极区中层惯性重力波VHF雷达观测的统计特征

本文采用ＳＯＵＳＹＶＨＦ雷达１９８７年６月２２日至６月２９日在挪威Ａｎｄφｙａ（６９°Ｎ，１０°Ｅ）的观测数据，研究中层惯性重力波传播的统计特征．２１个周期为数小时的准单色波例子，在垂直方向上有确定的相位移动，表明它们是惯性内重力波．通过分析波相关水平扰动速度的矢端曲线，获得了水平传播矢量的大小和方向的分布，大多数（７６％）波具有西向传播的波矢分量，似乎与中层顶具有强的西向背景风有关；水平传播速度的大小与中层高度上典型的观测值一致．本文分析结果还表明在极区中不仅存在向上的能量传输，也存在强烈的向下的能量传输．     

An energy-based coupling degradation propagation model and its application to aviation actuation system

The degradation of components in complex mechatronic systems involves multiple physical processes which will cause coupling interactions among nodes in the system. The interaction of nodes may be carried out not only by physical connections but also by the environment which cannot be described by single network using the traditional methods. In order to give out a unified model to quantitatively describe the coupling degradation spreading by both physical connections and environment, a novel Energy-Flow-Field Network (EFFN) and a coupling degradation model based on EFFN are proposed in this paper. The EFFN is driven by energy flow and the state transition of spatially related nodes is triggered by the dissipation energy. An application is conducted on aviation actuation system in which the degradation spreading by fluid-thermal-solid interaction is considered. The degradation path and the most probable fault reason can be obtained by combining the state transition and energy output of nodes, which is consistent with the given scenario.     

Sound insulation performance of plates with interconnected distributed piezoelectric patches

This paper deals with the sound insulation performance of a thin plate with intercon-nected distributed piezoelectric patches. Piezoelectric patches are periodically bonded on the sur-faces of the plate in a collocated fashion, and are interconnected via an inductive circuit network. This piezoelectric system is termed as piezo-electromechanical (PEM) plate in the paper. Homogenization methods are involved under a sub-wavelength assumption to analytically develop the dynamical equations for the PEM plate. The dispersion relationships and energy densities of the wave modes propagating in the PEM plate are studied;the sub-wavelength assumption is verified for the simulations in this paper. The coincidence frequency of the PEM plate is researched, and results show that the coincidence frequency of the PEM plate will disappear at certain circum-stances;mathematical and physical explanations are made for this phenomenon. The disappearance of the coincidence frequency is used to optimize the value of inductance, for the purpose of improv-ing the sound transmission loss of the PEM plate.     

均匀各向同性大气湍流对声爆传播特性的影响

基于离散Fourier模态有限和生成的随机大气湍流场，采用修正波形参数方法，开展了均匀各向同性大气湍流对典型超声速客机声爆传播特性的影响分析。计算采用的超声速客机模型为自行生成的简化超声速公务机模型。首先，应用航空工业空气动力研究院自主研制的CFD软件ARI_Overset在三维空间求解Navier-Stokes方程，得到作为声爆远场传播初始值的近场空间压力分布；其次，基于Von Karman能量谱，采用离散Fourier模态有限和形式生成随机均匀各向同性大气湍流场；最后，采用修正波形参数方法模拟了声爆信号在随机速度湍流场中的传播过程。数值结果表明：各向同性大气湍流对于地面声爆特征有重要影响。与无湍流状态相比，均匀各向同性大气湍流使得地面声爆特征增强的概率约为55%，使得地面声爆特征减弱的概率约为45%，故总体而言大气湍流效应更倾向于增强地面声爆特征；均匀各向同性大气湍流对于声爆传播路径影响相对较小，但是这一变化仍会导致地面信号接收点的不确定性。     

等离子鞘套热力学波动对电磁波传播的影响

针对等离子鞘套热力学波动造成电磁波传播特性变化的问题，结合湍流理论、等离子理论和电磁波传播理论，得到了热力学参数波动与介电常数间的关系。计算了不同状态下热力学参数波动引起S和Ka波段电磁波透射和反射系数的变化。结果表明，当电子密度增大，S波段反射系数变化减小、透射系数变化增大；当Ka波段在碰撞频率10MHz时，反射系数变化增大、透射系数变化减小，在碰撞频率1GHz和50GHz时透射系数变化反射系数变化先增后减。不同高度下波动的影响也不同，S波段透射和反射系数变化随高度升高先减后增；Ka波段透射系数变化先减后增、反射系数变化先减后增而后再次减小。因此，应根据实际环境状态获得波动的包络范围，进而针对性开展测控通信系统设计。     

