全文获取类型
收费全文 | 95篇 |
免费 | 27篇 |
国内免费 | 18篇 |
专业分类
航空 | 93篇 |
航天技术 | 16篇 |
综合类 | 9篇 |
航天 | 22篇 |
出版年
2023年 | 1篇 |
2022年 | 2篇 |
2021年 | 1篇 |
2020年 | 5篇 |
2019年 | 3篇 |
2018年 | 1篇 |
2017年 | 2篇 |
2016年 | 5篇 |
2015年 | 2篇 |
2014年 | 7篇 |
2013年 | 4篇 |
2012年 | 11篇 |
2011年 | 4篇 |
2010年 | 6篇 |
2009年 | 11篇 |
2008年 | 16篇 |
2007年 | 5篇 |
2006年 | 16篇 |
2005年 | 8篇 |
2004年 | 2篇 |
2003年 | 6篇 |
2002年 | 4篇 |
2001年 | 3篇 |
2000年 | 3篇 |
1999年 | 3篇 |
1998年 | 2篇 |
1997年 | 2篇 |
1996年 | 1篇 |
1995年 | 1篇 |
1993年 | 2篇 |
1989年 | 1篇 |
排序方式: 共有140条查询结果,搜索用时 20 毫秒
111.
通过调用执行于内核态的Vxd设备驱动程序间接实现对端口的访问控制,提高端口访问的安全性。文章讨论了Windows核心结构、内核态设备驱动程序模型及实现原理,重点分析了基于Vxd驱动程序对端口的访问方法及实现过程,并给出了并口控制的驱动程序实例。 相似文献
112.
采用数值计算方法对氧化亚氮/丙烷火炬式点火器的燃烧室和火炬流场特性进行了数值仿真研究,获得了点火器在定混合比工况下工质流量对火炬性能的影响以及定流量工况下余氧系数对火炬性能的影响:在定余氧系数0.350工况下点火器燃烧室压强、火炬功率和点火有效长度与点火器的流量基本呈线性关系,有效火炬长度与实验中所观察到的基本一致;在定流量9 g/s工况下点火器燃烧室压强、喷管出口温度、火炬功率和点火有效长度随余氧系数的不断增加均先迅速增加到最高值后开始逐渐减小,燃烧室压强、喷管出口温度、火炬功率和点火有效长度的计算最高值分别为1.73 MPa,2 823 K,33.14 kW和86.5 mm. 相似文献
113.
由于航空发动机不断向高效率、高推重比方向发展,发动机热端部件表面热障涂层的服役条件也越来越苛刻。稀土锆酸盐作为新型热障涂层材料,其开发和应用受到越来越多国内外学者的关注。Sm2Zr2O7材料在一系列稀土锆酸盐中具有烧绿石结构稳定、低热导率和高热膨胀系数等优点,具有良好的应用前景。为满足热障涂层更高的服役要求,Sm2Zr2O7的掺杂改性及性能研究也成为了研究热点。首先,对热障涂层材料进行了简要概述,然后就Sm2Zr2O7基陶瓷材料及其涂层的晶体结构、热物理性能、力学性能以及抗腐蚀性能等的研究进展进行了详细的介绍,为该材料在热障涂层领域的研究及应用提供参考。 相似文献
114.
采用EB-PVD沉积了3.5%Y2O3-La2(Zr0.7Ce0.3)2O7(3.5Y-LZ7C3)/YSZ双陶瓷热障涂层,分析了涂层的成分、相结构、组织形貌和热循环氧化性能.研究表明:La2(Zr0.7Ce0.3)2O7(LZ7C3)材料中掺杂Y2O3能有效地降低涂层中La2O3/ZrO2/CeO2的成分偏差;双陶瓷涂层在1050℃下氧化增重动力学为M=0.1219t1/3,相比抛物线型YSZ涂层的氧化增重曲线,较大减缓了氧化速度;沉积态双陶瓷涂层表面结构(即3.5Y-LZ7C3涂层结构)为烧绿石结构,经过热循环后逐渐分解,出现了萤石结构以及La2O3的衍射峰;在1050℃双陶瓷层热循环氧化寿命达768h. 相似文献
115.
SiCp/Al2O3-Al composites were synthesized by means of direct metal oxidation method. The composition and microstructures of the composites were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM) and metallurgical microscope. The effects of technical parameters on the properties of the product were analyzed. The results indicate that the composite possesses a dense microstructure, composed of three interpenetrated phases. Of them, SiO2 layer prohibits the powdering of the composites; Mg promotes the wetting and infiltration of the system and Si restricts the interfacial reaction while improving the wetting ability between reinforcement and matrix. 相似文献
116.
