未老化NEPE推进剂/衬层粘接试件拉伸失效模式研究

采用原位拉伸扫描电镜观测不同温度下NEPE推进剂/衬层粘接界面裂纹扩展规律,得出不同温度下裂纹产生位置均出现在推进剂和衬层连接处,且裂纹的扩展存在相互竞争关系;粘接性能较好时,粘接界面的好坏主要取决于推进剂/衬层界面附近推进剂性能。重点考察了会引起推进剂"脱湿"的HMX界面,利用纳米压痕仪及动态力学实验,得出当推进剂中含NPBA时,HMX周围存在一高模量层,且该高模量层的动态储能模量与温度呈反向关系。该高模量层的存在或消失会引起推进剂在宏观性能上发生变化,进而影响推进剂/衬层试件宏观力学性能。     

Robust adaptive fault-tolerant control of a tandem coaxial ducted fan aircraft with actuator saturation

This paper is concerned with the robust adaptive fault-tolerant control of a tandem coaxial ducted fan aircraft under system uncertainty, mismatched disturbance, and actuator saturation. For the proposed aircraft, comprehensive controllability analysis is performed to evaluate the controllability of each state as well as the margin to reject mismatched disturbance without any knowledge of the controller. Mismatched disturbance attenuation is ensured through a structured H-infinity controller tuned by a non-smooth optimization algorithm. Embedded with the H-infinity controller, an adaptive control law is proposed in order to mitigate matched system uncertainty and actuator fault. Input saturation is also considered by the modified reference model. Numerical simulation of the novel ducted fan aircraft is provided to illustrate the effectiveness of the proposed method. The simulation results reveal that the proposed adaptive controller achieves better transient response and more robust performance than classic Model Reference Adaptive Control (MRAC) method, even with serious actuator saturation.     

Vision-based bio-inspired guidance law for small aerial vehicle

During predation, a flying insect can form a stealth flight path. This behavior is called motion camouflage. Based on the study results of this behavior, the perception and neurology of flying insects, a novel bio-inspired guidance law is proposed for the terminal guidance for small aerial vehicle with charge-coupled device imaging seekers. The kinematics relationship between a small aerial vehicle and target is analyzed, and a two-dimensional guidance law model is established by using artificial neural networks. To compare with the proportional guidance law, the numerical simulations are carried out in the vertical plane and in the horizontal plane respectively. The simulation results show that the ballistic of the small aerial vehicle is straighter and the normal acceleration is smaller by using the bio-inspired guidance law than by using the proportional guidance law. That is to say, the bio-inspired guidance law just uses the information of the target from the imaging seeker,but the performance of it can be better than that of the proportional guidance law.     

220GHz频率步进雷达测距的实验研究

频率步进雷达是一种典型的高分辨雷达,它可以通过瞬时窄带合成宽带实现距离向的高分辨的同时降低A／D和其他设备的负担。文章介绍了220GHz频率步进雷达的工作原理和测距的方法,并对不同距离处的角反射器进行探测。实验结果表明,太赫兹雷达对角反射器距离向的探测距离精度可以达到厘米量级;同时,还对太赫兹雷达的探测距离进行了验证,最远探测距离可达35m。     

空间机械臂辅助深层采样阻抗控制策略

针对空间机械臂辅助深层采样任务中的建模与控制问题,基于刚体李群SO(3)方法对机械臂进行建模。通过梯形规划对机械臂进行轨迹规划,采用阻抗控制方法控制机械臂运动。推导了李群SO(3)模型下机械臂关节空间与末端笛卡尔空间之间的雅可比矩阵,并且得到了两个空间的相互转换关系。采用锥互补方法计算采样机械臂与复杂接触面的碰撞力,并基于非光滑算法求解锥互补条件与系统动力学方程。通过对比位置控制与阻抗控制,证明了阻抗控制在实际应用过程中能够更加柔顺地控制机械臂与接触面进行接触。通过对控制参数进行调整,探究了不同控制参数对机械臂控制的影响,优化得到了合适的控制参数,从而能控制机械臂辅助完成深层采样的任务。     

