卫星用两种单相流体回路方案对比研究

单相流体回路系统是航天器主动热控技术中的一种重要方式。文章概述了流体回路的工作原理及理论基础，总结了单相流体回路的设计思路，结合某卫星型号，设计了两种流体回路方案，在SINDA／FLUINT中建立数值仿真模型进行分析计算，并比较了两种方案的应用性能。结果显示，将单相流体回路系统应用于卫星，可取得较好的控温效果。     

基于单片机的多点温度采集系统设计

随着单片机技术的迅速兴起与蓬勃发展,其稳定、安全、高效、经济等优点十分突出。为了实现多点温度数据的精确采集,采用了一种基于单片机AT89C52为核心的数据采集系统,该系统具有电路简单、功耗低、抗干扰能力强、可靠性高等优点,能够通过DBW热电阻变送器对热电阻随温度的变化而得到的模拟信号进行采集,并通过A/D转换器对模拟信号进行模数转换;同时实现基本的人机对话功能,包括使用按键设定温度报警阀值,通过LED数码直读显示检测点、温度等功能。其温度测量精度可达到1℃。     

Integrity of sulfur concrete subjected to simulated lunar temperature cycles

In view of potential application as a construction material on the lunar surface the mechanical integrity of sulfur concrete was evaluated after being subjected to simulated temperature cycles. Here, small cubes of sulfur concrete were repeatedly cycled between room (20 °C) and liquid nitrogen (−191 °C) temperatures after which they, and non-cycled cubes, were evaluated by compression testing. The compression strength of the non-cycled samples averaged ∼35 MPa (5076 psi) before failing whereas the cycled samples fractured at about 7 MPa (1015 psi). Microscopic examination of the fracture surfaces from the cycled samples showed clear de-bonding of the sulfur from the aggregate whereas it was seen adhering in those non-cycled. Based on a simple analysis it was concluded that the large strength discrepancy between cycled and non-cycled samples is due to differences between the coefficients of thermal expansion of the materials constituting the concrete.     

温度翘曲应力对机场刚性道面寿命的影响

分析了目前中国民航机场刚性道面的设计过程,指出在设计过程中忽视温度应力的影响不合理。参照公路水泥混凝土路面温度应力计算方法并根据Miner定律研究了温度翘曲疲劳损耗对于机场刚性道面影响规律,即温度翘曲疲劳损耗随板厚、地基反应模量的增大而增大,随着混凝土设计强度的增加而降低。然后提出采用设计寿命的影响因子nt/Nt评价温度翘曲疲劳损耗对于机场刚性道面设计寿命影响的方法并提供了相应的机场刚性道面板厚度设计流程图。最后提供了一个考虑温度翘曲应力的刚性道面设计实例,为工程应用提供参考。     

An equivalent ground thermal test method for single-phase fluid loop space radiator

Thermal vacuum test is widely used for the ground validation of spacecraft thermal control system. However, the conduction and convection can be simulated in normal ground pressure environment completely. By the employment of pumped fluid loops’ thermal control technology on spacecraft, conduction and convection become the main heat transfer behavior between radiator and inside cabin. As long as the heat transfer behavior between radiator and outer space can be equivalently simulated in normal pressure, the thermal vacuum test can be substituted by the normal ground pressure thermal test. In this paper, an equivalent normal pressure thermal test method for the spacecraft single-phase fluid loop radiator is proposed. The heat radiation between radiator and outer space has been equivalently simulated by combination of a group of refrigerators and thermal electrical cooler(TEC) array. By adjusting the heat rejection of each device, the relationship between heat flux and surface temperature of the radiator can be maintained. To verify this method,a validating system has been built up and the experiments have been carried out. The results indicate that the proposed equivalent ground thermal test method can simulate the heat rejection performance of radiator correctly and the temperature error between in-orbit theory value and experiment result of the radiator is less than 0.5 C, except for the equipment startup period. This provides a potential method for the thermal test of space systems especially for extra-large spacecraft which employs single-phase fluid loop radiator as thermal control approach.     

7150铝合金热变形行为及微观组织

采用Gleeble热模拟机进行热压缩实验,研究7150铝合金在变形温度为300~450℃、应变速率为0.01~10s-1条件下的变形行为,采用Zener-Hollomon参数法构建合金高温塑性变形本构方程,并对变形后的微观组织进行分析。研究表明:7150铝合金的流变应力随应变速率增大而增大,随变形温度增大而降低。该合金热压缩变形的流变应力行为可用双曲正弦形式的本构方程描述,其参数A为4.161×1014s-1,α为0.01956 MPa-1,n为5.14336,热变形激活能Q为229.7531k J/mol。随着温度升高和应变速率降低,动态再结晶逐渐取代动态回复成为合金的主要软化机制。     

太阳能热推进系统效率分析

太阳能热推进采用小分子量气体作为推进剂可以获取800～900 s高比冲,但提高推进系统的换热效率是目前亟待解决的问题.本研究建立了太阳能热推进系统主要部件的基本分析模型,在利用有限单元法进行热分析的基础上,对系统在多种工况下的相关参数进行了计算,分析了各部件主要参数对提高太阳能热推进系统热效率和推进效率的影响,得出了系统效率在不同工作状态下的变化规律,并提出了提高系统效率的措施.     

星外管路多层隔热组件热参数确定方法

提出了利用整星热平衡试验数据确定星外管路多层组件热参数的方法,解决了以往星外管路热设计在地面热试验验证不充分的难题。以某卫星星外管路为例,通过对星外管路试验状态模型的修正,确定了星外管路多层隔热组件热参数,并分析了星外管路的在轨极端温度。根据确定的星外管路多层隔热组件热参数计算出的星外管路温度,与在轨温度数据符合较好,验证了此方法的有效性。     

倾斜轨道星敏感器热控设计及在轨分析

倾斜轨道卫星星敏感器空间外热流复杂多变,同时兼具内功率集中、热容小等特点,这为星敏感器的热设计带来了很大的困难。文章以某临界倾角轨道卫星星敏感器热设计为背景,在详细外热流分析的基础上,提出了一种倾斜轨道星敏感器热设计方案,利用热分析软件Thermal Desktop对此热控系统进行了具体的热分析。星敏感器在轨遥测温度在-19.8^-5.1℃之间,满足温度指标要求,表明星敏感器热设计合理、有效,可为今后倾斜轨道星敏感器热设计提供设计依据。在此基础上,文章利用在轨遥测数据对星敏感器热分析模型进行修正,得出入轨初期星表主要热控涂层退化约为50%的结果,这对于分析近地轨道卫星在轨温度具有一定的参考意义。     

HFC134a喷雾闪蒸冷却换热特性的实验研究

喷雾闪蒸冷却由于可以在较小的工质流量下实现很高的散热能力,在高热流密度散热、航天器热控和热防护等领域具有广阔的应用前景。本文建立了喷雾闪蒸冷却实验系统,对环境压力下以HFC134a为工质的喷雾闪蒸冷却换热特性进行了实验研究,得出了喷雾闪蒸冷却的换热特性曲线、临界热流密度(critical heat flux,CHF)以及被冷却表面温度随喷雾高度和流量的变化曲线,分析了适用于热控的最佳喷雾高度和流量。