用于阻抗变换层的Li2O-Al2O3-SiO2玻璃陶瓷制备及其微波介电特性 总被引:1,自引:0,他引:1
采用热压和凝浇注无压烧结的方法制备了Li2O-Al2O3-SiO2 玻璃陶瓷阻抗变换层,研究表明烧结的工艺方法和参数对该玻璃陶瓷的致密度和复介电常数有很大的影响。在较高烧结温度和压力下,该玻璃陶瓷的复介电常数保持不变。降低烧结温度和压力时,能够得到一系列复介电常数在较小范围内变化的Li2O-Al2O3-SiO2 玻璃陶瓷,但复介电常数不随频率发生变化。将该玻璃陶瓷作为吸波材料的阻抗变换层后,大幅度提高了材料的吸波性能,而且其制备工艺对吸波性能也有一定的影响,可以通过改变该玻璃陶瓷的烧结条件来满足不同吸波材料设计对阻抗匹配层的多种要求。 相似文献
117.
GAO Jian-xin XU Xiao-feng SONG Ke-xing LI Pei-quan GUO Xiu-hua LIU Rui-hua 《中国航空学报》2006,19(B12):36-40
Alumina dispersion strengthened copper composite (nano-Al2O3/Cu composite) was recently emerged as a kind of potentially viable and attractive engineering material for applications requiring high strength, high thermal and electrical conductivities and resistance to softening at elevated temperatures. The nano-Al2O3/Cu composite was produced by internal oxidation. The microstructures of the composite were analyzed by the TEM and its hot deformation behavior was investigated by means of continuous compression tests performed on a Gleeble 1500 thermo-simulator. Making use of the modified algorithm-Levenberg-Marquardt (L-M) algorithm BP neural network, a model for predicting the flow stresses during hot deformation was set up on the base of the experimental data. Results show that the microstructures of the composite are characterized by uniform distribution of nano-Al2O3 particles in Cu-matrix. The sliding of dislocations is the main deformation mechanism. The dynamic recovery is the main softening mode with the flow stress decreasing gently from 500℃ to 850 ~C. The recrystallization of Cu-matrix can be retarded late into as high as 850 ℃, when it happens only partially. The well-trained BP neural network model can accurately describe the influence of the temperature, strain rate, and true strain on the flow stresses, therefore, it can precisely predict the flow stresses of the composite under given deforming conditions and provide a new way to optimize hot deforming process parameters. 相似文献
118.
ZHU Dong-mei LUO Fa XIONG Liang-ming ZHOU Wan-cheng 《中国航空学报》2006,19(B12):102-105
BaO-La2O3-B2O3 (BLB) glass, suitable to be used as a sealing between metals, was chosen to be the binder in preparing glass coats on the Ti-alloy substrate. The SiCN nano-powder was introduced as the filler for the absorbing coat because it is considered to be a good high temperature absorber. The effect of the coating temperature and coating time on the tensile strength of the glass coat was investigated and the proper coating parameters to get good mechanical properties were determined. In addition, the effects of the SiCN content on the tensile strength of the absorbing coat were also discussed. Results show that it is possible to prepare the glass coat using the BLB glass as a binder. That the coat formed at 730℃ for 30 min has the best tensile strength witnesses 730 ℃, 30 min to be the proper parameter to prepare the glass coat. The BLB glass coat without SiCN powder possesses good tensile strength and the introduction of the SiCN absorber into the glass coat will lower the tensile strength. As the SiCN content increases, the tensile strength of the absorbing coat decreases, which could be attributed to the aggregation of SiCN in the coats. 相似文献
119.
120.
曾晓梅%刘红林%李铁虎 《宇航材料工艺》2006,36(Z1):70-72
采用基体改性的方法,向AlCl3溶胶中添加ZrO2粉,制得含ZrO2的C/Al2O3复合材料,探讨了添加ZrO2对C/Al2O3多功能复合材料性能的影响.结果表明添加少量的ZrO2,可产生基体的相变及在基体内产生微裂纹,这可改善C/Al2O3陶瓷基体间界面性能,提高材料强度,降低材料热导率.同时对ZrO2添加量进行了优化处理,最终确定ZrO2的最佳含量为1%(质量分数),使材料强度值提高39%,材料热导率降低至0.902 W/(m·K)以下. 相似文献