梁式构件动力学响应分析的集总参数方法

详尽阐述了一种适用于梁式构件动力学响应分析的集总参数方法——有限段方法。采用有限段方法建立柔性梁式构件的离散模型,基于Ｋａｎｅ方程的Ｈｕｓｔｏｎ方法建立柔性多体系统动力学方程。该方程计入了梁式构件的几何非线性变形的惯性影响,在求解过程中,引入了相对位移的模态变换以提高计算效率。通过典型实验验证了有限段方法可以解决具有几何非线性变形的柔性梁式构件的多体系统动力学问题。     

基于滑模控制理论的导弹自动驾驶仪的设计

基于变结构自适应控制理论,提出一种新的STT导弹自动驾驶仪三通道独立设计方法。该方法在设计过程中保留了通道间的全部耦合因素,通过构造滑模面和最优值原理配置转换系统零动态的极点,从而提高了系统的稳定性,增强了系统的适应性和鲁棒性。运用所提出的方法,本文设计了某型导弹的自动驾驶仪,并在考虑了舵机系统,加速度计等各种非理想因素的情况下,得到了良好的输出跟踪性能和鲁棒性。     

Digital fixed-frequency hysteresis current control of a BLDC motor applied for aerospace electrically powered actuators

In the conventional cascade control structure of aerospace electrically powered actuators, the current (or electromagnetic torque) loop plays a critical role in realizing a rapid response for a digitally controlled BrushLess Direct Current (BLDC) motor. Hysteresis Current Control (HCC) is an effective method in improving the performance of current control for a BLDC motor. Nevertheless, the varying modulating frequency in the traditional HCC causes severe problems on the safety of power devices and the electromagnetic compatibility design. A triangular carrier-based fixed-frequency HCC strategy is expanded by relaxing the constraints on the rising and descending rates of the winding current to advance the capability of HCC to realize fixed-frequency modulation in the steady state. Based on that, a new flexible-bound-size quasi-fixed-frequency HCC is proposed, and the range feasible to realize fixed-frequency modulation control can cover the entire running process in the steady state. Meanwhile, a corresponding digital control strategy is designed, and four digitalization rules are proposed to extend the capacity to achieve fixed-frequency modulation control to the unsteady working state, that is, a novel fixed-frequency modulation is realized. Simulation and experimental results prove the effectiveness of this improved fixed-frequency HCC strategy.     

基于改进匈牙利算法的航空企业动态调度方法研究

航空零件生产调度时,应尽量满足多目标和实时性的要求。结合某航空制造企业的实际生产情况,提出一种基于"穷尽成对比较"技术和改进匈牙利算法的动态调度方法。首先以航空零件调度时的最大完工时间、生产加工成本以及生产能耗为优化目标,构建柔性作业车间多目标动态调度数学模型;然后利用基于"穷尽成对比较"技术的权重参数调节模型对数学模型中各个目标的权重参数进行实时动态调整;最后以各个目标的加权值为总目标,采用改进匈牙利算法求得工序的最优分配结果。结果表明:与传统的动态调度方法相比,动态调度方法能够有效地提高航空企业的生产效率、减少航空企业的生产加工成本并降低对环境的污染,具有较好的综合调度性能。     

Dynamic parametric modeling-based model updating strategy of aeroengine casings

For accurate Finite Element (FE) modeling for the structural dynamics of aeroengine casings, Parametric Modeling-based Model Updating Strategy (PM-MUS) is proposed based on efficient FE parametric modeling and model updating techniques regarding uncorrelated/correlated mode shapes. Casings structure is parametrically modeled by simplifying initial structural FE model and equivalently simulating mechanical characteristics. Uncorrelated modes between FE model and experiment are reasonably handled by adopting an objective function to recognize correct correlated modes pairs. The parametrized FE model is updated to effectively describe structural dynamic characteristics in respect of testing data. The model updating technology is firstly validated by the detailed FE model updating of one fixed–fixed beam structure in light of correlated/uncorrelated mode shapes and measured mode data. The PM-MUS is applied to the FE parametrized model updating of an aeroengine stator system (casings) which is constructed by the proposed parametric modeling approach. As revealed in this study, (A) the updated models by the proposed updating strategy and dynamic test data is accurate, and (B) the uncorrelated modes like close modes can be effectively handled and precisely identify the FE model mode associated the corresponding experimental mode, and (C) parametric modeling can enhance the dynamic modeling updating of complex structure in the accuracy of mode matching. The efforts of this study provide an efficient dynamic model updating strategy (PM-MUS) for aeroengine casings by parametric modeling and experimental test data regarding uncorrelated modes.     

