A novel control method for turboshaft engine with variable rotor speed based on the Ngdot estimator through LQG/LTR and rotor predicted torque feedforward

In order to compensate for the disturbance of wide variation in rotor demanded torque on power turbine speed and realize the fast response control of turboshaft engine during variable rotor speed, a cascade PID control method based on the acceleration estimator of gas turbine speed (Ngdot) and rotor predicted torque feedforward is proposed. Firstly, a two-speed Dual Clutch Transmission (DCT) model is applied in the integrated rotor/turboshaft engine system to achieve variable rotor speed. Then, an online estimation method of Ngdot based on the Linear Quadratic Gaussian with Loop Transfer Recovery (LQG/LTR) is proposed for power turbine speed cascade control. Finally, according to the cascade PID controller based on Ngdot estimator, a rotor demanded torque predicted method based on the Min-batch Gradient Descent-Neural Network (MGD-NN) is put forward to compromise the influence of rotor torque interference. The simulation results show that compared with cascade PID controller based on Ngdot estimator and the one combined with collective pitch feedforward control, the novel control method proposed can reduce the overshoot of power turbine speed by more than 20%, which possesses faster response, superior dynamic effect and satisfactory robustness performance. The control method proposed can realize the fast response control of turboshaft engine with variable rotor speed better.     

基于WENO-分段线性格式的旋翼流场数值模拟

为了降低二阶JST(Jameson-schmidt-turkel)格式导致的数值耗散,发展了一套适合于格心格式的基于加权本质无振荡(Weighted essentially non-oscillatory,WENO)-分段线性格式的旋翼流场数值模拟方法。采用运动嵌套网格方法生成围绕旋翼的网格系统,主控方程选择Navier-Stokes(N-S)方程。为了更加有效地对桨尖涡等流动细节进行捕捉,在笛卡尔背景网格上采用七阶Roe-WENO格式计算对流通量;在桨叶贴体非结构网格上采用二阶精度的Roe-分段线性格式计算对流通量。时间离散采用了高效的双时间隐式LU-SGS(Lower upper symmetric Gauss-Seidel)方法进行时间推进。最后,应用上述方法对悬停状态的C-T(Caradonna-tung)旋翼和Helishape 7A旋翼进行了数值模拟,将数值计算结果与实验数据进行了对比,计算值与实验值吻合较好;并将桨尖涡模拟效果与二阶JST格式的模拟效果进行了对比。对比结果表明:本文方法能有效对旋翼流场进行计算,且在相同计算条件下,WENO-分段线性格式能够更有效地捕捉旋翼涡流场的流动特性,表明在计算旋翼涡流场时WENO-分段线性格式相比传统二阶JST格式具有更低的数值耗散。     

Numerical study on flow fields and aerodynamics of tilt rotor aircraft in conversion mode based on embedded grid and actuator model

A method combining rotor actuator disk model and embedded grid technique is presented in this paper, aimed at predicting the flow fields and aerodynamic characteristics of tilt rotor aircraft in conversion mode more efficiently and effectively. In this method, rotor's influence is considered in terms of the momentum it impacts to the fluid around it; transformation matrixes among different coordinate systems are deduced to extend actuator method's utility to conversion mode flow fields' calculation. Meanwhile, an embedded grid system is designed, in which grids generated around fuselage and actuator disk are regarded as background grid and minor grid respectively, and a new method is presented for ‘donor searching' and ‘hole cutting' during grid assembling. Based on the above methods, flow fields of tilt rotor aircraft in conversion mode are simulated, with threedimensional Navier–Stokes equations discretized by a second-order upwind finite-volume scheme and an implicit lower–upper symmetric Gauss–Seidel(LU-SGS) time-stepping scheme. Numerical results demonstrate that the proposed CFD method is very effective in simulating the conversion mode flow fields of tilt rotor aircraft.     

热和离心力作用下高压涡轮转子的径向变形

热和离心力变化是引起燃气轮机高压涡轮叶顶间隙变化的重要因素,也是转子设计和强度计算中考虑的基本点之一.为了便于进一步研究叶顶间隙变化规律及对轮盘和叶片进行强度计算,本文建立了在热和离心力作用下燃气轮机高压涡轮转子的径向变形模型.定性分析和定量计算了不同工况下热和离心力分别对叶片、轮盘径向变形的影响,以及两者共同作用下的...     

