基于网格测力数据的多体分离轨迹预测方法研究

将基于风洞网格测力试验数据建立的气动力模型与刚体运动方程进行耦合求解得到多体分离轨迹-时间特性，建立了一种多体分离的离线轨迹预测方法。为了提高气动力模型的预测精度，针对移动最小二乘法（MLS）模型提出一种新的权函数形式，针对Kriging气动力数学模型通过加入样点预处理提出了Kriging-Pre数学模型。研究方法应用于来流马赫数6条件下，某并联两级入轨飞行器标模的分离特性研究。研究表明采用改进的两种气动力数学模型均可有效提高分离轨迹预测精度，得到与CFD以及风洞试验定性一致的结论。验证了本文提出的离线轨迹预测方法可以满足当前多体分离特性定性分析需求，具有较高时效性。     

仿尺蠖型火星车设计与验证

针对传统被动悬架式火星车在火星复杂地形运动中可能存在的问题，设计了仿尺蠖型火星车，包括沉陷脱困设计、爬坡设计、防托底设计和抬轮设计；识别了仿尺蠖型火星车移动系统的关键参数，计算得到不同火星车抬升高度的关键参数值和一个尺蠖运动周期的位移值；计算结果表明仿尺蠖型火星车可以解决被动悬架式火星车的上述问题。对所设计的仿尺蠖型火星车开展了地面试验和飞行试验验证，地面试验验证了车轮沉陷脱困能力、越障能力和爬坡能力；作为仿尺蠖型火星车应用的实例，“祝融号”火星车成功经历了飞行试验，它在火星表面的顺利运行表明仿尺蠖型火星车设计措施有效。     

初始运行条件对空间飞行器飞行影响研究

某试验型微小空间飞行器用于检测空间探测技术,通过对该飞行器运动轨迹及姿态变化的研究,对比分析空间探测技术的实时响应和检测精度。针对发射过程中,扰动会改变空间飞行器自由飞行过程的初始运行条件的问题,建立计及环境因素的空间飞行器轨道动力学和基于欧拉方程的姿态动力学模型,并对飞行器在不同初始运行条件下的运动过程进行数值研究。结果表明:改变初始条件,飞行器运动过程将产生不同程度的变化;入轨初速度越大,飞行器轨道离心率和周期越大;非零发射角将引起轨道偏移和旋转,俯仰发射角主要引起俯仰角变化,偏航发射角主要影响滚转角和偏航角,并且角度越大,幅度越大;自转角速度越大,姿态角变化越小。     

舰艇运动对导弹冷发射出筒的影响

针对舰载导弹垂直冷发射对导弹出筒轨迹和姿态偏差有一定要求的现状,研究舰艇运动对导弹冷发射出筒扰动问题。分析了舰艇运动中可能造成最大扰动的发射时刻。采用对可能最大值点仿真研究的方法,用动力学仿真软件ADAMS针对可能最大扰动时刻进行影响程度的定性研究。结果表明,5级海情对舰载导弹冷发射影响较大;舰艇运动最大过载时刻对导弹轨迹水平和竖直方向位移影响最大;在最大摇摆角时刻发射会导致导弹出现最大姿态偏角。     

基于ADS-B信息的通航飞行冲突避让算法研究

随着低空空域的开放和通用航空的发展,低空空域流量大幅增加,致使飞机飞行冲突事件呈多发态势。为了解决低空冲突问题,基于广播式自动相关监视(ADS-B)信息的避让算法,首先利用相对运动关系对本机周围的飞行状况进行分析,排除不存在危险冲突的航空器;然后针对危险接近的航空器,提出调整速度和改变航向两种避让策略;最后利用Matlab软件,对两种避让算法进行仿真分析。结果表明:算法正确有效,能够快速辨别飞行冲突,并给出合理的避让策略;调整航向的避让算法,其有效性优于调整速度的避让算法,但在实际飞行中,由于调整速度的避让方法更易操作且节约成本,应优先选择调整速度的避让方案。     

