地基激光清除椭圆轨道空间碎片特性的计算分析

空间碎片对人类航天活动的危害很大,用高能激光减缓其危害性已受到广泛关注.针对地基激光清除椭圆轨道空间碎片问题,提出了单脉冲变轨和多脉冲变轨两种计算分析方法.仿真计算结果表明,碎片初始真近角在100°～150°附近降轨效果最佳;从激光器在地球表面可供布站的区域讲,在碎片真近角180°附近,布站区域最大;当推进激光总作用时间较短或作用距离较小时,单脉冲变轨计算模型和多脉冲变轨计算模型计算结果接近,因此可采用单脉冲变轨计算模型计算结果近似表示多脉冲作用效果.     

地面模拟空间环境下磷酸盐涂层的摩擦学行为

针对有机类固体润滑防护涂层长期暴露在空间环境下涂层表面降解、致密性下降、润滑作用失效等问题,设计开发了改性磷酸盐黏结固体润滑防护涂层。通过地面模拟空间综合环境设备系统,分析了改性磷酸盐黏结固体润滑防护涂层在长时间紫外、原子氧、高能质子和电子辐照后的结构变化和真空摩擦学性能。结果表明:紫外和高能粒子辐照对改性磷酸盐黏结固体润滑涂层的力学和真空摩擦磨损性能均无影响;原子氧对涂层表面的二硫化钼具有一定的氧化作用,但并未影响涂层的摩擦磨损性能,涂层经过各种辐照后仍然表现出良好的润滑作用。该涂层有望应用于航天飞行器相关运动部件的润滑与防护。     

磁流变机床误差分析和加工工艺优化

首先通过实验分析不同工艺参数下对去除函数稳定性的影响,并进行了仿真分析,确定了机床的敏感方向;其次,对磁流变机床运动轴误差进行了测量,分析这些误差引起法线方向误差的大小;最后,实验验证采用较大的压深和补偿法线方向误差可以有效提高机床的加工精度.     

单次任务中主动清除多块碎片的仿真分析

针对国内外空间活动产生的碎片,文章采用多脉冲推力作用下的轨道机动仿真方法,在主要考虑总速度增量为2 km/s的约束条件下,计算碎片清除所需要的速度增量、任务时间以及清除个数。仿真结果表明,单次任务可以清除12块分布比较集中的碎片。研究结果可为我国今后空间碎片清扫任务的设计提供参考依据。     

A novel stability prediction approach for thin-walled component milling considering material removing process

The milling stability of thin-walled components is an important issue in the aviation manufacturing industry,which greatly limits the removal rate of a workpiece.However,for a thin-walled workpiece,the dynamic characteristics vary at different positions.In addition,the removed part also has influence on determining the modal parameters of the workpiece.Thus,the milling stability is also time-variant.In this work,in order to investigate the time variation of a workpiece's dynamic characteristics,a new computational model is firstly derived by dividing the workpiece into a removed part and a remaining part with the Ritz method.Then,an updated frequency response function is obtained by Lagrange's equation and the corresponding modal parameters are extracted.Finally,multi-mode stability lobes are plotted by the different quadrature method and its accuracy is verified by experiments.The proposed method improves the computational efficiency to predict the time-varying characteristics of a thin-walled workpiece.     

大型飞机气源起动装备供气流程设计与计算

为了研发具有自主知识产权的气源起动装备,立足于大型飞机较高压力、超大流量的特殊气源起动保障需求,设计了以双级无油螺杆压缩为核心技术的供气流程,对其中涉及的级间压力、散热量、除水量等关键参数进行了分析与计算,为解决超大流量气源的二次升压、风冷散热、高温除水等核心技术难题奠定了基础。     

