Simulating planetary wave propagation to the upper atmosphere during stratospheric warming events at different mountain wave scenarios

Parameterization schemes of atmospheric normal modes (NMs) and orographic gravity waves (OGWs) have been implemented into the mechanistic Middle and Upper Atmosphere Model (MUAM) simulating atmospheric general circulation. Based on the 12-members ensemble of runs with the MUAM, a composite of the stratospheric warming (SW) has been constructed using the UK Met Office data as the lower boundary conditions. The simulation results show that OGW amplitudes increase at altitudes above 30 km in the Northern Hemisphere after the SW event. At altitudes of about 50 km, OGWs have largest amplitudes over North American and European mountain systems before and during the composite SW, and over Himalayas after the SW. Simulations demonstrate substantial (up to 50–70%) variations of amplitudes of stationary planetary waves (PWs) during and after the SW in the mesosphere-lower thermosphere of the Northern Hemisphere. Westward travelling NMs have amplitude maxima not only in the Northern, but also in the Southern Hemisphere, where these modes have waveguides in the middle and upper atmosphere. Simulated variations of PW and NM amplitudes correspond to changes in the mean zonal wind, EP-fluxes and wave refractive index at different phases of the composite SW events. Inclusion of the parameterization of OGW effects leads to decreases in amplitudes (up to 15%) of almost all SPWs before and after the SW event and their increase (up to 40–60%) after the SW in the stratosphere and mesosphere at middle and high northern latitudes. It is suggested that observed changes in NM amplitudes in the Southern Hemisphere during SW could be caused by divergence of increased southward EP-flux. This EP-flux increases due to OGW drag before SW and extends into the Southern Hemisphere.     

熔融沉积成型连续碳纤维增强尼龙蜂窝芯材的压缩特性

采用熔融沉积成型方法成形了连续碳纤维增强尼龙复合材料蜂窝芯材,并对不同测试方向的静态单轴压缩特性进行了表征分析,着重关注不同测试方向熔融沉积成形蜂窝芯材平面静态压缩破碎行为和能量吸收行为,并与纯聚合物基体进行对比。结果表明:X_1方向的压缩平台区域的力-位移曲线更加平滑稳定,且载荷值稍高于X_2方向,因此X_1方向更适用于能量吸收应用;此外,连续纤维的增强作用可使蜂窝芯材的平台载荷值得到明显提升。研究结果为连续纤维增强聚合物复合材料的空间增材制造提供理论基础。     

云制造环境下机床装备资源选择方法

针对云制造环境下机床装备资源具有数量大、异质异构、服务制约因素多等问题，提出了基于多准则决策的机床装备资源选择方法。首先，利用本体论对机床装备资源建模，将物理资源虚拟化封装，实现虚拟资源与物理资源的逻辑映射。进一步地，使用语言变量量化决策者评估信息，采用模糊决策与试验评价实验室（FDEMATEL）和熵值法（EW）相结合的组合赋权法，引入模糊VIKOR（FVIKOR）多属性决策方法对机床装备资源进行综合评估，建立FDEMATEL-EW-FVIKOR的多准则混合决策模型。最后，将该方法应用于某生产制造企业，实验对比决策结果验证了多准则混合决策模型的可行性和有效性。     

面向空间天线的TWF复合材料性能研究

利用碳纤维三向编织物（triaxial woven fabric，TWF）作为增强材料，与柔性基体材料硅橡胶复合，制成兼具一定柔性和刚性的复合材料壳膜结构，用于卫星天线反射器，是一种新型的高精度可展开天线实现方案。采用复合材料细观方法，对碳纤维增强硅橡胶TWF复合材料进行了力学性能的研究。首先由纤维和基体的材料特性得到均质纤维束的材料特性；接下来考虑纤维束交织情况（起伏波动）建立由纤维束组成的单胞实体有限元模型；然后对单胞实体有限元模型进行均匀化分析，施加周期性边界条件，最终得到等效的均质材料特性；为满足天线反射器高性能需求，分析了碳纤维种类、纤维体积分数对单胞等效性能的影响规律。对该材料力学性能的研究，可以为其未来应用于大型高精度可展开天线反射器提供一定的理论依据。     

Modeling irregular small bodies gravity field via extreme learning machines and Bayesian optimization