A novel visual servo method for space manipulators by planning jerk

A novel trajectory planning method for space manipulators is proposed in this article, which can generate trajectory in Cartesian space with continuous joint jerk. The key idea is that, given the desired position for an individual joint, the corresponding joint trajectory is generated in a way like a controller. The generated jerk acts as the controller’s output driving an ideal third-order system to arrive at the desired position, with no need for discrete points in advance. In real applications, the visual servo task is accomplished hierarchically. Since the desired pose in Cartesian space measured by cameras concerns multi degrees of freedom (DOF), desired positions for individual joints are obtained by inverse-kinematics model. Then, joint trajectories are generated as above. To improve the trajectory’s smoothness, a bridging matrix is implemented to ensure that the desired pose varies continuously. Simulation and experimental results show that the proposed method is effective to track targets with different kinds of motion, i.e. can track the input-bounded signal asymptotically.     

舰载雷达鉴定试验数据处理关键问题分析

舰载雷达鉴定试验是雷达试验的重要部分.为了对雷达的性能作出置信度高的评判,数据处理是关键.只有因素考虑全面、模型建立正确,才能获得高精度的真值数据,进而实现对雷达的可靠评判.分析了数据处理的流程和关键环节,针对空间变换、舰体运动参数补偿、时间校准3个关键问题进行建模,并用实例计算结果验证了模型的可行性和有效性.     

Lift performance enhancement for flapping airfoils by considering surging motion

The flapping motion has a great impact on the aerodynamic performance of flapping wings. In this paper, a surging motion is added to an airfoil performing pitching-plunging combined motion to figure out how it influences the lift performance and flow pattern of flapping airfoils. Firstly, the numerical methods are validated by a NACA0012 airfoil pitching case and a NACA0012 airfoil plunging case. Then, the E377m airfoil which has typical geometric characteristics of the bird-like airfoil is selected as the calculation model to study how phase differences φ₁ between surging motion and plunging motion affect the aerodynamic performance of flapping airfoils. The results show that the airfoil with surging motion has comprehensively better lift performance and thrust performance than the airfoil without surging motion when 15°< φ₁ < 90°. It is demonstrated that surging motion has a powerful ability to improve the aerodynamic performance of flapping airfoil by adjusting φ₁. Finally, to further explore how flapping airfoil improves lift performance by considering surging motion, the flapping motions of E377m airfoil with the highest lift coefficient and lift efficiency are obtained through trajectory optimization. The surging motion is removed in the highest lift case and highest lift efficiency case respectively, and the mechanism that surging motion adjusts the aerodynamic force is analyzed in detail by comparing the vortex structure and kinematic parameters. The results of this paper help reveal the aerodynamic mechanism of bird flight and guide the design of Flapping wing Micro Air Vehicles (FMAV).     

High dynamic output feedback robust control of cascaded extended state observer

High dynamic tracking performance is a key technical index of hydraulic flight motion simulator(HFMS). However, the strong nonlinearities, various model uncertainties and measurement noise in hydraulic actuation systems limit the high dynamic performance improvement. In this paper, the outer axis frame of a HFMS is taken as a case study and its nonlinear dynamic model with consideration of strong nonlinearities, matched and mismatched uncertainties is established.A novel cascaded extended state ...     

固体姿轨控发动机喉栓运动时序实验设计方法

固体姿轨控发动机通过伺服机构控制喉栓位移实现推力矢量调节。为实现推力精确调控，需拟合大量地面试验数据，得出发动机喉栓位移与推力矢量间的数学模型。提出了一种面向喉栓式固体轨控发动机喉栓运动时序实验设计方法，实现了单次试验中不同燃烧室理论压强及喉栓位移组合最大覆盖，为最低试验成本下精准构建喉栓位移与推力输出模型提供训练样本。以四阀固体轨控发动机作为对象，基于零维内弹道实现燃气发生器压强求解。采用Φp准则评估喉栓位置组合遍历性，并对其进行优化，获得合理的喉栓运动方案。算例结果证明实验设计后方案在整个运动周期内几乎遍历各种组合状态，较实验设计前Φp值提升近40%，验证了本文实验设计方法在时序工程问题中的优良性能。采用实验设计方法可提高固体姿轨控发动机地面试车数据利用效率。