基于CCFHTLS算法的异步电动机转子故障检测

定子电流经低通滤波器处理后产生高斯有色噪声,限制了异步电机转子故障检测算法的辨识精度。针对该问题,提出一种抑制高斯有色噪声的异步电机故障检测技术。首先对采集到的定子电流进行预处理,利用逆同步旋转变换剔除基波,避免了直接检测时基波对故障辨识精度的影响。然后利用互相关函数(CCF)处理技术对高斯有色噪声的抑制作用,提出基于CCFHTLS算法的电机转子故障诊断技术。针对异步电机转子断条和偏心故障的识别进行试验,结果表明CCFHTLS算法可以有效抑制高斯有色噪声,并保留故障有用信息,显著地提高了故障检测的分辨率。     

双脉冲发动机点火过程三维数值模拟

以喷射棒式双脉冲发动机燃烧室、级间隔离装置和喷管一体化为研究对象,采用数值仿真技术对Ⅱ脉冲点火过程三维流场特性进行分析研究。计算结果表明,点火初期燃气压力波峰超前于火焰峰到达级间隔离装置,并以压强冲击波形式传播,Ⅱ脉冲燃烧室相对高压区位置不断发生改变;级间孔打开过程对药柱末端压强影响较大,但对Ⅱ脉冲燃烧室压强整体上升过程影响较小;级间孔打开后,燃气经级间孔加速后形成高度欠膨胀射流,并在Ⅰ脉冲燃烧室内形成非对称带状低压区;级间孔分布的非对称性,导致压强及温度在发动机燃烧室中呈现显著的三维分布特性;高温区出现在隔板附近,而在装药前端、装药末端及外围级间孔轴线附近出现低温区。     

固体冲压发动机喷管用C/C-SiC复合材料

采用"化学气相渗透+先驱体浸渍裂解"(CVI+PIP)混合工艺制备固体冲压发动机用C/C-SiC复合材料喷管内层,综合考查复合材料的微观结构、弯曲性能和抗烧蚀性能以及固冲发动机C/C-SiC喷管内层水压和点火实验。结果表明:复合材料的弯曲强度达到197 MPa,且断裂破坏行为呈现典型的韧性模式;复合材料具有优异的抗氧化烧蚀性能,氧化烧蚀200 s后线烧蚀率仅为0.0063 mm·s-1;研制的C/C-SiC复合材料构件的水压爆破压强为6.5 MPa,表明构件具有良好的整体承载能力;C/C-SiC复合材料喷管内层高温综合性能通过了固体冲压发动机点火实验考核。     

Luenberger观测器在永磁同步电机无传感器控制中的应用研究

在永磁同步电机(PMSM)矢量控制中,根据Luenberger观测器原理,提出了一种基于Luenberger观测器的PMSM转子速度和位置的估算方法,有效解决了PMSM由于机械传感器安装带来的一些弊端。利用MATLAB/Simulink工具搭建控制系统仿真模型并进行仿真验证,仿真结果表明控制系统具有良好的控制性能。最后,在以STM32F103ZET6为控制核心的硬件系统上进行算法的实现,试验结果表明基于Luenberger观测器的PMSM控制系统具有较高的控制精度且稳定性较好。     

The role of motor processes in mental rotation: selective shaping of cognitive processing via specific sensorimotor experience

The involvement of motor processes in mental rotation is experience-dependent: different levels of expertise in sensorimotor interactions lead to different strategies in mental rotation. In the present study, wrestlers, gymnasts, and nonathletes physically rotated objects that were either light (wooden) or heavy (lead) but otherwise having the same sizes and shapes. They then performed a mental rotation task using photographs of these objects in which the material and therefore the weight was visible. I hypothesized that wrestlers would rely more heavily on experience-based sensorimotor strategies in performing mental rotation because during their athletic practice they not only manipulate external “objects” (i.e., their opponent) but also have to plan future actions taking into account past experience of these “objects” (for example their weight). All participants reported that lead objects were harder to physically rotate than wooden ones. However, only wrestlers mentally rotated lead objects more slowly than wooden ones—as they would if they were physically rotating them—suggesting the involvement of motor processes. These findings show that the involvement of motor processes in mental rotation depends on specific rather than mere sensorimotor experience.     

