FY-3A卫星星内辐射剂量评估与分析

对FY-3A卫星近四年的辐射剂量数据进行分析,结果表明,在1 mm铝的等效屏蔽厚度下,星内辐射剂量存在显著的方向性差异,+Y向剂量增长变化显著大于+Z向.深入分析剂量变化与带电粒子辐射关系后发现,太阳质子事件期间的高能质子增长不会对辐射剂量增长变化产生显著影响;而高能电子是剂量增长变化的主要贡献者,其中扰动导致的高能电子通量强增长是使得辐射剂量显著增加的主要原因,并显著影响到卫星+Y向.进一步与工程常用SPENVIS剂量计算结果的对比表明,实测能更好地反映剂量动态变化和方向差异.综上,实测剂量数据对于同类工程星内器件的合理布局和工程防护设计具有一定指导和参考价值.     

采用阵列天线的GPS接收机的多径抑制方法

提出一种新的用于阵列天线GPS接收机的多径抑制方法。考虑到通常GPS视线信号的来波方向与多径的来波方向不同,在每个导航数据符号位内测距（C/A）码重复,通过对阵列接收的信号矢量与它本身的延迟信号矢量互相关,提高接收机前端信噪比,再利用最大特征值法和前后向空间平滑技术准确地估计期望卫星视线信号（LOSS）的来波方向。最后综合多个GSC子阵列有效地降低了相关多径对码跟踪精度的影响。仿真结果显示,该方法能使接收机在与LOSS码同步前准确估计LOSS的角度信息,有效抑制相关多径,且鉴相结果准确。     

The effect of spatial truncation error on variance of gravity anomalies derived from inversion of satellite orbital and gradiometric data

The spatial truncation error (STE) is a significant systematic error in the integral inversion of satellite gradiometric and orbital data to gravity anomalies at sea level. In order to reduce the effect of STE, a larger area than the desired one is considered in the inversion process, but the anomalies located in its central part are selected as the final results. The STE influences the variance of the results as well because the residual vector, which is contaminated with STE, is used for its estimation. The situation is even more complicated in variance component estimation because of its iterative nature. In this paper, we present a strategy to reduce the effect of STE on the a posteriori   variance factor and the variance components for inversion of satellite orbital and gradiometric data to gravity anomalies at sea level. The idea is to define two windowing matrices for reducing this error from the estimated residuals and anomalies. Our simulation studies over Fennoscandia show that the differences between the 0.5°×0.5°$0.5°\times 0.5°$ gravity anomalies obtained from orbital data and an existing gravity model have standard deviation (STD) and root mean squared error (RMSE) of 10.9 and 12.1 mGal, respectively, and those obtained from gradiometric data have 7.9 and 10.1 in the same units. In the case that they are combined using windowed variance components the STD and RMSE become 6.1 and 8.4 mGal. Also, the mean value of the estimated RMSE after using the windowed variances is in agreement with the RMSE of the differences between the estimated anomalies and those obtained from the gravity model.     

智能化战术任务管理系统研究

从感知、评价、决策的认知过程研究了现代军机战术任务管理系统的结构、组成和功能,重点研究了态势评估和任务规划两个关键子系统.建立了基于贝叶斯网络和模糊逻辑推理的态势评估算法及威胁评估模型,采用贝叶斯网络对威胁级别进行了评估,运用模糊逻辑对各威胁源的相对重要性进行了推理,实现了对威胁源威胁级别和相对重要性的连续动态评估.研究了基于动态A^*算法的战术飞机飞行路径在线实时规划问题,实现了态势评估与路径规划两子系统之间的集成.研究结果表明了该系统方案和算法的有效性,任务规划系统能够自适应战场态势的变化.     

A320飞机在低速滑行中滑偏的处理

A320系列飞机在运行中有时会出现低速滑行时滑偏的现象,给航班的安全、正点运行带来了很大的压力.本文分析了引起滑偏的原因,给出针对此类故障的快速处理建议及排故方法,以期节省排除此类故障的时间,对缓解航班运行压力提供帮助.     

