基于虚拟仪器的切削力监控技术研究

研制了一种基于虚拟仪器界面、供现场使用的高精度、高效率的金属切削过程监控系统。研究中采用回归分析、叠加原理及抛物线插值的方法建立切削力模型 ,并基于该模型进行参数估计来提取切削状态特征 ,进而监控整个切削过程     

PCD刀具高速铣削TA15钛合金切削力的研究

通过利用回归正交设计和单因素试验设计方案,进行了PCD刀具高速铣削钛合金TA15的切削力试验.对高速加工过程中的动态铣削力进行了频谱分析,分析了高频振动对切刺力波形的影响.然后利用单因素试验分析了工件坐标系中三向分力以及刀具坐标系中切向分力随切削用量的变化规律.通过回归正交设计,建立了PCD刀具高速铣削钦合金时切削用量与动态切削力之间的数学模型,并进行了方差分析,验证了模型的可靠度.分析结果为PCD刀具高速铣削钛合全的工艺参数优化及建立高速铣削数据库奠定了基础.     

硬态切削表面残余应力分析研究

以轴承钢GCr15为研究对象,根据热-弹塑性有限元理论,建立了热力耦合的二维正交硬态切削模型。根据硬态切削的特点,在硬态切削有限元模型中设置了未预先设置分离线的点面接触并选择了Johnson-Cook材料本构模型,通过有限元分析计算,得到了不同切削参数和刀具几何参数条件下已加工表面残余应力的模拟结果。对结果进行比较分析得出,最大压残余应力出现在工件表面,沿着深度的增加工件内部的残余应力由残余压应力转化为残余拉应力,并逐渐趋向于零。这对于控制和提高硬态切削工件表面质量具有重要的理论指导意义。     

切削参数对弧齿锥齿轮齿面平均残余高度的影响

基于弧齿锥齿轮展成加工原理,推导了各数控（NC）轴运动表达式,研究刀盘转速、数控轴联动速度和单步插补角度等参数对齿面平均残留高度的影响规律,建立了两者之间的耦合关系,在此基础上完成了切齿验证试验。结果表明:在降低齿面平均残留高度方面,刀片旋转切削速度的改变影响很小,数控轴联动移动速度的影响略有增加,单步插补度数的影响最为显著,实验结果和理论分析结果一致,验证了本文理论的正确性。      

一种新型电解电源设计及其实验研究

从电解电源的高频高效化、绿色化、数字化及智能化的发展方向出发,利用电流增强原理,设计了一种开关管带并联辅助网络的零电压全桥软开关电路拓扑,具有节能增效、可靠性高的优点.采用TMS320LF 2407A为核心控制芯片.得到了全桥移相PWM输出波形,并设计了反馈信号调理电路与后端驱动电路,电路形式简单紧凑,实现了软开关电解电源的全数字化控制.     

镜像铣削加工奇异区域刀具路径优化

在大型薄壁件镜像铣削加工中,由奇异点引起的旋转轴运动不连续会影响加工质量,降低加工效率。针对此问题,分析了镜像铣削加工奇异点存在的原因,提出了一种奇异区域内的刀具路径优化方法。首先,针对镜像铣削系统的铣削头和支撑头分别建立了其旋转轴运动学变换模型,推导旋转轴微分运动关系,据此分析奇异点存在的原因及其对加工质量和效率的影响,定义了机床行程内的奇异区域范围。分析结果表明在镜像铣削系统行程范围内,仅铣削头存在奇异区域,而支撑头不存在奇异区域。然后,在镜像铣削加工刀路约束条件下,基于刀路光顺性指标建立了刀路优化模型。通过在加工曲面参数域内对跨越铣削头奇异区域的刀路进行调整,使得优化后的刀路更加光顺,以提高加工精度和表面质量,减少奇异区域附近的加工时间。最后,通过镜像铣削加工实验验证所提方法的有效性。     

Improving profile accuracy and surface quality of blisk by electrochemical machining with a micro inter-electrode gap

