一种基于余数周期的 PRI精确估计算法

针对传统脉冲重复间隔（PRI）分选算法在估计PRI方面存在的不足，提出了一种对PRI周期信号的周期进行精确估计的算法。该算法首先从待分选脉冲序列中提取出属于一部雷达的脉冲样本，然后利用同余方程的余数周期性质对该雷达脉冲序列的PRI进行精确的估计。相对于传统的PRI估计算法，该算法有效地消除了TOA量化误差对PRI估计造成的影响，可以精确地估计出雷达脉冲序列的准确 PRI数值，从而能够更好地满足信号分选算法的处理需求。理论推导及仿真实验均表明了该算法的有效性。     

圆柱度仪系统误差的验证分析及消除

介绍了在使用MMQ400圆柱度仪测量高精度圆柱度时,通过对不同测量方法的测量数据差异对比及分析,验证测量系统误差对测量的影响,并提出消除系统误差的方法.     

Semi-stochastic modification of second-order radial derivative of Abel–Poisson’s formula for validating satellite gravity gradiometry data

The geoid can be used to validate the satellite gravity gradiometry data. Validation of such data is important prior to their downward continuation because of amplification of the data errors through this process. In this paper, the second-order radial derivative of Abel–Poisson’s formula is modified stochastically to reduce the effect of the far-zone geoid and generate the second-order radial derivative of geopotential at 250 km level. The numerical studies over Fennoscandia show that this method yields the gradients with an error of 10 mE and when the long wavelength of geoid is removed from the estimator and restored after the computations (remove–compute–restore) the error will be in 1 mE level. We name this method semi-stochastic modification. The best case scenario is found when the degree of modification of the integral formula is 200 and the long wavelength geoid to degree 100 is removed and restored. In this case the geoid should have a resolution of 15′ × 15′ and the integration should be performed over a cap size of 3°.     

提高数字器件频率稳定度测量分辨率的研究

提出了一种利用信号时空关系测量相位差来修正差拍周期的方法,并通过实验证明了该方法的正确性和可行性。此方法在提高数字器件频率稳定度测量分辨率方面还有很大的空间,是一种很有潜力的高精度测量技术。     

基于Richardson插值法的CFD验证和确认方法的研究

针对典型高超声速流动问题(T2-97模型),利用Richardson插值法,研究了多套连续变化网格下数值解的空间离散误差、收敛性。通过网格收敛性研究,完成了CFD的验证过程。利用不确定度分析方法,结合实验数据,开展了该问题的确认。研究表明:针对所选问题,在现有实验数据及计算条件下,该问题的CFD得到了验证与确认。     

无源滤波器频率漂移的一种迭代算法

文章介绍了无源滤波器在试验过程中产生的典型幅频特性漂移曲线，并针对这些典型曲线提出了基于均方误差最小原则和牛顿迭代的频率漂移算法。     

射频阵列仿真系统的目标位置精度分析

射频阵列仿真系统是一种比较理想的导弹武器系统抗干扰试验环境,目标位置精度是射频阵列仿真系统的关键指标。阐述了影响目标位置精度的主要原因,并结合测量数据对其进行分析,为工程应用提供了参考。     

火电厂汽包水位测量及误差分析

汽包水位信号的准确测量直接关系到机组的安全稳定运行及汽水调节的品质，是机组安全、稳定运行的重要保证，因此需要采取必要措施提高汽包水位的测量精度并减少测量误差。本文介绍了汽包水位常用的测量方法、汽包水位测量误差产生的原因以及因汽包压力及取样管温度引起的水位测量误差的校核计算方法，提出r适用于发电厂汽包水位校核计算及实际补偿的通用原理和试验方法。     

强光光学零件加工误差频谱分析与控制方法研究

本文利用功率谱密度分析磁流变抛光表面的敏感频率误差,发现走刀步距与中高频误差具有直接的关联性,通过小波算法确定其分布区域后,采用大束径的光顺抛光法对敏感频率误差进行控制,测试结果表明中高频误差得到了有效控制。本研究对强光光学零件加工误差的频谱分析、表征和控制具有指导意义。     

Comparison between observed ionospheric foF2 and IRI-2001 predictions over periods of severe geomagnetic activities at Grahamstown,South Africa

The observed ionospheric F2 critical frequency (foF2) values over a South Africa mid-latitude station, Grahamstown, (geographic coordinates: 33.3°S, 26.5°E), were analysed and compared with International Reference Ionosphere (IRI) model, using the CCIR (Comite´ Consultatif International des Radio communications) and URSI (Union Radio-Scientifique Internationale) coefficients, during four geomagnetically disturbed days in the year 2000. These days are April 5, May 23, August 10 and September 15. The data were analysed for five days around the storm day. Comparisons between the IRI-2001 predicted foF2 values, using both CCIR and URSI coefficients and the observed values are shown with their root-mean-square error (RMSE) and the relative deviation module mean (rdmm) for the various storm periods. The CCIR option performed more accurately than the URSI option.