谈谈环境工程剪裁和环境试验剪裁

文章简要阐述环境工程剪裁和环境试验剪裁产生的历史背景,环境工程剪裁和环境试验剪裁的定义及其内涵;指出了环境工程剪裁的目的和任务;以表的形式列出了MIL-STD-810F和GJB 150A中相应部分的剪裁要求并进行了对比分析,指出了两标准在剪裁阐述上的不足之处;最后分析了810F前言中有关剪裁的内容和各试验方法的可剪裁程度。     

微量Al 掺杂对2D C/ SiC 性能的影响

以二维编织碳纤维碳布为预制体,采用聚铝碳硅烷(PACS)为聚合物前驱体,应用化学气相渗透(CVI)结合聚合物浸渗-裂解(PIP)工艺制备微量Al掺杂2D C/SiC复合材料。研究微量Al掺杂对C/SiC微观结构、力学、热膨胀和氧-乙炔焰烧蚀性能的影响。结果表明:掺杂微量Al未改变C/SiC的微观结构和热膨胀性能,也未降低其韧性和强度;但微量Al掺杂提高了C/SiC的抗烧蚀性能,含微量Al的SiC氧化形成微量Al熔于SiO2的固熔体,微量Al提高了SiO2的黏度和致密度,减小SiO2挥发,较未掺杂Al的C/SiC相比,线烧蚀率降低了26%。     

旋翼跨音速非定常黏性绕流的高效CFD模拟方法

为提高旋翼跨音速黏性绕流CFD模拟的效率,建立了一套基于隐式LU-SGS算法和OpenMP并行策略的旋翼非定常流场高效数值求解方法。首先,基于二维剖面翼型的Poisson方程求解和网格插值、翻折方法生成绕桨叶的O-C-O型贴体正交网格,并采用高效的"扰动衍射"(Disturbance diffraction method,DDM)挖洞方法、并行化″Inverse map″(IM)的贡献单元搜索方法,构建了旋翼运动嵌套网格系统。在此基础上,以耦合S-A湍流模型的非定常RANS方程为主控方程,对流通量采用高精度的Roe-MUSCL格式进行离散,时间推进采用隐式LU-SGS双时间方法,同时采用OpenMP并行策略加速旋翼流场求解。最后,运用所建立的方法分别对悬停ONERA 7A旋翼、前飞Caradonna-Tung(C-T)旋翼无升力状态及SA349/2旋翼有升力状态的气动特性及涡尾迹特征进行了模拟,通过与试验值对比验证了文中方法在旋翼非定常流场CFD模拟中的有效性和高效性。     

LXI仪器的LAN设置及控制

在介绍了LXI仪器类型、Non Auto-MDIX含义、Agilent33220A函数发生器性能和功能的基础上,以33220A函数/任意波形发生器的LAN接口设置为例,描述了其LAN接口DHCP,Auto IP,IP Address,SubnetMask,Default Gateway,Host Name,Domain Name,DNS Server,Password等参数的含义、设置方法,介绍了充分利用其提供的接口功能,达到远程控制其输出的方法。该方法达到了通过GPIB控制函数/任意波形发生器的同样效果,利用其LAN接口组建分布式测试系统,对程序设计者具有较高的参考借鉴价值。     

Onboard orbit determination using GPS observations based on the unscented Kalman filter

Spaceborne GPS receivers are used for real-time navigation by most low Earth orbit (LEO) satellites. In general, the position and velocity accuracy of GPS navigation solutions without a dynamic filter are 25 m (1σ) and 0.5 m/s (1σ), respectively. However, GPS navigation solutions, which consist of position, velocity, and GPS receiver clock bias, have many abnormal excursions from the normal error range for space operation. These excursions lessen the accuracy of attitude control and onboard time synchronization. In this research, a new onboard orbit determination algorithm designed with the unscented Kalman filter (UKF) was developed to improve the performance. Because the UKF is able to obtain the posterior mean and covariance accurately by using the second-order Taylor series expansion through the sampled sigma points that are propagated by using the true nonlinear system, its performance can be better than that of the extended Kalman filter (EKF), which uses the linearized state transition matrix to predict the covariance. The dynamic models for orbit propagation applied perturbations due to the 40 × 40 geo-potential, the gravity of the Sun and Moon, solar radiation pressure, and atmospheric drag. The 7(8)th-order Runge–Kutta numerical integration was applied for orbit propagation. Two types of observations, navigation solutions and C/A code pseudorange, can be used at the user’s discretion. The performances of the onboard orbit determination were verified using real GPS data of the CHAMP and KOMPSAT-2 satellites. The results of the orbit determination were compared with the precision orbit ephemeris (POE) of the CHAMP and KOMPSAT-2 satellites.