桨叶结冰对尾桨气动性能的影响

基于某直升机尾桨桨叶地面结冰试验数据,建立了结冰桨叶的气动计算模型。对NACA0012翼型的气动特性计算表明,翼型升力系数和阻力系数的计算结果与试验数据吻合良好。然后根据所建模型,利用Fluent软件分别计算了某尾桨桨叶翼型结冰前后剖面的气动特性,发现结冰使桨叶翼型升力系数降低,阻力系数增大。最后采用动量一叶素理论结合...     

转子振动故障的过程功率谱熵特征分析与定量诊断

针对传统旋转机械振动故障定性诊断的不足,提出了1种以信息熵理论为基础的转子故障特征分析与定量诊断方法。在转子试验台上模拟转子振动的4种典型故障,分别得到4个测点多转速下的振动过程故障数据;对这些故障数据进行分析和处理,提取反映其振动过程的故障特征——功率谱信息熵,建立能描述转子振动过程变化规律的多转速多测点下的故障信息熵矩阵,并对振动故障进行分析;通过对转子振动故障信号的实例计算和定量诊断分析,验证了该方法在转子振动故障分类和故障严重程度判断方面是可行的。     

斜置尾桨对直升机飞行特性的影响

基于叶素理论建立了斜置尾桨的数学模型,以UH-60A直升机为对象,计算了平飞配平特性,并与试飞结果进行对比,完成了对模型的验证。验证结果表明,所建的斜置尾桨模型合理准确,能满足工程精度。本文从直升机悬停需用功率研究了尾桨斜置角的设计,计算了不同尾桨斜置角对直升机悬停需用功率的影响,得出UH-60A直升机的尾桨斜置角优化值为20~25°。通过计算和对比斜置尾桨与常规尾桨直升机的平飞配平特性,得出尾桨斜置主要影响直升机的纵向配平特性。最后,对斜置尾桨的利与弊进行了一些讨论。     

六转子微型飞行器及其低雷诺数下的旋翼气动性能仿真

提出了一种新结构的六转子无人飞行器的概念,该飞行器可以在空间任意方向飞行,甚至可以在地面上滚动前进。分析了其可能的三种构型并给出了各自的运动方程,给出了三轴解耦时该飞行器的配置方式及转子空间位置。由于该飞行器具有小尺寸外形、低重量和飞行速度慢的特点,根据转子速度、弦长和飞行模态,计算得该飞行器的雷诺数变化范围为1×104到12.8×104。以选用的Eppler 387翼型作为分析对象,采用正投影混合网格方法对其在低雷诺数下的气动性能进行研究,得到了雷诺数分别为1×104,2×104,3×104和6×104下对应不同迎角的升力系数、阻力系数和升阻比,并对雷诺数为6×104下的升力系数仿真结果同试验结果进行了对比,二者具有较好的一致性。制作了六转子微型飞行器样机,实现了垂直起降及慢速前飞。     

高前进比旋翼气动特性分析方法研究

提出一种前进比高达0.8的旋翼气动特性分析方法,该方法针对高前进比旋翼前行桨叶压缩性、后行桨叶失速效应严重以及桨叶偏流作用和反流区大的特点,建立了旋翼气动力模型以及与之相适应的旋翼诱导速度时变非均布模型与桨叶非定常挥舞运动模型,然后根据高前进比旋翼气动力、旋翼诱导速度和桨叶挥舞运动三者之间的内在耦合关系提出了高前进比旋翼气动特性的动态响应计算方法,最后以H-34旋翼为例计算了该旋翼高前进比状态的气动特性,并将计算结果与风洞试验数据进行对比验证,结果合理。     

应用多块对接结构网格方法的直升机涵道尾桨气动特性分析

基于湍流Navier-Stokes方程,建立了一套直升机涵道尾桨流场及气动特性的CFD分析方法.在该方法中,针对直升机涵道尾桨流场的特点以及动量源方法对网格系统的要求,提出了一种多块对接网格生成方法,分块贴体网格采用求解Poisson方程的方法生成.通过结合涵道尾桨的运动方式、几何特征及气动特征,建立一个包含动量源项的N-S方程的涵道尾桨流场计算方法和迭代流程;为较好地捕捉涵道壁附近存在的旋涡及分离现象,采用了一方程S-A湍流模型.通过对ONERA M6机翼的绕流特性的计算分析,以及对涵道尾桨在悬停状态下的拉力、诱导速度、载荷分布等的计算分析,验证了该CFD方法的有效性.在此基础上,采用该方法进行直升机悬停、侧飞和前飞状态下涵道尾桨流场与气动特性的数值分析,得到了关于涵道尾桨流场和气动特性的一些有意义的结论.