300 MVA脉冲发电机组滑差方式起动过程研究

介绍了300 MVA脉冲发电机组的滑差装置。对机组采取滑差方式的起动过程进行了分析和等效建模。根据机组实际起动过程电气波形,利用非线性规划模型,建立了滑差装置液体电阻等效仿真模型,并代入机组参数对起动过程进行仿真,仿真结果和实际波形吻合,验证了模型的正确性。在此基础上,为了使机组的转速达到额定转速,提出在滑差装置液体电阻低位时并入两级固体金属电阻后短接的方案,给出了两级固体金属电阻的阻值等理论参数,并通过仿真验证了方案的可行性。建立的仿真模型可以作为研究不同参数、不同控制策略下的机组起动过程动态特性的重要工具。     

双流制窄轨电力机车用异步牵引电机设计

将牵引电机应用于双流制窄轨电力机车时,由于窄轨机车轨距小,所以牵引电机安装空间异常狭小,比一般牵引电机在安装空间、电机结构、电磁负荷等方面的要求更加苛刻。针对窄轨双流制电力机车的运用特点和特殊要求进行了分析,提出了牵引电机的设计要求和关键技术难点,并对关键技术难点给出了相应的分析和解决措施。对该牵引电机的制造过程及电机试验测试情况进行了论述。试验结果表明,该牵引电机达到了设计预期,完全能满足设计要求。     

Three-dimensional numerical analysis on combustion performance and flow of hybrid rocket motor with multi-segmented grain

This paper presents the combustion characteristics in hybrid rocket motors with multi-segmented grain through three-dimensional numerical simulations. Multi-segmented grain is composed of several thin grains with two or more ports. The numerical model consists of Navier-Stokes equations with turbulence, solid fuel pyrolysis, chemical reactions, a fluid–solid coupling model and a regression rate model. The simulations adopt 90% Hydrogen Peroxide (HP) and PolyEthylene (PE) as the propellant combination. The effects of the rotation, port number, fuel grain segment number and mid-chamber length on the flow field and combustion performances are analyzed. The results indicate that the multi-segmented grain configuration can strengthen the flow field, and the regression rate and combustion efficiency are enhanced. Take the cases with two grain segments and three ports for example, the regression rate is increased by 32.4%−45.1% and the combustion efficiency increases by 6%−8.6% in different rotation angles.     

PWM变频器供电的感应电机传热特性

为了探究电动机在脉宽调(Pulse width modulation，PWM)变频器供电下的传热特性，近一步揭示变频参数（调制比）对电动机温升分 布的影响特征,以一台采用PWM变频器供电下55 kW驱动用感应电机为例，基于流体力学及传热学基本原理，结合电机通风结构特征，建立外部包裹有空气域的三维流热耦合求解域模型，并采用有限体积元法对电机内的温度场进行了数值研究。此外，针对PWM不同调制比控制条件下电动机全域内的传热特性进行了对比分析，结果表明：两个不同调制比控制条件下电机求解域 内各主要部件温升分布趋势大致相同；径向上，转子部分温升较高，在气隙位置温升出现阶跃式变化，定子部分温升较低；轴向上，电机各部分近风端温升较低，远风端温升较高；周向上，定子轭部温升呈波浪式变化。     

永磁同步电机最优滑模控制

为了减少永磁同步电机调速中的动态误差,提出了一种积分性能最优的滑模控制方法。该方法以滑模控制中的动态误差为性能指标,在此基础上建立最优切换函数,并采用最优控制理论对滑模控制器进行设计。用该方法设计的滑模控制系统,通过滑模面斜率的连续变化,能够加速系统状态变量到达滑模面的过程,极大地提高对参数摄动和外部干扰的鲁棒性。仿真结果表明,该时变滑模面控制方法使系统具有无超调、快速、稳定等优点,提高了系统的鲁棒性。