Close proximity operations around small bodies are extremely challenging due to their uncertain dynamical environment. Autonomous guidance and navigation around small bodies require fast and accurate modeling of the gravitational field for potential on-board computation. In this paper, we investigate a model-based, data-driven approach to compute and predict the gravitational acceleration around irregular small bodies. More specifically, we employ Extreme Learning Machine (ELM) theories to design, train and validate Single-Layer Feedforward Networks (SLFN) capable of learning the relationship between the spacecraft position and the gravitational acceleration. ELM-base neural networks are trained without iterative tuning therefore dramatically reducing the training time. Analysis of performance in constant density models for asteroid 25143 Itokawa and comet 67/P Churyumov-Gerasimenko show that ELM-based SLFN are able learn the desired functional relationship both globally and in selected localized areas near the surface. The latter results in a robust neural algorithm for on-board, real-time calculation of the gravity field needed for guidance and control in close-proximity operations near the asteroid surface.     

基于 Kriging与多点取样算法的压气机特性建模

针对航空燃气轮机流量系数插值建模过程中,获取样本数据时的实验成本较高以及插值模型精度偏低这 2个问题,根据样本点在设计空间中的分布与模型精度的关系,在 Kriging插值模型的基础上,采用把垂距作为设计变量取值标准的取样算法。首先,将样本点与相邻 2点之间连线的垂距与垂距阈值进行比较,筛选出符合条件的数据点,形成候选点集;其次,选用高斯函数判定基础点集和候选点集的相关性;最后,使用该算法筛选后的样本点构建 Kriging插值模型。实验结果表明,该方法使用的样本点为原来数量的 70%左右,并且预测精度得到了提高,该方法是有效可行的。     

Factor graph based navigation and positioning for control system design: A review

Navigation and positioning is an important and challenging problem in many control engineering applications. It provides feedback information to design controllers for systems. In this paper, a bibliographical review on factor graph based navigation and positioning is presented. More specifically, the sensor modeling, the factor graph optimization methods, and the topology factor based cooperative localization are reviewed. The navigation and positioning methods via factor graph are considered a...     

考虑高斯能量分布的复杂表面航天器激光雷达散射特性分析

针对复杂表面航天器在激光雷达照射下散射特性模拟不准的问题,通过表面建模和激光特性修正进行了解决。该方法首先通过高斯能量分布法对激光光束模型进行修正;然后基于有限元的思想,针对航天器复杂表面非光滑、非连续以及多材质等特性,利用改进Z-buffer的消隐算法解决了复杂航天器表面建模问题;最后建立了面向激光雷达的复杂表面航天器激光雷达散射截面的计算方法。仿真分析表明:航天器不同姿态下的激光雷达散射截面精度提升了14.58%,为后续面向激光雷达的隐身设计奠定了基础。     

超大口径环形天线包带展开过程动力学仿真

中间柔性包带是环形可展开天线的重要组成部分。中间包带拔销器解锁后,复材包带与环形桁架同步展开。因复材包带柔性较强,它会绕根部固定端进行回弹,因此展开过程存在金属接头和桁架上复材薄壁管件碰撞风险。随着天线口径增大,该风险会持续增大。基于柔性多体动力学理论对超大型口径环形可展开天线包带展开过程进行动力学建模仿真,并在此基础上分析得出包带展开过程金属接头到环形桁架最小距离主要和复材包带阻尼率以及桁架预展速度相关。通过进一步研究发现：复材包带阻尼率越高,展开过程金属接头到环形桁架最小距离越大;桁架预展速度越快,展开过程金属接头到环形桁架最小距离越小。此外,对逆止回弹机构失效这一在轨极端条件下包带展开过程进行建模仿真,分析得出包带在该条件下展开过程金属接头到环形桁架最小距离变化规律。该研究可为超大口径环形天线结构优化设计及包带在轨展开预示提供依据。     

基于3DS MAX模型的无人直升机实时监控系统三维建模

分析OpenGL中三维建模的主要方法,结合共轴式无人直升机实时监控飞行系统的设计需要,得出利用3DS MAX的输出模型进行三维建模可以大大提高效率。分析3DS MAX主要输出文件的结构,指出OpenGL建模所需的要素。设计并实现了3DS MAX到OpenGL的模型转换模块,能够分离出3DS MAX场景中的三维模型,为在实时监控系统中再现3DS模型并构造监控飞行系统的三维场景提供灵活性。