Orbital debris–debris collision avoidance

We focus on preventing collisions between debris and debris, for which there is no current, effective mitigation strategy. We investigate the feasibility of using a medium-powered (5 kW) ground-based laser combined with a ground-based telescope to prevent collisions between debris objects in low-Earth orbit (LEO). The scheme utilizes photon pressure alone as a means to perturb the orbit of a debris object. Applied over multiple engagements, this alters the debris orbit sufficiently to reduce the risk of an upcoming conjunction. We employ standard assumptions for atmospheric conditions and the resulting beam propagation. Using case studies designed to represent the properties (e.g. area and mass) of the current debris population, we show that one could significantly reduce the risk of nearly half of all catastrophic collisions involving debris using only one such laser/telescope facility. We speculate on whether this could mitigate the debris fragmentation rate such that it falls below the natural debris re-entry rate due to atmospheric drag, and thus whether continuous long-term operation could entirely mitigate the Kessler syndrome in LEO, without need for relatively expensive active debris removal.     

天基激光清理低轨空间碎片的最佳角度分析与过程设计

针对天基高能脉冲激光清理低轨(LEO)空间碎片的问题,建立了高能脉冲激光清理LEO碎片作用过程和轨道演化的模型,推导了脉冲激光作用碎片的最佳角度与碎片轨道参数的解析关系,证明了最佳角度下的清理效果具有关于碎片轨道主轴对称的特性。以平台飞行时间和激光作用时间综合优化为目标,提出了一种天基激光清理空间碎片过程的简化设计方法,能快速有效地获得清理方案。选取典型的激光器与空间碎片参数进行仿真验证,结果表明:采用最佳作用角度能极大提高激光清理的效果;基于优化设计方法可使得在平台飞行时间仅增长10%情况下激光作用时间减少30%。     

Conceptualizing an economically,legally, and politically viable active debris removal option

It has become increasingly clear in recent years that the issue of space debris, particularly in low-Earth orbit, can no longer be ignored or simply mitigated. Orbital debris currently threatens safe space flight for both satellites and humans aboard the International Space Station. Additionally, orbital debris might impact Earth upon re-entry, endangering human lives and damaging the environment with toxic materials. In summary, orbital debris seriously jeopardizes the future not only of human presence in space, but also of human safety on Earth. While international efforts to mitigate the current situation and limit the creation of new debris are useful, recent studies predicting debris evolution have indicated that these will not be enough to ensure humanity?s access to and use of the near-Earth environment in the long-term. Rather, active debris removal (ADR) must be pursued if we are to continue benefiting from and conducting space activities. While the concept of ADR is not new, it has not yet been implemented. This is not just because of the technical feasibility of such a scheme, but also because of the host of economic, legal/regulatory, and political issues associated with debris remediation. The costs of ADR are not insignificant and, in today?s restrictive fiscal climate, are unlikely/to be covered by any single actor. Similarly, ADR concepts bring up many unresolved questions about liability, the protection of proprietary information, safety, and standards. In addition, because of the dual use nature of ADR technologies, any venture will necessarily require political considerations. Despite the many unanswered questions surrounding ADR, it is an endeavor worth pursuing if we are to continue relying on space activities for a variety of critical daily needs and services. Moreover, we cannot ignore the environmental implications that an unsustainable use of space will imply for life on Earth in the long run. This paper aims to explore some of these challenges and propose an economically, politically, and legally viable ADR option. Much like waste management on Earth, cleaning up space junk will likely lie somewhere between a public good and a private sector service. An international, cooperative, public-private partnership concept can address many of these issues and be economically sustainable, while also driving the creation of a proper set of regulations, standards and best practices.     

IMPROVEMENTS IN HIDDEN LINE REMOVAL ALGORITHM FOR BI-PARAMETRIC SURFACES

近些年来，随着计算机图形学，计算几何和计算机辅助设计与制造技术的发展，双参数曲面的消隐算法变得越来越重要。而现有的一些消隐算法，它们在计算量，存贮量和精度上都不太令人满意。本文引入面积坐标进行包含性检验，提出移动包围盒技术，给出了一种通用性强，贮存量小，准确性高，简单快速且易于在微机上实现的消隐算法。本文还给出了由Ｄｘｙ－８８０绘图仪绘制的多个实例效果。