A large flat panel multifunction display for military and spaceapplications

A flat panel multifunction display (MFD) that offers the size and reliability benefits of liquid crystal display technology while achieving near-CRT display quality is presented. Display generation algorithms that provide exceptional display quality are being implemented in custom VLSI components to minimize MFD size. A high-performance processor converts user-specified display lists to graphics commands used by these components, resulting in high-speed updates of two-dimensional and three-dimensional images. The MFD uses the MIL-STD-1553B data bus for compatibility with virtually all avionics systems. The MFD can generate displays directly from display lists received from the MIL-STD-1553B bus. Complex formats can be stored in the MFD and displayed using parameters from the data bus. The MFD also accepts direct video input and performs special processing on this input to enhance image quality     

Aiming at a 1-cm Orbit for Low Earth Orbiters: Reduced-Dynamic and Kinematic Precise Orbit Determination

The computation of high-accuracy orbits is a prerequisite for the success of Low Earth Orbiter (LEO) missions such as CHAMP, GRACE and GOCE. The mission objectives of these satellites cannot be reached without computing orbits with an accuracy at the few cm level. Such a level of accuracy might be achieved with the techniques of reduced-dynamic and kinematic precise orbit determination (POD) assuming continuous Satellite-to-Satellite Tracking (SST) by the Global Positioning System (GPS). Both techniques have reached a high level of maturity and have been successfully applied to missions in the past, for example to TOPEX/POSEIDON (T/P), leading to (sub-)decimeter orbit accuracy. New LEO gravity missions are (to be) equipped with advanced GPS receivers promising to provide very high quality SST observations thereby opening the possibility for computing cm-level accuracy orbits. The computation of orbits at this accuracy level does not only require high-quality GPS receivers, but also advanced and demanding observation preprocessing and correction algorithms. Moreover, sophisticated parameter estimation schemes need to be adapted and extended to allow the computation of such orbits. Finally, reliable methods need to be employed for assessing the orbit quality and providing feedback to the different processing steps in the orbit computation process. This revised version was published online in August 2006 with corrections to the Cover Date.     

Safety testing of lithium ion batteries for navy devices

Lithium ion battery technology is being introduced into power supplies used by our armed forces for a variety of applications. In many cases, the same cells and design parameters that support commercial battery packs are being used in military battery packs. This approach is expected to result in a major decrease in the total life cycle cost of the equipment these batteries support. On June 13, 1991, NAVSEA issued INST9310.1B1, which states that all lithium battery powered equipment must undergo safety evaluation and approval prior to fleet use. This safety program governs a process whereby approvals are issued for lithium batteries to be used in specific equipment on ground facilities, surface combatants, air combatants, and/or submarines. The Naval Ordnance Safety and Security Activity (NOSSA) manages the program. The chief technical advisors are Code 644 at NSWC Carderock Division and Code 609A at NSWC Crane Division. This paper describes three battery designs that incorporate lithium ion technology, and the results of battery safety tests conducted in accordance with navy requirements.     

Robust Kalman filter design for predictive wind shear detection

Severe low-altitude wind shear is a threat to aviation safety. Newly developed airborne sensors measure the radial component of wind along a line directly in front of an aircraft. The authors use optimal estimation theory to define a detection algorithm to warn of hazardous wind shear from these sensors. To achieve robustness, a wind shear detection algorithm must distinguish threatening wind shear from less hazardous gustiness, despite variations in wind shear structure. Statistical analysis methods to refine wind shear detection algorithm robustness are presented. Computational methods predict the ability to warn of severe wind shear and avoid false warning. Comparative capability of the detection algorithm as a function of its design parameters is determined, identifying designs that provide robust detection of severe wind shear     

Collisions in space: A retrospective overview of ISAS studies

A chronological review of studies in ISAS concerning collisions in space is presented. The collision probability in space with artificial orbiting bodies was estimated, and a Space Traffic Control System was proposed, in 1971. The design of a space station for safety against collision hazards was discussed in 1972. A trajectory optimization technique for low-thrust multiple rendezvous mission in order ti sweep space debris around the earth was developed in 1977. In 1984, the collision probability was reestimated using space bedris data accumulated for more than a decade. Several experimental projects in ISAS, such as hypervelocity impact experiments using a railgun system, sampling and measuring of alumina particles in exhaust plume of solid-propellant propellant rocket motors, and a result of analysis on the behavior of such alumina particles in orbit are also introduced.     

A study on thin walled intersecting spheres

Intersecting spheres are useful in the design of pressure vessels for weight limited situations as in the case of space or ocean applications. This paper treats the general problem of N intersecting spheres demonstrating that mass reduction can be achieved in relation to the single sphere that encloses the same internal volume. It is shown that this reduction approaches asymptotically the value of 39.5%.     

Carrier-wave interference to Loran-C: a statistical evaluation

Loran-C is a pulsed, hyperbolic radio aid for long-range marine, air, and land navigation. The worldwide expansion of Loran-C, especially in Europe, has focused attention on carrier-wave interference to the system. The effects of a multiplicity of carrier-wave interferers (CWIs) on receiver timing measurement accuracy are considered. Both the phase tracking and the cycle-selection performance of receivers are quantified in terms of the probabilities that they will operate correctly within the arbitrarily set error limits. Characteristic functions (CFs) are used to compute these probabilities. Analyses and results are presented for typical situations. The relative sensitivity of the phase tracking and cycle-selection functions to interfering signals are discussed     

Coarse attitude determination from Earth albedo measurements

Attitude estimation algorithms for the Thrusted Vector Mission which determine attitude based on Sun sensor and very coarse albedo sensor measurements are presented. On the basis of these measurements, it has been demonstrated by comparison with more accurate gyro-based attitude that it is possible to estimate three-axis attitude with an average error per axis of 11 deg. Most of this error is about the Sun direction. Both deterministic quick-look and optimal estimates are examined     

Role of BIT in support system maintenance and availability

The role of built in test (BIT) in electronic systems has grown in prominence with the advances in system complexity and concern over maintenance lifecycle costs of large systems. In an environment where standards drive system designs (and provide an avenue for focused advancement in technology), standards for BIT are very much in an evolutionary state. The reasons for advancing the effectiveness of BIT include reduced support overhead, greater, confidence in operation, and increased system availability. The cost of supporting military electronic systems (avionics, communications, and weapons systems) has driven much of the development in BIT technology. But what about the systems that support these end items that contain test and measurement instrumentation - such as automatic test equipment (ATE), simulators and avionics development suites? There has also been a beneficial effect on the maintenance and availability of these systems due to the infusion of BIT into their component assemblies. But the effect has been much more sporadic and fragmented. This paper looks at the state of BIT in test and measurement instruments, explain its affect on system readiness, and present ideas on how to improve BIT technologies and standards. This will not provide definitive answers to BIT development questions, since the factors that affect it are specific to the instrument itself. The topics covered in this paper are: definitions of built-in test, instrument BIT history, importance of BIT fault coverage and isolation in support systems, overview of BIT development process issues that limit the effectiveness of BIT Standards related to instrument BIT, making BIT more effective in support system maintenance and availability and conclusions.     

Commercial technology & avionics architecture

As commercial technology has become more embedded in the military community, there have been attendant effects caused by the rapid progress in technology and by obsolescence. Industry has generated many solutions to mitigate these effects, but their limitations are emerging with time. This is a discussion of higher-level approaches to obsolescence solutions and technology insertion problems that have not hitherto been addressed.