基于BICMOS电流控制型多路输出电源的研制

介绍一种适用于低压、宽范围供电的多路输出DC/DC变换器,在功率电路中使用无损耗箝位电路实现了变压器磁芯的复位,控制电路使用第三代BICOMS电流控制型PWM,简化了电路设计、降低了噪声敏感度,给出了多路输出电源中变压器和耦合电感的工程设计的详细过程,同时分析了多路输出耦合电感对负载交叉调节性能的影响.研制的变换器输入电压范围8V-40VDC,输出5V/3A、±15V/0.5A、 10V/0.5A.     

含非对称裂纹三维有限大体应力强度因子能量释放率方法的封闭解

 本文提出一种新的半工程半解析的方法,导出含非对称裂纹三维有限大体应力强度因子的封闭解。根据此方法,只需少量的机时,即可获得一系列结果。本方法及所得结果在工程上有实际应用价值。     

应用流固耦合数值方法研究机翼的射流减振技术

采用流固耦合的数值计算方法研究了NACA 0 0 15翼型在大迎角 ( 15°～ 6 0°)范围的颤振 ,以及在翼型背部部分引入射流的减振技术。在流体区域用高精度、高分辨率算法求解Farve平均的Navier Stokes方程 ,在固体区域用四阶Runge Kutta法求解振动方程 ,并且每一个时间步后都在两个区域之间传递边界条件。计算结果表明在翼型背部引入适当射流会降低翼型的振动 ,并提高升力。但如果引入射流的速度过高 ,会在叶背处形成新的分离流 ,升力反而会下降     

A Comparative Study of the Influence of the Active Young Sun on the Early Atmospheres of Earth, Venus, and Mars

Because the solar radiation and particle environment plays a major role in all atmospheric processes such as ionization, dissociation, heating of the upper atmospheres, and thermal and non-thermal atmospheric loss processes, the long-time evolution of planetary atmospheres and their water inventories can only be understood within the context of the evolving Sun. We compare the effect of solar induced X-ray and EUV (XUV) heating on the upper atmospheres of Earth, Venus and Mars since the time when the Sun arrived at the Zero-Age-Main-Sequence (ZAMS) about 4.6 Gyr ago. We apply a diffusive-gravitational equilibrium and thermal balance model for studying heating of the early thermospheres by photodissociation and ionization processes, due to exothermic chemical reactions and cooling by IR-radiating molecules like CO₂, NO, OH, etc. Our model simulations result in extended thermospheres for early Earth, Venus and Mars. The exospheric temperatures obtained for all the three planets during this time period lead to diffusion-limited hydrodynamic escape of atomic hydrogen and high Jeans’ escape rates for heavier species like H₂, He, C, N, O, etc. The duration of this blow-off phase for atomic hydrogen depends essentially on the mixing ratios of CO₂, N₂ and H₂O in the atmospheres and could last from ∼100 to several hundred million years. Furthermore, we study the efficiency of various non-thermal atmospheric loss processes on Venus and Mars and investigate the possible protecting effect of the early martian magnetosphere against solar wind induced ion pick up erosion. We find that the early martian magnetic field could decrease the ion-related non-thermal escape rates by a great amount. It is possible that non-magnetized early Mars could have lost its whole atmosphere due to the combined effect of its extended upper atmosphere and a dense solar wind plasma flow of the young Sun during about 200 Myr after the Sun arrived at the ZAMS. Depending on the solar wind parameters, our model simulations for early Venus show that ion pick up by strong solar wind from a non-magnetized planet could erode up to an equivalent amount of ∼250 bar of O⁺ ions during the first several hundred million years. This accumulated loss corresponds to an equivalent mass of ∼1 terrestrial ocean (TO (1 TO ∼1.39×10²⁴ g or expressed as partial pressure, about 265 bar, which corresponds to ∼2900 m average depth)). Finally, we discuss and compare our findings with the results of preceding studies.     

吸力面翼刀对压气机叶栅内二次流的影响

1引言在叶轮机械叶栅内流动控制中,可以通过在叶片吸力面、端壁上安装翼刀或隔片,控制二次流的发展,降低二次流损失,其中将翼刀加装在吸力面上的控制方式即为吸力面翼刀控制技术。吸力面翼刀主要是通过阻断端壁附面层和叶片吸力面附面层近端壁处低能流动沿吸力面的展向迁移来对     

利用BP网络进行发动机故障诊断的研究

探讨了利用人工神经网络的ＢＰ网络进行发动机故障诊断的特点。通过发动机实际故障样本和模拟故障样本对ＢＰ网络的故障诊断功能进行了研究，并且对ＢＰ网络与主因子模型两种算法进行了比较。     

某型飞机同时存在两种惯性耦合问题的探讨

根据稳定性理论，对某型高速飞机的惯性耦合进行初步研究，首先，对飞机的滚转－偏航耦合－俯仰耦合的机理进行分析，然后，在不影响问题本质的前提下提出了一些假设条件，将研究惯性耦合的六自由度全量方程进行简化，求出急滚稳定性判据，以某型机为例，计算出其惯性耦合特性，用急滚稳定性判据进行了分析，并进行了验证 。     

压电纤维复合材料的研究

以提高交叉指形电极压电纤维复合材料诱导应变和挟持应力为目的,采用有限元软件ANSYS分析了电极区聚合物参数、交叉指型电极结构和压电相体积分数对压电纤维复合材料诱导应变和挟持应力的影响。结果表明：增加电极区聚合物的介电常数或减小电极区聚合物的厚度,能够提高元件的诱导应变和挟持应力,元件诱导应变最大可达173με;减小分支电极的周期或者适当增大分支电极的宽度,可以有效地提高元件的作动性能;提高压电纤维体积分数,有利于提高元件的作动性能。     

子午扩张流道中叶片积叠线形式对损失的影响

采用全三维粘性流N－S方程程序，对具有大扩张角中间机匣的某型涡轮 低压导向器叶栅中的流场进行了数值模拟。在子午面型线不变的条件下，导向器叶栅采用了10种不同变曲和倾斜形式的叶片。计算结果表明：导向器叶栅采用不同积叠线形式的叶片，对导向器叶栅出口截面上通道涡的位置，强度和尺度以及能量损失的影响是显著的，采用适度的正弯或正倾斜叶片可降低导向器叶栅的能量损失。     

固体微推力器设计与数值分析

设计了两种基于微光机电技术的固体微推力器结构,其中一种结构具有不连续的非正常拉瓦尔喷管。采用数值计算方法对不同的设计进行了内弹道、燃气流动过程和热损失的数值分析。结果表明:不连续的非正常拉瓦尔喷管同样能够将推进剂燃气加速到超声速,其比冲性能与正常拉瓦尔喷管相当;微光机电技术常用的硅材料会造成推力器比冲性能较大量级的下降,而绝热性能良好的玻璃或陶瓷材料可以有效提高微推力器的比冲性能。