C300 穿孔型等离子弧焊接焊缝结晶裂纹的研究

采用光学显微镜、扫描电子显微镜以及Thermal-calc 计算等方法分析了马氏体时效钢(C300) 穿
孔型等离子弧焊接(Keyhole-Plasma Arc Welding, K-PAW)过程中结晶裂纹的成因及形貌。研究认为,C300 虽
然具有良好的焊接性,但也会产生结晶裂纹。本试验条件下,影响高纯净C300 产生结晶裂纹的主要因素是应
变—温度增长速率,提高预热温度和增加线能量有利于降低结晶裂纹倾向。焊接热源对母材的预热作用有利
于已形成结晶裂纹的逐步止裂。具有凸形表面的焊缝以及细小等轴晶的焊缝的结晶裂纹倾向较小。     

A stationary bow shock model for plasmas: The spherical blunt obstacle problem

We present an analytic model of a stationary bow shock which describes the interaction between a supermagnetosonic ambient wind and an obstacle with spherical-like frontal shape. We develop expressions for the bow shock’s geometry and the physical properties of the plasma sheath as functions of the upstream conditions. The solution is limited to magnetic fields parallel to the upstream velocity. The model allows to use any value of the upstream alfvenic and sonic Mach numbers and the polytropic index (γ$\gamma$), pointing out the influence of γ$\gamma$ for the magnetosheath compression and the bow shock shape. When both Mach numbers are small, the upstream magnetic field intensity affects also the bow shock shape. We compare our results with other models finding important consistencies. We also compare our results with in-situ data, we fund a reasonable qualitative agreement; however, it seems that our model underestimates the magnetosheath size.     

Total electron content of the ionosphere at two stations in East Africa during the 24–25 October 2011 geomagnetic storm

The equatorial ionosphere has been known to become highly disturbed and thus rendering space-based navigation unreliable during space weather events, such as geomagnetic storms. Modern navigation systems, such as the Global Positioning System (GPS) use radio-wave signals that reflect from or propagate through the ionosphere as a means of determining range or distance. Such systems are vulnerable to effects caused by geomagnetic storms, and their performance can be severely degraded. This paper analyses total electron content (TEC) and the corresponding GPS scintillations using two GPS SCINDA receivers located at Makerere University, Uganda (Lat: 0.3^o N; Lon: 32.5^o E) and at the University of Nairobi, Kenya (Lat: 1.3^o S; Lon: 36.8^o E), both in East Africa. The analysis shows that the scintillations actually correspond to plasma bubbles. The occurrence of plasma bubbles at one station was correlated with those at the other station by using observations from the same satellite. It was noted that some bubbles develop at one station and presumably “die off” before reaching the other station. The paper also discusses the effects of the geomagnetic storm of the 24–25 October 2011 on the ionospheric TEC at the two East African stations. Reductions in the diurnal TEC at the two stations during the period of the storm were observed and the TEC depletions observed during that period showed much deeper depletions than on the non-storm days. The effects during the storm have been attributed to the uplift of the ionospheric plasma, which was then transported away from this region by diffusion along magnetic field lines.     

稳态等离子体推力器羽流仿真及其对微波的衰减和相移作用

为了评估稳态等离子体推力器（SPT）羽流对微波造成的衰减和相位变化,使用二维轴对称的PIC-DSMC方法,在空间及室压6mPa的真空舱两种环境下,计算了SPT-100羽流场中的电子分布。在此基础上,通过分析特征频率和计算衰减因子、相位常数,估算了2,4,8,12.5GHz共4个频率微波穿过羽流场时的衰减量和相移。8GHz和12.5GHz微波未发现明显的衰减,相移为10°～120°。2GHz和4GHz微波在喷口附近衰减量范围为10～50dB。仿真结果表明,C波段和S波段在SPT羽流中容易发生衰减,而X波段以上的高频微波衰减量很小,同时这几个波段微波均发生较大相移。真空舱内6mPa背压下对衰减量的预测仅略高于实际飞行情况,但微波相移会有较大误差。     

An empirical model of the plasma environment around Mercury

Since the flyby observations by Mariner 10 in 1974 and 1975, Mercury has been one of the most interesting objects for space physics and planetary exploration. The MESSENGER and BepiColombo missions now plan to revisit this planet. In order to design plasma instruments for the BepiColombo mission, we have estimated electron and ion fluxes around Mercury with an empirical model, which has been developed for the Earth’s magnetotail. The solar wind data needed as input parameters are derived from Helios observations. The result shows that our predicted electron fluxes at aphelion agree well with the Mariner-10 data. It is also noted that ion instruments must cover a very wide dynamic range of proton fluxes. However, the applicability of the Earth’s magnetospheric model to Mercury is, in itself, an important issue for comparative magnetospheric studies.     

