异构多星编队的脉冲构型保持控制方法

近地轨道的双星编队通常设计具有自稳定性的编队构型参数初值，通过保持编队构型参数形成长期稳定的相对周期运动。针对编队中卫星数量增多产生的相对运动耦合问题，提出了基于Hill坐标和三角函数公式的多星相对运动分析方法。基于SAR载荷测量基线定义，结合多星编队构型参数的相对运动特性，提出了编队构型参数的设计方法，能够实现多星编队的最大有效基线组合。通过分析J2项摄动和大气阻力摄动的长期影响，研究了异构多星编队的相对运动衍化规律，提出了主从形式的脉冲偏置控制，能够有效保持针对异构多星编队设计的编队构型。通过面质比异构的四星编队控制仿真，验证了脉冲偏置控制形式下异构多星编队构型保持控制方法的有效性。     

Fractional order adaptive robust formation control of multiple quad-rotor UAVs with parametric uncertainties and wind disturbances

In recent times, multiple Unmanned Aerial Vehicles (UAVs) are being widely utilized in several areas of applications such as agriculture, surveillance, disaster management, search and rescue operations. Degree of robustness of applied control schemes determines how accurate a swarm of UAVs accomplish group tasks. Formation and trajectory tracking controllers are required for the swarm of multiple UAVs. Factors like external environmental effects, parametric uncertainties and wind gusts make the controller design process as a challenging task. This article proposes fractional order formation and trajectory tacking controllers for multiple quad-rotors using Super Twisting Sliding Mode Control (STSMC) technique. To compensate the effects of the disturbances due to parametric uncertainties and wind gusts, Lyapunov function based adaptive controllers are formulated. Moreover, Lyapunov theorem is used to guarantee the stability of the proposed controllers. Three types of controllers, namely fixed gain STSMC and fractional order Adaptive Super Twisting Sliding Mode Control (ASTSMC) methods are tested for the swarm of UAVs by performing the numerical simulations in MATLAB/Simulink environment. From the presented results, it is verified that in presence of wind disturbances and parametric uncertainties, the proposed fractional order ASTSMC technique showed improved robustness as compared to the fixed gain STSMC and integer order ASTSMC.     

编队星座星间相对状态测量的间接实现

研究利用编队卫星间伪距测量值 ,自主确定编队星座星间相对状态的有关问题。文中针对编队星座的卫星之间存在发射和接收天线不能相互覆盖的情况 ,提出了间接覆盖概念。并给出系统的数学模型 ,分析实现间接覆盖的方法并进行协方差分析。最后 ,对间接覆盖情况作了仿真 ,仿真结果证明间接覆盖在星间相对状态测量中的可行性     

TC4-DT钛合金线性摩擦焊接头组织特征及其形成机制

研究TC4-DT损伤容限型钛合金线性摩擦焊(linear friction welding,LFW)接头的组织特征及形成机制。利用光镜和扫描电镜对接头各区域微观组织进行表征,利用显微硬度计测试接头的显微硬度分布。结果表明:接头焊缝区(WZ)发生动态再结晶,焊接过程中WZ温度超过β转变点,焊后快冷的条件下发生了β→α′及β→α两种相变并析出了大量α′马氏体以及二次层片α;TC4-DT钛合金母材(BM)组织具有较高的变形抗力,使得接头形成的热力影响区(TMAZ)较窄。TMAZ内组织在强烈的热力耦合作用下拉长变形并破碎,焊后快冷的条件下析出少量α′马氏体及大量二次层片α;毗邻TMAZ的热影响区(HAZ)基本保留了BM不同位向的α集束的组织特征,但受热的影响α集束内α/β相界两侧元素相互扩散,层间β消耗,初生α长大;WZ组织的细晶强化和第二相强化,TMAZ组织的应变强化和第二相强化,以及HAZ内α相的长大使得接头上述区域显微硬度均高于BM。     

Robust optimal sliding mode control for the deployment of Coulomb spacecraft formation flying

Inter-spacecraft electrostatic force (Coulomb force) is desirable for close formation flying control because of its propellant-less and free contaminate characteristics attributed to the propellant exhaust emission. This paper presents robust optimal sliding mode control to deal with the problem of thruster saturation in tracking the formation trajectory for Coulomb spacecraft formation flying. The robust controller design is based on optimal control theory as a linear quadratic system, and it is augmented with an integral sliding mode control technique. The stability of the closed-loop system is guaranteed using the second Lyapunov method. The developed controller outperforms the existing ones, because it has a higher degree of fine-tuning to cope with the uncertainty. Numerical simulations are employed to confirm the efficiency of the developed controller.     

双星InSAR时间同步误差对相位同步的影响

针对双星编队的InSAR雷达系统，提出了SAR与相位同步一体化的系统框架，在双星时间同步误差的基础上，提出了一种综合考虑时间同步误差、SAR和相位同步发射及接收链路时延的双星相位同步设计方法，给出了相位同步补偿后的辅星回波信号相位和双星干涉相位，推导了两种时变相位误差功率谱密度，经过理论分析和仿真试验证明：相位同步补偿后，时间同步误差不影响相位同步精度，只影响辅星目标位置。辅星回波固定相位误差较大，但不影响成像，双星干涉固定相位误差为千分之几度，对干涉测高精度影响可以忽略，辅星回波和双星干涉时变相位误差与主星相近。     

“田园一号”微推进系统设计与性能测试

针对“田园一号”微纳星编队飞行任务的技术需求，开展了微推进系统的总体设计。常规冷气推进由于其比冲低、贮存压力高、结构复杂，难以满足微纳卫星需求。选择R134a作为推进工质，通过将推进剂液化，减小系统体积。基于3D打印技术，设计贮箱、稳压罐、管路一体的推进系统。采用MEMS加工工艺，设计并研制出电加热喷口，从而提高系统比冲。分析了不同喷口尺寸、供气压力以及温度下所产生的推力和比冲大小，确定出喷口设计。表征测试所研制的电加热喷口，结果表明喷口加工误差控制在2%以内。真空条件下，采用扭摆测量系统测试推力器推进性能，测试结果表明，当稳压罐内气体压力在0.1～0.2 MPa变化时，推力大小为5～10 mN。当喷气温度从25℃升至95℃时，推进系统比冲可提升10%以上。