生物体液在线光纤光谱仪的研制

介绍了一种直接检测生物体液的光纤光谱仪，根据光纤和毛细管的特性，作者设计了一种特殊的光纤探头，该探头可以直接插入生物体内，通过毛细管采集生物体液，并直接引入光路中，即样品不需进行任何预处理就可以直接测量。为了提高测量灵敏度，探头中的光纤采取分层排列以增加体液在光路中的路程，该探头可使测量过程简化并且实现在位监测。利用计算机的并行口输出脉冲以控制步进电机而动色耗棱镜转动，用光电位增管接收其光谱信号，     

永磁电动机网格自动剖分

有限元法是一种可以用来求复杂工程问题近似解的数值方法,而求解域的网格自动剖分技术有明显的实用价值。本文根据网格自动剖分的一般原则,阐述了稀土永磁直流电动机矩形槽三角形单元的自动剖分方法及相应的几个功能子程序,并利用Auto CAD绘图软件包方便的实现了网格数据检查和图形显示。     

直流电机网络控制系统仿真

对直流电机网络闭环控制系统进行仿真分析,根据电机网络闭环控制系统原理建立仿真模型。对具有数据丢包的直流电机网络伺服控制系统输出响应特性进行仿真,比较系统分别采用PI控制及增益,可调PI控制方式时的输出特性。结果表明,相比常规PI控制增益可调PI控制方法在网络环境下具有更好的控制特性。该研究为网络伺服控制技术提供可靠的参考依据。     

基于TC783A的三相电动机缺相保护电路的设计与实现

介绍用于三相电动机缺相保护装置的设计方法,采用集成芯片TC783A为核心元件实现,有效地解决三相电动机其他保护元件的局限性。具有快速切断控制回路电源的功能及缺相指示和相序指示,试验证明系统工作性能良好。     

The role of motor processes in mental rotation: selective shaping of cognitive processing via specific sensorimotor experience

The involvement of motor processes in mental rotation is experience-dependent: different levels of expertise in sensorimotor interactions lead to different strategies in mental rotation. In the present study, wrestlers, gymnasts, and nonathletes physically rotated objects that were either light (wooden) or heavy (lead) but otherwise having the same sizes and shapes. They then performed a mental rotation task using photographs of these objects in which the material and therefore the weight was visible. I hypothesized that wrestlers would rely more heavily on experience-based sensorimotor strategies in performing mental rotation because during their athletic practice they not only manipulate external “objects” (i.e., their opponent) but also have to plan future actions taking into account past experience of these “objects” (for example their weight). All participants reported that lead objects were harder to physically rotate than wooden ones. However, only wrestlers mentally rotated lead objects more slowly than wooden ones—as they would if they were physically rotating them—suggesting the involvement of motor processes. These findings show that the involvement of motor processes in mental rotation depends on specific rather than mere sensorimotor experience.     

Three-dimensional numerical analysis on combustion performance and flow of hybrid rocket motor with multi-segmented grain

This paper presents the combustion characteristics in hybrid rocket motors with multi-segmented grain through three-dimensional numerical simulations. Multi-segmented grain is composed of several thin grains with two or more ports. The numerical model consists of Navier-Stokes equations with turbulence, solid fuel pyrolysis, chemical reactions, a fluid–solid coupling model and a regression rate model. The simulations adopt 90% Hydrogen Peroxide (HP) and PolyEthylene (PE) as the propellant combination. The effects of the rotation, port number, fuel grain segment number and mid-chamber length on the flow field and combustion performances are analyzed. The results indicate that the multi-segmented grain configuration can strengthen the flow field, and the regression rate and combustion efficiency are enhanced. Take the cases with two grain segments and three ports for example, the regression rate is increased by 32.4%−45.1% and the combustion efficiency increases by 6%−8.6% in different rotation angles.     

低速大转矩永磁游标电机在发酵罐中的应用

采用秸秆生产丁醇时,为了达到高效率发酵,需要使发酵液中菌体分布均匀,所加物料需要及时搅拌。工业化生产丁醇的发酵罐尺寸较大,搅拌过程对驱动电机的输出转矩要求较高,因此高效率、小体积、低速大转矩的秸秆发酵搅拌电机对工业化发酵生产丁醇意义重大。设计了一种定转子永磁游标电机用于发酵液搅拌,并对电机的槽极数、电磁性能进行了具体的研究。制造样机并采用滞环控制实现了对液态发酵对象的快速响应,且实现了低能耗、高效率的发酵过程。     

全数字式操纵负荷系统设计及实现

操纵负荷系统是人在回路仿真系统中的负载模拟装置,它要完成对飞行员十分敏感的驾驶杆力和脚蹬力的仿真,其部件模型的设计满足了操纵负荷系统的通用性。此操纵负荷系统在某型机工程模拟器上的应用测试结果表明,该设计符合直升机飞行模拟器鉴定标准的C级要求。     

基于载体姿态测量的微伺服吊舱

针对微小型无人机光电吊舱对光轴稳定与目标跟踪的需求,研究了一种基于载体姿态测量的光学平台稳定技术.该技术利用吊舱基座上的速率陀螺测量机体三轴姿态运动,通过控制光学平台的俯仰和偏航两通道伺服系统实现对光轴的惯性空间稳定.该系统使用步进电机来当执行机构,根据步进电机的特性,可以推导得到控制量与转速的关系,由此省去了在一般捷联稳定技术中的微分测速环节,得出了一种新的基于前馈控制的不变性原理.设计了解耦指令分配算法,将一个两轴耦合系统,转换为两个独立的单轴系统.在单轴控制中,分别设计了比例控制及比例积分控制算法实现对光轴的稳定控制和跟踪.最后通过在Matlab/Simulink环境下的仿真,以及实际的摇摆台试验,证明了基于载体姿态测量的稳定技术能够实现微小型无人机光电吊舱的光轴稳定.     

固体火箭发动机CT图像条状伪影校正

为了校正窄角扇束工业CT扫描重建的固体火箭发动机图像中的条状伪影,分析了条状伪影的产生原因.针对条状伪影是由重排和数据对齐后固体火箭发动机投影数据的非光滑连续性引起的,提出了条状伪影校正的两种算法.两种算法均以中间平移步数的投影数据为基准进行投影数据的重排,一种将重排和数据对齐过程分开处理;另一种将重排和数据对齐过程合并处理.为了验证两种条状伪影校正算法的有效性,采用窄角扇束工业CT对某型固体火箭发动机进行3种不同扫描步长的扫描和重建.结果表明重排和数据对齐过程分开处理的校正算法只有在小步长扫描的情况下重建效果较好,条状伪影较少;而重排和数据对齐过程合并处理的校正算法在3种不同的扫描步长下图像重建质量均较好,条状伪影较少.