一类空间对称6R机构的运动学研究及组合应用

可展开平板机构已广泛应用于平板天线、太阳翼等航天机构产品。为提高可展开平板机构的刚度和展收比,将空间对称6R机构应用于可展开平板机构设计。首先,根据约束条件,计算后给出了一种空间3R运动链的几何参数关系;然后,结合螺旋理论,分析了该3R运动链的约束螺旋系;进而根据对称性,研究了空间对称6R机构的自由度、奇异性等运动特征;在此基础上,提出了一种特殊的空间对称6R转动机构;最后,研究了空间对称6R机构的组合方法,设计出一种新型单自由度可展开平板组合机构,并对其进行了运动学仿真验证。该可展机构具有二维方向的展开收拢能力,为可展开平板机构的创新设计提供了有益参考。     

导弹大迎角下非线性诱导滚转力矩数值研究简

 采用计算流体力学（CFD）数值模拟方法,研究战术导弹大迎角状态下涡破裂导致滚转力矩随迎角非线性增长引起舵面控制能力不足的现象。首先通过标准模型的数值分析,验证了所采用的CFD方法具有三角翼前缘涡破裂现象的捕捉能力;然后采用雷诺平均Navier-Stokes方程对某“++”字正常布局导弹构型（含弹翼、弹身、尾舵和整流罩等）进行了数值模拟,结果显示亚声速状态下滚转力矩在迎角大于20°时出现非线性增长,导致全动尾舵的滚转控制能力不足。通过分解各部件对滚转力矩的贡献,并分析流场结构,探明了该现象发生的流动机理,其主要原因是：随着迎角的增长,弹体迎风面的尾舵前缘涡首先发生破裂,导致其平衡诱导滚转力矩的作用被削弱。     

静子叶栅安装角异常非定常流场数值研究

为了研究静子叶栅安装角异常对叶栅通道流场的影响,利用商业软件NUMECA对二维叶栅某个叶片安装角增加5°不同攻角进行非定常流场数值模拟,得到了因安装角异常导致叶栅通道堵塞时对叶栅通道内的流场结构及叶片载荷的影响。结果表明,安装角调节5°时,在正攻角下,随着攻角的增大叶栅通道内流动不断恶化,吸力面出现大面积的附面层分离;负攻角时,气流比较平稳,但是漩涡脱落频率高达3500Hz。分析发现,安装角异常时攻角对漩涡尺度和脱落频率影响较大,其中叶片动态气动力脉动量迅速增大,可能是导致发动机叶片疲劳破坏的原因之一。     

A closed-form solution for moving source localization using LBI changing rate of phase difference only

Due to the deficiencies in the conventional multiple-receiver localization systems based on direction of arrival(DOA) such as system complexity of interferometer or array and amplitude/phase unbalance between multiple receiving channels and constraint on antenna configuration,a new radiated source localization method using the changing rate of phase difference(CRPD)measured by a long baseline interferometer(LBI) only is studied. To solve the strictly nonlinear problem, a two-stage closed-form solution is proposed. In the first stage, the DOA and its changing rate are estimated from the CRPD of each observer by the pseudolinear least square(PLS) method,and then in the second stage, the source position and velocity are found by another PLS minimization. The bias of the algorithm caused by the correlation between the measurement matrix and the noise in the second stage is analyzed. To reduce this bias, an instrumental variable(IV) method is derived. A weighted IV estimator is given in order to reduce the estimation variance. The proposed method does not need any initial guess and the computation is small. The Cramer–Rao lower bound(CRLB) and mean square error(MSE) are also analyzed. Simulation results show that the proposed method can be close to the CRLB with moderate Gaussian measurement noise.     

Gray bootstrap method for estimating frequency-varying random vibration signals with small samples

During environment testing, the estimation of random vibration signals （RVS） is an important technique for the airborne platform safety and reliability. However, the available meth- ods including extreme value envelope method （EVEM）, statistical tolerances method （STM） and improved statistical tolerance method （ISTM） require large samples and typical probability distri- bution. Moreover, the frequency-varying characteristic of RVS is usually not taken into account. Gray bootstrap method （GBM） is proposed to solve the problem of estimating frequency-varying RVS with small samples. Firstly, the estimated indexes are obtained including the estimated inter- val, the estimated uncertainty, the estimated value, the estimated error and estimated reliability. In addition, GBM is applied to estimating the single flight testing of certain aircraft. At last, in order to evaluate the estimated performance, GBM is compared with bootstrap method （BM） and gray method （GM） in testing analysis. The result shows that GBM has superiority for estimating dynamic signals with small samples and estimated reliability is proved to be 100% at the given confidence level.     

