用两颗GPS卫星确定低轨卫星轨道的初值方法

研究了用两颗全球定位系统（ＧＰＳ）卫星粗略确定低轨卫星轨道的问题,并着重讨论了其中的初值问题,给出了一种有效的初值方法。实验结果证明：这种方法能给出一个确定的、实用的初值,大大减少了初轨计算的计算量,并使得算法收敛更加有保障。在工程实用方面比传统的猜测方法具有较大的优势。     

Estimation of ballistic coefficients of low altitude debris objects from historical two line elements

This paper presents a new method for estimating ballistic coefficients (BCs) of low perigee debris objects from their historical two line elements (TLEs). The method uses the drag perturbation equation of the semi-major axis of the orbit. For an object with perigee altitude below 700 km, the variation in the mean semi-major axis derived from the TLE is mainly caused by the atmospheric drag effect, and therefore is used as the source in the estimation of the ballistic coefficient. The method is tested using the GRACE satellites, and a number of debris objects with external ballistic coefficient values, and agreements of about 10% are achieved.     

大角度月面异面动力上升制导策略研究

针对月球探测器大角度异面动力上升入轨问题,提出了一种共面间接上升策略。该策略基于显式制导(E制导)律和轨道机动原理,经过共面动力上升、轨道滑翔2个过程和2次轨道机动,实现大角度异面上升。仿真结果表明:1)E制导律均能实现共面和异面的在线实时制导;2)与传统的平面修正上升策略相比,燃料一定时,轨道转移方法发射窗口明显较大,这在实际应用中应对突发紧急情况随时准备月面起飞有重要的工程意义。     

轨姿控发动机动态推力与推力矢量测试系统研制

针对目前轨姿控发动机动态推力与推力矢量测试系统测量精度低、测试覆盖面不全及操作的复杂性,研制了一套基于压电测力平台的动态推力与推力矢量测试系统。此系统的研制攻克了测力平台结构参数优化技术、标准信号发生器设计技术、测试相间干扰处理技术等五项关键技术点.实现了连续脉冲力及多方向力的测量,系统操作可靠、便捷,各项测试指标满足总体要求,为动态推力及推力矢量测试提供了手段。     

嫦娥三号探测器连续姿控的轨道动力学模型补偿及实现

针对嫦娥三号探测器的连续姿控喷气对飞行轨道产生的扰动影响,在精密定轨中建立了经验力补偿模型,并使用最小二乘估计算法计算经验力模型参数与探测器轨道。通过重叠弧段轨道精度评估法对该模型补偿效果进行了验证,结果显示,定轨预报的星历误差以及拟合残差均有所改善,特别是环月轨道的定轨精度由百米量级提高到十米量级。     

地月循环轨道动力学建模与计算研究

根据地月循环轨道的概念,按照生成第二类周期轨道的弧段进行分类,并讨论了其共振性与对称性在轨道设计与应用中的作用。然后归纳了三种循环轨道的动力学建模与计算方法及其轨道延拓策略,最后总结了三种方法的利弊和应用轨道类型。对地月系统循环轨道的研究和分析,能够为我国未来载人登月工程提供一种新的思路与理论支持。     

Closed-loop distance-keeping for long-term satellite cluster flight

Cluster flight is a term used for describing multiple satellites that are being held within pre-defined minimum and maximum distances for long time intervals, possibly the entire mission. This technology is required for a myriad of space architectures and missions, including disaggregated space architectures. Whereas the literature is abundant with works on control laws for satellite formation flying, there are only a handful of works on control of cluster flight. The purpose of the current work is to develop a cluster flight control algorithm, which is able to keep the satellites of the cluster within pre-specified minimum and maximum distances, while utilizing small amounts of propellant. The newly developed algorithm relies on the natural inter-satellite distance dynamics. The algorithm incorporates realistic mission constraints, such as constant-magnitude thrust, and is implemented in feedback form, steering the mean elements to judiciously selected reference values. Simulations indicate that a few tens of grams of propellent are sufficient for operating a cluster flight mission in excess of 1 year, using low specific-impulse thrusters.     

基于借力飞行技术的星际多目标交会转移轨道设计

针对深空探测中的转移轨道问题,提出一种星际多目标交会转移轨道设计方法。该方法基于Tisserand原理,采用能量曲线确定交会目标的序列,由Pork-Chop图确定设计参数的可行域和时序,避免了传统方法在交会目标序列和初始轨道段设计中的缺陷。将多目标交会转移轨道设计问题归结为一种非线性多约束多变量搜索寻优问题,通过梯度下降法,选取目标函数的负梯度方向作为每步迭代的搜索方向,逐步逼近目标函数的极小值点,从而使转移轨道优化问题得到简化。最后,将本文的设计方法用于解决欧空局的ROSETTA任务深空转移轨道的设计,设计结果与欧空局公布的结果一致,从而验证了该设计方法的可行性和正确性。     

Orbit Design for Twin-spacecraft Space VLBI

Space Very Long Baseline Interferometry (S-VLBI) is an aperture synthesis technique utilizing an array of radio telescopes including ground telescopes and space orbiting telescopes. It can achieve much higher spatial resolution than that from the ground-only VLBI. In this paper, a new concept of twin spacecraft S-VLBI has been proposed, which utilizes the space-space baselines formed by two satellites to obtain larger and uniform uv coverage without atmospheric influence and hence achieve high quality images with higher angular resolution. The orbit selections of the two satellites are investigated. The imaging performance and actual launch conditions are all taken into account in orbit designing of the twin spacecraft S-VLBI. Three schemes of orbit design using traditional elliptical orbits and circular orbits are presented. These design results can be used for different scientific goals. Furthermore, these designing ideas can provide useful references for the future Chinese millimeter-wave S-VLBI mission.