减压直流非转移弧等离子体射流速度的静电探针测量

组建了一套利用静电探针诊断技术测量减压直流非转移弧等离子体射流速度的实验系统。对以纯氩为工质的等离子体,在气流量1．25×10^-1kg/s、弧电流80A、真空室压力165Pa的条件下,测量了射流的速度及其分布。结果表明射流在发生器出口处中心最高速度约为1200m／s,在半径20mm处减小到635m／s。沿射流轴线方向的速度梯度约为10（ms^-1）／mm。射流速度随着弧电流增加而缓慢单调增加;当真空室压力从165Pa提高到2kPa时,发生器出口轴线上的射流速度从1200m／s降至570m／s。     

2006年4月5日中等强度磁暴期间观测到的大经度范围等离子体泡

利用分布在70°E～210°E和20°S～40°N之间的GPS台站的数据,分析了2006年4月5日夜间(中等强度磁暴期间)观测到的电离层等离子体泡的特性.结果表明,本次事件中,等离子体泡大约发生在当地日落后1～1.5 h;空间范围为经度90°E～160°E,纬度12°S～33°N.这是第一次利用地基设备观测到如此大经度范围内的等离子体泡.等离子体泡在南半球出现较早,并且存活时间较长.在其产生的过程中,在约1100 km高度上,映射到磁赤道向上的运动速度约为300m/s,并且等离子体泡在高度上有倾斜.东向电场的存在,对激发等离子体泡起到了一定的作用.      

阵列式表面电弧等离子体气动激励控制三角翼流动分离的实验

为探索多路阵列式微秒脉冲表面电弧放电(μs-SAD,Microsecond pulse surface arc discharge)对尖前缘小后掠三角翼流动分离的控制效果和作用机理,首先通过放电测试和纹影测试对多路阵列式μs-SAD的激励特性进行研究,揭示其对流场的作用原理,进一步将多路阵列式μs-SAD用于三角翼流动控制,开展了小后掠三角翼流动分离控制低速风洞实验,研究了来流速度、激励电压和激励频率等参数对控制效果的影响规律。结果表明:多路阵列式μs-SAD能够快速放热,单路瞬间放电能量可达68mJ,在流场局部可诱导产生冲击波;机翼前缘多路阵列式μs-SAD能有效改善三角翼大迎角气动特性,当来流速度为30m/s时,使最大升力系数提高27.2%,失速迎角推迟4°;来流速度增大到40m/s时,流动控制效果减弱,使最大升力系数提高15.5%;存在最佳激励频率使无量纲频率F+=1时,控制效果最好;激励电压存在阈值,其随来流速度的增加而增大,当激励电压超过阈值电压继续增大时,流动控制效果不再增强。     

国外隐身材料研究进展

简单回顾了从二次世界大战至今几十年间,国外隐身材料的发展历程;系统综述了国外在陶瓷材料,导电高分子材料,晶须材料,纳米材料,手征材料等新型隐身材料研究方面所取得的进展,从耐高温隐身材料,智能隐身材料,等离子体隐身三个方面入手,重点介绍了国外近年来在隐身材料领域的最新进展;并且指出了隐身技术未来的发展方向。     

离子推力器放电室阳极壁面电流密度分布特性研究

为了准确掌握离子推力器放电室阳极壁面电流密度分布特性，并深入理解阳极壁面处等离子体运动特性，设计了近阳极壁面等离子体诊断的具体实施方案，并基于LIPS-200离子推力器开展了近阳极壁面处等离子体诊断试验研究，得到了主要磁极附近壁面等离子体参数，并得到阳极壁面吸收电流密度分布特性。试验结果表明：LIPS-200离子推力器阳极壁面处主要磁极附近的等离子体密度范围为，测试点的电子温度范围为，壁面电流密度范围为；柱段壁面电子温度相对锥段较低，但电流密度较大，尤其在中间极靴位置电流密度最大，约为阴极极靴处电流密度的3倍，约为屏栅极靴处电流密度的2倍，阳极电流主要在放电室中间极靴处发生损失。