1.5级涡轮前后轮缘密封封严流动特性研究

为了研究前后腔轮缘密封封严特性和封严出流与主流的交互作用,对转静叶片之间带有前后封严腔的1.5级涡轮进行了三维定常数值模拟,研究了不同封严流量下前后封严腔出口处流场分布并采用附加变量法对比分析了前后腔轮缘密封效率。结果表明：前封严腔主流燃气入侵位置主要受到来自上游导叶尾迹的影响,后封严腔主流燃气入侵位置主要受到下游导叶前缘位势场影响;封严出流影响了20%叶高以下的主流区域,增大了轮毂二次流强度;采用相同封严流量下时前封严腔的封严效率较后腔更低且有着更大的封严效率波动。     

Parametric study of turbine NGV blade lean and vortex design

The effects of blade lean and vortex design on the aerodynamics of a turbine entry nozzle guide vane (NGV) are considered using computational fluid dynamics. The aim of the work is to address some of the uncertainties which have arisen from previous studies where conflicting results have been reported for the effect on the NGV. The configuration was initially based on the energy efficient engine turbine which also served as the validation case for the computational method. A total of 17 NGV configurations were evaluated to study the effects of lean and vortex design on row efficiency and secondary kinetic energy. The distribution of mass flow ratio is introduced as an additional factor in the assessment of blade lean effects. The results show that in the turbine entry NGV, the secondary flow strength is not a dominant factor that determines NGV losses and therefore the changes of loading distribution due to blade lean and the associated loss mecha-nisms should be regarded as a key factor. Radial mass flow redistribution under different NGV lean and twist is demonstrated as an addition key factor influencing row efficiency.     

透平叶片变切削加工工艺数据库设计与开发

透平叶片是透平机械的核心零件之一,因其复杂的曲面造型和低刚度性,被认为是机械加工中的难题.通过Visual Basic编程语言进行叶片切削工艺数据库开发,在功能上实现面向叶片工艺变切削参数智能推荐、相似工艺实例推理和数控加工工序卡片、程序清单的输出,方便企业用户使用,提高工作效率和准确性..     

航空发动机涡轮叶片精密成形技术及其发展趋势

空心涡轮叶片一直是制约我国高性能航空发动机研制的瓶颈。针对空心涡轮叶片精铸合格率较低的问题,在讨论涡轮叶片精密铸造工艺的基础上,从精铸"控形"及"控性"两方面,对涡轮叶片精铸成形技术的研究成果进行了总结。此外,围绕未来更高性能航空发动机涡轮叶片,从材料、结构、工艺的角度对其发展趋势进行了讨论。分析认为,陶瓷基复合材料有望在发动机涡轮叶片上得到更广泛的应用。     

涡轮叶片先进气膜冷却与相关激光打孔技术进展

航空发动机涡轮叶片依赖于高温基体、热障陶瓷涂层和气膜冷却技术实现高的工作温度,进而实现高的燃油效率和推重比.介绍了气膜冷却技术的演化趋势,并通过猫耳异型孔与直圆孔的仿真对比,指出复杂异型气膜孔的重要性.进一步论述了单步加工异型孔的必要性和工艺方案,指出为解决单晶叶片异型孔加工难题,超短脉冲激光加工虽然成为研究热点,但水助激光加工更应该引起重视.     

Numerical analysis for impacts of nozzle end-clearances on aerodynamic performance and forced response in a VNT turbine

It has been well known that nozzle end-clearances in a Variable Nozzle Turbine (VNT) are unfavorable for aerodynamic performance, especially at small openings, and efforts to further decrease size of the clearances are very hard due to thermal expansion. In this paper, both the different sizes of nozzle end-clearances and the various ratios of their distribution at the hub and shroud sides were modelled and investigated by performing 3D Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) simulations with a code of transferring the aerodynamic pressure from the CFD results to the FEA calculations. It was found that increasing the size of the nozzle end-clearances divided equally at the hub and shroud sides deteriorates turbine efficiency and turbine wheel reliability, yet increases turbine flow capacity. And, when the total nozzle end-clearances remain the same, varying nozzle end-clearances’ distribution at the hub and shroud sides not only shifts operation point of a VNT turbine, but also affects the turbine wheel vibration stress. Compared with nozzle hub clearance, the shroud clearance is more sensitive to both aerodynamic performance and reliability of a VNT turbine. Consequently, a possibility is put forward to improve VNT turbine efficiency meanwhile decrease vibration stress by optimizing nozzle end-clearances’ distribution.     

透平内部非稳态流动试验研究进展

为探究透平内部流场的非稳态特性及其演变特征,通过归纳国内外透平内部流动的试验研究,回顾了轴流透平、向心透平采用的试验方法及取得的研究进展,分析总结了试验方案与研究中存在的问题。目前,轴流式透平与平面叶栅的试验数量较多,试验的压力温度较低;向心式透平试验研究还比较少,并且试验多处于高温高压环境;随着接触式测量设备性能的大幅提升,其目前在透平非稳态试验中得到广泛应用,例如气动探针已经能够满足1×106Hz的高频采集要求;上游尾迹以及叶顶泄漏涡扰动下轴流式透平叶表附面层的转捩机制,以及向心式透平盘腔泄漏流与主流流场的非定常掺混等问题还有待进一步研究。     

Effect of inlet rotating swirl on endwall film cooling for two representative hole arrangements

The swirl generator is widely used in lean-burn combustor to guarantee flame stability and reduce NO_x emissions. Thus, the non-uniformities induced by the swirler would affect and damage film-cooling effectiveness on the turbine components, even blow-off coolant coverage, to some certain extent. The arrangement of film-cooling holes was normally designed to be perpendicular to the axial direction and in standard straight row. In this work we experimentally studied the effects of inlet swirl and mass flow ratio on traditional film cooling holes arrangement and a new arrangement pattern whose holes are located along the isobars. Results indicated that the swirl perturbation would damage film coverage. The film-cooling effect of endwall on which the holes are along the isobars, is invariably more promising than that of endwall on which hole arrangement is perpendicular to axial with the same mass flow of coolant, whether the inlet conditions is uniform or not.     

预旋进气的盘腔系统内流场的数值研究

用CFD软件(FLUENT6.0.12)对预旋进气的盘腔进行了数值模拟，计算中采用了多种湍流模型，包括Spalart—Allmaras单方程、K—epsilon和K-omega多种双方程模型，结果表明Spalart-Allmaras模型与结果符合得较好；通过计算研究了流场结构，流场主要由两个参数旋转比βp和湍流参数λT控制，λT主要决定源区的大小，计算结果验证了自由涡流的存在，并且盘腔压力分布的计算值与理论曲线符合得很好。     

基于特征的航空发动机涡轮叶片参数化设计

从零件层、特征层和参数层的角度,详细分析和阐述了涡轮叶片及其叶身特征、叶身附属特征和标准件之间的关系.给出了涡轮叶片的叶身特征、标准件,以及叶身附属特征中的扰流柱和隔肋特征参数化设计的实例.详细介绍了扰流柱和隔肋的参数化设计过程,以程序设计结合标准模板件的方式实现了扰流柱和隔肋的参数化设计.