Analysis of crack opening stresses for center- and edge-crack tension specimens

Accurate determination of crack opening stress is of central importance to fatigue crack growth analysis and life prediction based on the crack-closure model. This paper studies the crack opening behavior for center- and edge-crack tension specimens. It is found that the crack opening stress is affected by the crack tip element. By taking the crack tip element into account, a modified crack opening stress equation is given for the center-crack tension specimen. Crack surface displace- ment equations for an edge crack in a semi-infinite plate under remote uniform tension and partially distributed pressure are derived by using the weight function method. Based on these displacements, a crack opening stress equation for an edge crack in a semi-infinite plate under uniform tension has been developed. The study shows that the crack opening stress is geometry-dependent, and the weight function method provides an effective and reliable tool to deal with such geometry depen- dence.     

PIV技术在复杂二相流场中的应用

光学元器件随飞行器在大气中飞行时,其工作性能越来越多地受到大气悬浮汇聚微粒的影响。大气微粒在复杂流场中呈现何种运动汇聚效应,对于合理准确评估机载光学元器件的工作效能具有十分重要的工程意义,而复杂气动流场中微粒分布状态的预估一直是飞行器外界环境研究中的一个难点。气动问题的复杂性、大气中微粒的多样性一直是制约各种试验手段展开、数值模型建立的主要因素。利用先进的激光粒子图像技术,在风洞中对舵面旋涡主导的复杂流场中的微粒速度及分布特性进行了实验研究。在测量舵面翼梢脱落旋涡特性的基础上,通过激光片光扫描流场全域,同时高帧频CCD相机同步曝光,利用PIV 拍摄到的流场中涡流截面内微粒分布的瞬态图像。结合图像后处理技术,对原始粒子图像进行互相关、二值化处理,通过对图像区域内的灰度值计算,统计相对流场截面内的粒子浓度系数,得到在复杂旋涡结构流场内瞬态粒子的分布特性规律。研究结果表明,利用大气中微粒在激光片光下的米氏散射原理,可以有效地拍摄到复杂流场结构下粒子光学散射及分布的特性图像,解决了传统环境测试设备无法对复杂条件下流场内粒子分布进行实时测量的缺陷;在旋涡为主导的流场中,大气中的微粒由向心力牵引,在涡核周围达到平衡运动状态,微粒环绕涡核形成一条环状带,这一区域中的粒子浓度系数要远大于自由流场中的微粒,涡核中心粒子呈“空洞”状态。     

一种折叠弹翼悬挂物的分离轨迹试验技术

提出了一种新的折叠弹翼悬挂物机弹分离轨迹试验技术,重点解决了在机弹分离过程中折叠弹翼动态展开时悬挂物的气动力获取问题。研究表明,提出的试验技术通过将悬挂物气动力修正方法引入到悬挂物分离安全性研究当中,准确地得到悬挂物的分离特性,解决了折叠弹翼悬挂物分离轨迹风洞试验技术瓶颈,为折叠弹翼悬挂物的投放分离安全性提供一套工程实用的解决方案。     

Determination of thermal expansion coefficients for unidirectional fiber-reinforced composites

In the present work, the coefficients of thermal expansion（CTEs） of unidirectional（UD）fiber-reinforced composites are studied. First, an attempt is made to propose a model to predict both longitudinal and transverse CTEs of UD composites by means of thermo-elastic mechanics analysis. The proposed model is supposed to be a concentric cylinder with a transversely isotropic fiber embedded in an isotropic matrix, and it is subjected to a uniform temperature change. Then a concise and explicit formula is offered for each CTE. Finally, some finite element（FE） models are created by a finite element program MSC. Patran according to different material systems and fiber volume fractions. In addition, the available experimental data and results of other analytical solutions of CTEs are presented. Comparisons are made among the results of the cylinder model,the finite element method（FEM）, experiments, and other solutions, which show that the predicted CTEs by the new model are in good agreement with the experimental data. In particular, transverse CTEs generally offer better agreements than those predicted by most of other solutions.     

DOA estimation and mutual coupling calibration with the SAGE algorithm

In this paper, a novel algorithm is presented for direction of arrival（DOA） estimation and array self-calibration in the presence of unknown mutual coupling. In order to highlight the relationship between the array output and mutual coupling coefficients, we present a novel model of the array output with the unknown mutual coupling coefficients. Based on this model, we use the space alternating generalized expectation-maximization（SAGE） algorithm to jointly estimate the DOA parameters and the mutual coupling coefficients. Unlike many existing counterparts, our method requires neither calibration sources nor initial calibration information. At the same time,our proposed method inherits the characteristics of good convergence and high estimation precision of the SAGE algorithm. By numerical experiments we demonstrate that our proposed method outperforms the existing method for DOA estimation and mutual coupling calibration.