民机结构细节疲劳敏感性分析（力学参量部分）

研究了力学量（Smax、DFR、K1）对结构细节疲劳性能的影响：给出了可甩于初步设计的分析曲线和相关结论。     

高速飞行器壁板颤振分析的研究进展

壁板颤振是壁板结构在高速气流中发生的一种自激振动现象，特别是超音速和高超音速飞行器上特别容易发生这种现象。壁板颤振引发的非线性振动将对高速飞行器结构的疲劳强度、飞行性能和飞行安全带来不利的影响。随着高速飞行器研发工作的开展，壁板颤振问题将得到越来越多的重视。根据目前国内外高速飞行器壁板颤振的研究现状，介绍了壁板颤振的六种分析模型并从结构理论和气动力理论出发详述了这种分类的依据。阐述了温度、气流偏角、壁板几何尺寸及边界条件对壁板颤振的影响规律。并介绍了目前用于分析壁板颤振问题的频域和时域方法并总结了各种分析方法的优缺点。最后归纳了目前对高速飞行器壁板颤振研究得出的几个重要结论，提出了今后在高速飞行器壁板颤振研究中需要解决的若干问题。     

30CrMnSiA钢的真空热处理

真空热处理是金属材料热处理领域的新技术。本文将30CrMnSiA钢采用真空炉、空气炉、盐溶炉热处理，对其组织性能进行对比分析。结果表明:30CrMnSiA钢经过真空热处理，其综合力学性能尤其是弯曲疲劳强度大幅度提高。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

基于MEMS IMU的舵面运动测量仪

针对飞行器升降舵、副翼角运动的测试需求,提出了单轴捷联姿态系统的原理及算法,介绍了基于MEMS陀螺仪和加速度计的舵面运动测量仪的构成,并对测量仪的工作过程进行了仿真.仿真表明,测量仪的性能满足舵面运动测量的需要.     

多层喷射沉积制备大尺寸耐热铝合金管坯的研究

采用多层喷射沉积工艺制备出了尺寸为Ф630 mm×250 mm×800 mm且质量较好的FVS0812耐热铝合金管坯,通过挤压获得了性能优良的大直径管材,并对管坯和挤压后管材的力学性能和微观结构进行了检测和分析.分析结果表明,多层喷射沉积制坯过程中,熔滴在沉积面的冷却速度约3.2×104 K@s-1～106K@s-1,熔滴凝固后在沉积坯中形成微细晶粒结构(200 nm～500 nm)和弥散分布的纳米析出相Al12(Fe,V)3Si(20nm～60 nm),使得沉积坯挤压致密后具有优异的性能.     

添加剂含量对二硅化钼发热体抗氧化性能的影响研究

研究了添加剂含量对MoSi2发热体性能的影响,使用SEM观察各种添加剂含量试样的微观组织,测定各种添加剂含量试样的氧化动力学曲线、致密度、烧损温度。