基于hp伪谱同伦凸优化的火箭垂直回收在线轨迹规划方法

针对可重复使用运载火箭垂直回收轨迹优化问题,提出了一种带有最优终端时间估计策略的hp伪谱同伦凸优化在线轨迹规划算法。首先,考虑状态约束和过程约束的非凸性,采用无损凸化处理推力幅值约束;然后,结合同伦方法与不动点迭代思想将气动力与非凸质量约束转化为线性时变剖面,完成问题凸化;进一步基于hp flipped Radau伪谱法对问题进行离散化处理,将最优控制问题转化为参数优化问题,进而采用原-对偶内点法求解;最后,为进一步减少燃料消耗,提升经济效益,考虑最优终端时间难以在线确定的问题,结合解析推导与二次插值法,设计了最优终端时间快速估计策略。仿真结果表明所设计的轨迹优化算法最优终端时间估计速度快,收敛性能良好,具有较高的精度和计算效率,具备在线应用的潜力。     

行星着陆复杂形貌特征匹配与自主导航研究进展

基于行星定点软着陆探测任务的需求,围绕复杂形貌行星着陆过程环境特点,首先分析了行星着陆复杂形貌特征匹配与自主导航所面临的主要技术挑战,随后综述了行星着陆复杂形貌特征匹配与自主导航的研究现状,并概括了行星着陆复杂形貌特征匹配与自主导航所涉及的关键技术。最后对未来行星着陆探测复杂形貌特征匹配与自主导航发展方向进行了展望。     

Sliding mode control based guidance law with impact angle constraint

The terminal guidance problem for an unpowered lifting reentry vehicle against a sta- tionary target is considered. In addition to attacking the target with high accuracy, the vehicle is also expected to achieve a desired impact angle. In this paper, a sliding mode control （SMC）-based guidance law is developed to satisfy the terminal angle constraint. Firstly, a specific sliding mode function is designed, and the terminal requirements can be achieved by enforcing both the sliding mode function and its derivative to zero at the end of the flight. Then, a backstepping approach is used to ensure the finite-time reaching phase of the sliding mode and the analytic expression of the control effort can be obtained. The trajectories generated by this method only depend on the initial and terminal conditions of the terminal phase and the instantaneous states of the vehicle. In order to test the performance of the proposed guidance law in practical application, numerical simulations are carried out by taking all the aerodynamic parameters into consideration. The effec- tiveness of the proposed guidance law is verified by the simulation results in various scenarios.     

绕圆头回转体通气空化流型的实验研究

为了深入了解通气空化流动现象,利用高速全流场显示技术,对绕圆头回转体通气空化流型进行实验研究。结果表明,重力效应和通气量对通气空化的多相流流型起主要作用。定义了弗洛德数和通气率两个无量纲数,将绕圆头回转体通气空化分为5种多相流流型,即透明空泡、透明气弹、透明分层、水气混合以及半透明水气混合。流动参数对流型的影响分为2个阶段,即重力起主要作用阶段和重力效应不明显阶段。在重力起主要作用阶段,通气率一定时,随着弗洛德数的增大,附着弹体的空泡倾斜程度变小,弹体上表面的断裂空泡转变为贴着弹体壁面的稳定空泡;弗洛德数一定时,随着通气率的增大弹体上表面断裂空泡的尺度不断增大。在重力效应不明显阶段,通气率一定时,随着弗洛德数的增大,雷诺数变大,流场的湍流强度增大,空泡尾流区域水气交换的程度加剧;弗洛德数一定时,随着通气率的增大,通气空化数减小,绕弹体的云雾状空泡逐渐转变为透明空泡。最后,进一步分析了重力影响下透明空泡脱落的非定常过程,以及反向射流作用下云雾状空泡交替脱落的非定常过程。     

隔层式多脉冲发动机点火延迟数值仿真研究

隔层式多脉冲发动机点火过程较常规发动机有很多不同,为获得端燃型隔层式多脉冲发动机的点火延迟特性及其影响因素,建立物理和数学模型,采用MpCCI耦合器作为FLUENT与ANSYS的数据交换平台,模拟点火燃气填充隔层和隔层变形过程;采用FLUENT计算多脉冲发动机火焰传播过程及填充过程。计算结果表明,与传统固体火箭发动机相比,在相同点火药量的情况下,多脉冲发动机的点火延迟大大增加;推进剂燃速越高,点火延迟越小;燃烧室自由容积越大,点火延迟越大;隔层材料对点火延迟影响较小。可以通过适当加大点火药量和提高燃速来减小点火延迟。