Electrochemical machining (ECM) has emerged as an important option for manufacturing the blisk. The inter-electrode gap (IEG) distribution is an essential parameter for the blisk precise shaping process in ECM, as it affects the process stability, profile accuracy and surface quality. Larger IEG leads to a poor localization effect and has an adverse influence on the machining accuracy and surface quality of blisk. To achieve micro-IEG (<50 μm) blisk finishing machining, this work puts forward a novel variable-parameters blisk ECM strategy based on the synchronous coupling mode of micro-vibration amplitude and small pulse duration. The modelling and simulation of the blisk micro-IEG machining have been carried out. Exploratory experiments of variable-parameters blisk ECM were carried out. The results illustrated that the IEG width reduced with the progress of variable parameter process. The IEG width of the blade’s concave part and convex part could be successfully controlled to within 30 μm and 21 μm, respectively. The profile deviation for the blade’s concave surface and convex surface are 49 μm and 35 μm, while the surface roughness reaches R_a = 0.149 μm and R_a = 0.196 μm, respectively. The profile accuracy of the blisk leading/trailing edges was limited to within 91 μm. Compared with the currently-established process, the profile accuracy of the blade’s concave and convex profiles was improved by 50.5 % and 53.3 %, respectively. The surface quality was improved by 53.2 % and 50.9 %, respectively. Additionally, the machined surface was covered with small corrosion pits and weak attacks of the grain boundary due to selective dissolution. Some electrolytic products were dispersed on the machined surface, and their components were mainly composed of the carbide and oxide products of Ti and Nb elements. The results indicate that the variable-parameters strategy is effective for achieving a tiny IEG in blisk ECM, which can be used in engineering practice.     

高温磁悬浮轴承励磁绕组制造技术

针对国内外高温励磁绕组存在的缺陷与不足,提出了一种新型的迷宫形励磁绕组结构,首先通过电火花线切割制造出单层迷宫形线圈,并在线圈匝间和层间充分均匀地填充耐高温绝缘材料;然后通过真空钎焊工艺实现多层迷宫形线圈的牢固焊接,最后将焊接成型的多层线圈封装成迷宫形绕组,并应用于单自由度高温磁悬浮轴承试验台中,实现了550℃被悬浮物体近20h的稳定悬浮.研究结果表明:线圈焊缝的高温电阻值小,抗剪切强度满足要求,焊缝的金相组织致密均匀;绕组匝间和层间绝缘性能良好;迷宫形励磁绕组在原理和工艺上是可行的.对高温悬浮试验后的迷宫形绕组内部形貌进行观察后发现封装线圈的高温绝缘材料存在一定的缺陷,有待进一步研究.      

Trajectory control strategy of cathodes in blisk electrochemical machining

A turbine blisk, which combines blades and a disk together, is one of the most important components of an aero engine. In the process of blisk electrochemical machining (ECM), the sheet cathode, which is usually used as a tool electrode, has a complicated structure. In addition to that, the channel between the adjacent blades is narrow and twisted, so interference is apt to happen when the sheet cathode feeds into the channel. Therefore, it is important to choose suitable trajectory control strategy. In this paper, a new trajectory control strategy of the sheet cathode is presented and corresponding simulation analysis is conducted on the basis of an actual blisk model. The simulation results demonstrate that the sheet cathode can feed into the channel by a spatial line trajectory without interference. Moreover, the verification experiments are carried out according to the simulation. The experimental results show that the cathode can move into the channel without interference. It is verified that the new trajectory control strategy is correct and can be used in the blisk ECM process successfully.     

提高某铝合金薄壁深孔零件加工质量研究

通过分析某铝合金薄壁深孔零件在加工过程中存在的问题基础上,采用了拉镗拉铰加工内孔,再以轴向定位夹紧的方式加工外形的思路,该方法保证了零件加工精度,解决了该铝合金薄壁深孔零件的加工问题,完全满足生产实际需要,质量稳定可靠,可为类似零件加工提供参考。