基于对象关系模型的C＋＋程序静态分析器

面向对象程序设计技术给软件的测试和维护来了新困难。针对这些困难，提出了用于描述程序中对象类之间三种依赖的对象关系图模型，并研究了这一模型在软件测试和维护中的两个具体应用及其相应算法，为了从特定的面向对象程度设计语言Ｃ＋＋编写的程序中提取ＯＲＤ较信息，构造了一个逆向工程工具－Ｃ＋＋程序静态分析器，并对其实现上的一些关键技术进行了介绍。     

基于参数化模型和遗传算法的复合材料加筋壁板结构选型优化研究

针对复合材料加筋壁板的结构优化选型问题,采用辅助层压板和添加极小弹性模量材料的复合材料加筋壁板有限元建模方法,应用PATRAN/NASTRAN的参数化建模功能和遗传算法相结合的复合材料加筋壁板的优化方法,对5种复合材料结构形式进行了从2000N/mm到6000N/mm压缩载荷下的结构优化分析。结果表明,当载荷小于4500N/mm时,最有效的加筋壁板结构型式为J型;当压缩载荷大于4500N/mm时,最有效的加筋壁板结构型式为I型。     

旋转弹气动力建模与飞行轨迹仿真

运用一种自回归滑动平均(ARMA)的时域气动力建模方法,以计算流体力学与刚体动力学(CFD/RBD)耦合仿真的输出结果为样本,对旋转弹的非定常气动力进行建模。利用建立的气动力模型与刚体动力学方程求解模块耦合,实现了旋转弹轨迹的快速仿真,并讨论了不同的建模方式对仿真精度的影响。算例结果表明:采用气动力模型与刚体动力学方程耦合仿真技术可以在不同初始发射条件下进行旋转弹飞行姿态与运动轨迹预测,且与CFD/RBD仿真结果吻合较好,证明ARMA气动力建模方法可以在保证旋转弹轨迹预测精度的同时大幅缩短仿真时间,节省计算资源。     

Modeling novel methodologies for unmanned aerial systems–Applications to the UAS-S4 Ehecatl and the UAS-S45 Bálaam

The rising demand for Unmanned Aerial Systems(UASs) to perform tasks in hostile environments has emphasized the need for their simulation models for the preliminary evaluations of their missions. The efficiency of the UAS model is directly related to its capacity to estimate its flight dynamics with minimum computational resources. The literature describes several techniques to estimate accurate aircraft flight dynamics. Most of them are based on system identification. This paper presents an alternative methodology to obtain complete model of the S4 and S45 unmanned aerial systems. The UAS-S4 and the UAS-S45 models were divided into four sub-models, each corresponding to a specific discipline: aerodynamics, propulsion, mass and inertia, and actuator. The‘‘aerodynamic" sub-model was built using the Fderivatives in-house code, which is an improvement of the classical DATCOM procedure. The ‘‘propulsion" sub-model was obtained by coupling a two-stroke engine model based on the ideal Otto cycle and a Blade Element Theory(BET) analysis of the propeller. The ‘‘mass and the inertia" sub-model was designed utilizing the Raymer and DATCOM methodologies. A sub-model of an actuator using servomotor characteristics was employed to complete the model. The total model was then checked by validation of each submodel with numerical and experimental data. The results indicate that the obtained model was accurate and could be used to design a flight simulator.     

AADL在航天器控制系统设计中的应用研究

以某型号航天器为例提出了一种使用体系结构分析和设计语言(AADL,architecture analysis & design language)分层次建模的方法,建立控制系统软件及软件与硬件之间的交互模型.采用状态自动机方式描述串口通信协议,以便分析模型.     

数字化技术在叶轮研制中的应用

本文通过分析归纳建立了一种叶轮数字化建模方法，并利用该方法成功实现了某型叶轮三维模型创建，同时也根据该数字化模型实现了模具数字化设计及其数控加工。     

论动机理论对大学英语教学的启示

学习动机是学习者在第二语言习得过程的诸多因素中最具能动性的因素,是推动大学生进行学习活动的动力,直接影响到大学生进行学习活动的积极性。二语习得中的动机理论给我们大学英语教学以重要启示,它将会成为大学英语教学成功与否的关键所在。     

PSO-LSSVM在民机气动性能数学建模上的应用

目前风洞试验仅为民用飞机飞行性能提供有限数据.全飞行包线的技术支持对于民机飞行试验十分重要,需要采用数学建模和参数辨识的方法.选择合适的机器学习算法是参数辨识中最为关键的一步.支持向量机(SVM)采用结构风险最小化原理,尤其适用于小样本情形.根据A320非巡航起降阶段的几组真实数据,以及全机气动力估算的结果,使用最小二乘支持向量机建立预测模型.随后采用粒子群算法优化模型参数从而提升泛化能力.由此实现民机飞行包线的气动性能整体建模与辨识.与Ma=0.78时的实验数据相比较,PSO-LSSVM模型的预测结果吻合,是一种有效的气动数学建模方法.     

地面飞行模拟器动力学建模与应用研究

地面飞行模拟器的训练效果主要取决于动力学建模的逼真度和满足正常/特殊情况飞行任务的程度。首先,分析了影响飞机动力学特性和飞行员操作各个因素的相互关系,旨在从任务飞行、故障飞行和特殊环境条件飞行三方面拓展地面飞行模拟器的模拟能力;其次,进行了飞机空中编队、方向舵故障、雨中飞行以及非线性起落架减振支柱的仿真。研究结果表明,拓展地面飞行模拟器的应用范围是实际飞行的需要且技术可行,关注细节的部件建模更是提高地面飞行模拟器逼真度和可信度的关键。     

Behavior and functional modeling methods of doubly salient electromagnetic generators for aircraft electrical power system applications

The Doubly Salient Electromagnetic Generator(DSEG) is a promising candidate in aircraft generator application due to the simplicity, robustness and reliability. However, the field windings and the armature windings are strongly coupled, which makes the inductance characteristics non-linear and too complex to model. The complex model with low precision also leads to difficulties in modeling and analysis of the entire aircraft Electrical Power System(EPS). A behavior level modeling method based on modified inductance Support Vector Machine(SVM) is proposed. The Finite Element Analysis(FEA) inductance data are modified based on the experiment results to improve the precision. A functional level modeling method based on input–output characteristics SVM is also proposed. The two modeling methods are applied to a 9 kW DSEG prototype. The steady state and transient process precision of the proposed methods are proved by comparing with the experiment results. Meanwhile, the modeling time consumption, the application time consumption and the calculation resource demand are compared. The DSEG behavior and functional modeling methods provide precious results with high efficiency, which accelerates theoretical analysis and expands the application foreground of the DSEG in the aircraft EPS.