基于MBD的飞机装配工装协同变更方法

装配工装在飞机产品生产过程中处于飞机设计的下游,受到飞机装配件设计及其装配工艺的影响以及飞机生产准备周期限制,时间紧迫,任务繁重。传统的飞机装配工装以文本、二维图形式表达为主,信息是静态的,缺乏唯一的数据源易导致飞机-装配工装协同变更管理效率低、准确性差,针对以上问题提出一种飞机-装配工装协同变更方法:利用基于模型的定义(Model based definition,MBD),建立了飞机和装配工装MBD模型关系架构,并结合相关的变更传播计算方法实现了飞机设计结构变更对装配工装变更影响的主动、自动化预测和分析。通过一套飞机壁板开口加强框的装配工装变更设计实例验证了该方法的可行性。     

基于损伤检测的飞机结构腐蚀损伤预测方法对比研究

针对飞机结构材料易腐蚀特点,采用 BP 神经网络算法、数据拟合方法、指数平滑预测三种方法,对飞机铝合金结构腐蚀损伤进行预测对比分析。预测结果及其误差以及对比分析图表明,BP 神经网络算法所构建的网络预测模型对一定腐蚀周期内的腐蚀损伤有较好预测能力,指数平滑预测方法和幂函数数据拟合方法对一定腐蚀周期之外的腐蚀损伤预测有较好的外延性。     

基于断口分析的钛合金轮内部缺陷损伤容限

为进行某轮损伤容限设计,开展了裂纹扩展断口分析和仿真分析研究。由断口分析可知:疲劳源为一处内部自然缺陷;依据疲劳辉纹确定了裂纹扩展速率;在裂纹长度为2 mm附近,裂纹扩展速率明显增大,为第一、第二加载阶段转换区域;裂纹稳定扩展区裂纹长度与裂纹扩展速率呈双对数线性关系;应用列表梯度法和Paris公式法反推了第二加载阶段的疲劳寿命,与该阶段实际循环次数的最大误差是163%。裂纹稳定扩展阶段裂纹扩展仿真值与断口反推值吻合;非稳定扩展阶段仿真值与断口反推值的最大误差为-215%;基于以上研究,合理确定了某离心轮内部裂纹表面扩展停机检测周期。该类轮非稳定、失稳扩展阶段寿命占内部裂纹表面扩展阶段寿命的比例达248%~357%,因此准确计算具有重要意义。     

Investigation of dynamics of discrete framed structures by a numerical wave-based method and an analytical homogenization approach

In this article, the analytical homogenization method of periodic discrete media (HPDM) and the numerical condensed wave finite element method (CWFEM) are employed to study the lon-gitudinal and transverse vibrations of framed structures. The valid frequency range of the HPDM is re-evaluated using the wave propagation feature identified by the CWFEM. The relative error of the wavenumber by the HPDM compared to that by the CWFEM is illustrated in functions of fre-quency and scale ratio. A parametric study on the thickness of the structure is carried out where the dispersion relation and the relative error are given for three different thicknesses. The dynamics of a finite structure such as natural frequency and forced response are also investigated using the HPDM and the CWFEM.     

钉头型式对复合材料层合板机械连接强度的影响

通过3种不同铺层比例的复合材料层合板机械连接接头的挤压强度测试，研究了钉头型式对复合材料层合板机械连接挤压力学性能的影响，获得了沉头螺栓挤压强度修正系数。试验数据表明：采用沉头螺栓的复合材料机械接头 的挤压强度，可达到采用凸头螺栓的复合材料机械连接挤压强度的90%左右，但接头刚度仅为采用凸头螺栓的复合材料接头刚度的40%~50%。研究采用Hashin失效准则和Tan-Camanho损伤扩展方法，对两种钉头型式的复合材料层合板机械连接接头的挤压失效过程进行了有限元分 析，预测了复合材料层合板机械连接接头的偏移挤压强度和极限挤压强度，模型预测值与试验值的误差不超过15%。