame particles and the entrainment of the survived flame particles into the recirculation zone are analyzed. The results also show that the ignition probability map from PMR agrees well with the experimental observation: a high ignition probability in the shear layer of the recirculation zone near the mean stoichiometric surface, and low ignition probabilities inside the recirculation zone and the top stagnation region of the recirculation zone. The parametric study shows that the predicted shape of the ignition progress factor and ignition probability is in general insensitive to the model parameters and the model is adequate for quantifying the regions with high ignition probabilities.     

A general calculation method to specify center-of-buoyancy for the stratospheric airship with multiple gas cells

As the lighter-than-air (LTA) flight vehicle, the stratospheric airship is a desirable platform to provide communication and surveillance services. During the ascent from sea-level to the mission altitude, the volume of the lifting gas may change significantly, which will result in the change of the center-of-buoyancy (CB). A general calculation method is developed to specify CB for the stratospheric airship with a double-ellipsoid hull and an arbitrary number of the gas cells. The cross-section-integral (CSI) method is used as a basic calculation scenario to specify CB. Considering the complexity in determining the boundary between the helium and air in the gas cell, a searching algorithm is put forward and the specification of CB can be conducted by the iterative calculation. As an important application, the stable condition of the pitch angle is analyzed when the change of CB is involved. Under different initial configurations, the stable pitch angle of the stratospheric airship during the ascent is specified and compared, which shows the advantages of the multi-gas-cell configuration. The results of this paper may provide an important reference for the engineering application of the stratospheric airship.     

紧凑型横向变焦系统关键器件的设计方法与功能验证

变焦系统可实现连续的光学变焦，可对不同景深的目标实现连续成像。在焦深延拓和光学检测等领域具有广泛地应用和发展潜力。本文提出了一种紧凑型可实现连续变焦功能的扁平化位相衍射元件，并设计分析和验证了横向调制相位型变焦衍射元件的功能。通过标量衍射基本理论模型，借助菲涅尔波带和多台阶相位衍射元件的设计方法，实现了横向变焦关键器件的设计仿真和实验验证。并以多波长响应的空间光调制器为基础，搭建了器件相位调制验证实验系统，通过测试证明了所设计器件的变焦能力，仿真和实验测试均可实现5倍变焦目标的有效调制。