双层涂层复合材料的介电性能

在涤纶基布上分别进行铁氧体/碳化硅、碳化硅/石墨双层复合涂层整理,制备两种双层涂层柔性复合材料.分别研究吸波剂含量对复合材料介电常数实部、虚部、损耗角正切的影响.鉴于该材料多用于工程领域,测试了该复合材料的机械性能.结果表明,该复合材料在低频范围内具备良好的介电性能,且具备一定的力学性能.     

正激变换器脉冲变压器的优化设计

以正激变换器为例讨论了电路拓扑（磁复位绕组电路和有源箝位电路）和铁心材料（铁氧体，超微晶）两个因素对变压器体积，重量和损耗的影响。研究结果表明，有源箍位正激变换器对正激变压器体积的减小，重量的减轻和效率的提高有着明显的作用。超微晶材料在一定的工作频率范围内可以减小变压器的体积，重量和损耗，是一种优良的新型磁性材料。     

铁氧体基片微带线的谱域导抗法分析

铁氧体薄膜器件在微波和毫米波集成中有着广泛地应用。本文首次将T.Itoh提出的谱域导抗法的分析推广到铁氧体基片微带线结构。通过对麦克斯韦方程的坐标旋转和傅里叶变换,导出铁氧体介质的波导纳,利用边界条件,忽略TE和TM波的耦合后,用一网络等效表示铁氧体基片微带线,从而借助于谱域导抗法进行特性分析。本文对铁氧体基片微带线的色散特性进行了数值计算,并讨论了微带线的各种参数对色散特性的影响。     

Effect of Sintering Conditions on Structure of Manganese Zinc Ferrite Powders

The structures of the Mn-Zn ferrites synthesized under different sintering conditions by the sol-gel method were investigated by the X-ray diffraction （XRD） and the scanning electron microscopy （SEM） with focus on two factors： the pre-sintering treatment and the calcining time. The results show that the sintering conditions have significant effects on the structures and the particle size of the Mn-Zn ferrites. Compared with the products without pre-sintering, those pre-sintered at 500℃ have a single phase and no diffraction peaks of Fe2O3 that could be found. The effects of the pre-sintering temperature on the structures of the ferrites were also studied. As a result, 500℃ proves to be the favorite in the pre-sintering treatment. The XRD patterns of the ferrites calcined at 1 200℃ for 6 h will present diffraction peaks of pure crystallization of spinel phase while those for 2 h or 4 h will show peaks of Fe2O3. The SEM also bears witness to well-grown grains of pure Mn-Zn ferrites if calcined for 6 hours.     

Effect of Sintering Conditions on Structure of Manganese Zinc Ferrite Powders

The structures of the Mn-Zn ferrites synthesized under different sintering conditions by the sol-gel method were investigated by the X-ray diffraction (XRD) and the scanning electron microscopy (SEM) with focus on two factors: the pre-sintering treatment and the calcining time. The results show that the sintering conditions have significant effects on the structures and the particle size of the Mn-Zn ferrites. Compared with the products without pre-sintering, those pre-sintered at 500 ℃ have a single phase and no diffraction peaks of Fe2O3 that could be found. The effects of the pre-sintering temperature on the structures of the ferrites were also studied. As a result, 500 ℃ proves to be the favorite in the pre-sintering treatment. The XRD patterns of the ferrites calcined at 1 200 ℃ for 6 h will present diffraction peaks of pure crystallization of spinel phase while those for 2 h or 4 h will show peaks of Fe2O3. The SEM also bears witness to well-grown grains of pure Mn-Zn ferrites if calcined for 6 hours.     

滤波器的设计与安装

分离信号，抑制干扰是滤波器的基本功能，要把电源线的传导干扰电平控制在标准规定的极限值内，安装电磁干扰滤波器是一种有效的办法。本文介绍了电源线滤波器的设计方法和安装要求，并对滤波器插入损耗的测试问题进行了探讨。     

Preparation and Characterization of Fe3O4/T-ZnOw Composites

Fe3O4/T-ZnOw composites are fabricated by depositing a layer of Fe3O4 film on the surface of tetrapod-shaped ZnO whisker (T-ZnOw) by ferrite plating method. The morphology, structure and magnetic properties of the composites are characterized by scanning electron microscopy (SEM), X-ray diffractometer (XRD) and vibrating-sample magnetometer (VSM), respectively. The effects of temperature and pH value of ferrite plating on the Fe3O4/T-ZnOw composites and the magnetic properties of composites are studied. It is shown that the chemical environment with pH value at 7.5 is most favorable for the ferrite plating processes by analyzing the main peaks intensity of Fe3O4 in the XRD patterns and the average diameters of the Fe3O4 crystalline. The increase of the ferrite plating temperature with pH value around 7.5 benefits the whole encapsulation of T-ZnOw by the Fe3O4 magnetic films. The composites exhibit ferromagnetic properties and show much lower magnetization intensity than bulk samples at the same magnetic field intensity.     

纳米钡铁氧体吸波材料的研究进展

介绍了纳米钡铁氧体的制备方法与吸波性能,结合最新文献论述了离子掺杂纳米钡铁氧体、稀土掺杂纳米钡铁氧体、纳米钡铁氧体复合材料的研究进展,讨论了纳米钡铁氧体吸波材料目前存在的问题及改进措施.     

钕掺杂镍锌铁氧体-聚苯胺复合材料的制备

通过sol-gel自蔓延燃烧制备Ni0,7),Zn(0,3)NdxFe(2x)(x=0.05,0.10,0.15,0.20,0.25)铁氧体,并在盐酸水溶液中以盐酸为掺杂剂,过硫酸铵为氧化剂,通过原位溶液聚合反应制备了不同聚苯胺含量的,具有导电和导磁性质的钕掺杂镍锌铁氧体-聚苯胺复合材料.X射线衍射分析揭示了钕含量的变...     

Effect of lap surface profile on lapping efficiency

Ｗｉｔｈｔｈｅｄｅｖｅｌｏｐｍｅｎｔａｎｄｐｒｏｇｒｅｓｓｉｎｍａｎ－ｕｆａｃｔｕｒｉｎｇｔｅｃｈｎｏｌｏｇｙ，ｕｌｔｒａ－ｐｒｅｃｉｓｉｏｎｍａｃｈｉｎｉｎｇｂｅｃｏｍｅｓａｎｉｎｔｅｒｅｓｔｉｎｇｓｕｂｊｅｃｔ，ａｎｄｔｈｅｒｅａｒｅｍａｎｙｒｅ...