基于内模原理的复杂挠性卫星姿态控制研究

首先对具有运动挠性附件的航天器的姿态动力学模型进行了简要讨论和分析,证明了对于受步进扰动的复杂挠性卫星系统,采用输出反馈PD控制仅能得到一致有界稳定的结论。为了获得闭环系统的渐近稳定性能,进一步构造了具有内模补偿的PD控制系统,并且根据Lyapunov理论给出了严格证明。基于美国GOES 8号静止轨道气象卫星公布的动力学参数,对PD控制及含有内模补偿的PD控制两类控制器进行了仿真对比,以校验所设计控制系统的有效性。最后,进行了总结并提出进一步的研究设想。     

柔性绳网动力学建模与天地差异性分析

采用有限元模型研究了柔性绳网系统的动力学特性。针对空间绳网直接弹射展开方式,首先将绳网离散为若干单元,各单元处理为非线性“半阻尼弹簧”模型,然后分别计算各单元所受气动力和重力,最终建立绳网系统多柔体动力学模型。基于所建立的动力学模型分别对柔性绳网在地面和太空展开的动力学过程进行了仿真分析,研究了绳网在展开面积、空间位形和飞行距离等方面的天地差异性及其动力学机理,为未来空间绳网系统的分析设计提供理论参考。     

Behavior of tethered debris with flexible appendages

Active exploration of the space leads to growth of a near-Earth space pollution. The frequency of the registered collisions of space debris with functional satellites highly increased during last 10 years. As a rule a large space debris can be observed from the Earth and catalogued, then it is possible to avoid collision with the active spacecraft. However every large debris is a potential source of a numerous small debris particles. To reduce debris population in the near Earth space the large debris should be removed from working orbits. The active debris removal technique is considered that intend to use a tethered orbital transfer vehicle, or a space tug attached by a tether to the space debris. This paper focuses on the dynamics of the space debris with flexible appendages. Mathematical model of the system is derived using the Lagrange formalism. Several numerical examples are presented to illustrate the mutual influence of the oscillations of flexible appendages and the oscillations of a tether. It is shown that flexible appendages can have a significant influence on the attitude motion of the space debris and the safety of the transportation process.     

Effects of uncertainties and flexible dynamic contributions on the control of a spacecraft full-coupled model

One of the most important problems for performing a good design of the spacecraft attitude control law is connected to its robustness when some uncertainty parameters are present on the inertial and/or on the elastic characteristics of a satellite. These uncertainties are generally intrinsic on the modeling of complex structures and in the case of large flexible structures they can be also attributed to secondary effects associated to the elasticity. One of the most interesting issues in modeling large flexible space structures is associated to the evaluation of the inertia tensor which in general depends not only on the geometric ‘fixed’ characteristic of the satellite but also on its elastic displacements which of course in turn modify the ‘shape’ of the satellite. Usually these terms can be considered of a second order of magnitude if compared with the ones associated to the rigid part of a structure. However the increasing demand on the dimension of satellites due to the presence for instance of very large solar arrays (necessary to generate power) and/or large antennas has the necessity to investigate their effects on their global dynamic behavior in more details as a consequence. In the present paper a methodology based on classical Lagrangian approach coupled with a standard Finite Element tool has been used to derive the full dynamic equations of an orbiting flexible satellite under the actions of gravity, gravity gradient forces and attitude control. A particular attention has been paid to the study of the effects of flexibility on the inertial terms of the spacecraft which, as well known, influence its attitude dynamic behavior. Furthermore the effects of the attitude control authority and its robustness to the uncertainties on inertial and elastic parameters has been investigated and discussed.