Bifurcation in a 3-DOF Airfoil with Cubic Structural Nonlinearity

Limit cycle oscillations (LCOs) as well as nonlinear aeroelastic analysis of a 3-DOF aeroelastic airfoil motion with cubic restoring moments in the pitch degree of freedom are investigated.Aeroelastic equations of an airfoil with control surface in an incompressible potential flow are presented in the time domain.The harmonic balance (HB) method is utilized to calculate the LCO frequency and amplitude for the airfoil.Also the semi-analytical method has revealed the presence of stable and unstable limit cycles,along with stability reversal in the neighborhood of a Hopf bifurcation.The system response is determined by numerically integrating the governing equations using a standard Runge-Kutta algorithm and the obtained results are compared with the HB method.Also the results by the third order HB (HB3) method for control surface are consistent with the other numerical solution.Finally,by combining the numerical and the HB methods,types of bifurcation,be it supercritical,subcritical,or divergent flutter area are identified.     

基于统计置信度的湍流检测门限确定方法

机载气象雷达是检测飞行中湍流的重要设备,对于保障飞行的安全具有重大意义。它通过判断回波信号谱宽是否超过门限来检测湍流,关键在于检测门限的设定。将其看成一个统计问题进行解决,提出了利用统计学中置信度来设置门限的方法,根据湍流微粒的概率分布推导了置信度与检测门限的关系,并利用其进行检测门限设置。最后利用仿真的气象雷达回波信号进行了实验,实验结果表明提出的方法能够检测出实验中设置的湍流区域．验证了方法的有效性．     

基于P-S-N曲线的三参数法估计叶片最低疲劳极限的实践研究

工程上通常用中值寿命作为航空发动机叶片寿命估算依据,这已经不能满足现代航空发动机研制的高可靠性要求。为此,从本世纪初开始,我国航空发动机研制领域应用最低疲劳极限估算叶片的安全寿命,并把它作为评价叶片疲劳性能优劣的一个重要指标。本文介绍的三参数试验方法主要是根据小样本理论,利用P-S-N曲线方程估计叶片的最低疲劳极限。这...     

反高斯分布环境因子估计

研究了反高斯分布环境因子估计。根据指数分布和对数正态分布环境因子的定义及数据折算与综合的方便,给出了反高斯分布环境因子的定义。据此定义,用经典方法和贝叶斯方法推证了环境因子的上、下限,并给出了一些近似式以便于计算。实例计算结果较令人满意。     

Formability enhancement in hot spinning of titanium alloy thin-walled tube via prediction and control of ductile fracture

The damage and fracture in hot spinning of titanium alloy is a very complex process under the combined effects of microstructure evolution and stress state. In this study, their dependences on processing parameters were investigated by an integrated FE model considering microstructure and damage evolution, and revealing the effects of microstructure and stress states on damage evolution. The results show that the inner surface of workpiece with the largest voids volume fraction is the place with...     

Prediction of forming limit curve （FLC） for AI-Li alloy 2198-T3 sheet using different yield functions

The Forming Limit Curve （FLC） of the third generation aluminum-lithium （Al-Li） alloy 2198-T3 is measured by conducting a hemispherical dome test with specimens of different widths. The theoretical prediction of the FLC of 2198-T3 is based on the M-K theory utilizing respectively the von Mises, Hill＇48, Hosford and Barlat 89 yield functions, and the different predicted curves due to different yield functions are compared with the experimentally measured FLC of 2198-T3. The results show that though there are differences among the four predicted curves, yet they all agree well with the experimentally measured curve. In the area near the planar strain state, the predicted curves and experimentally measured curve are very close. The predicted curve based on the Hosford yield function is more accurate under the tension-compression strain states described in the left part of the FLC, while the accuracy is better for the predicted curve based on Hill＇48 yield function under the tension-tension strain states shown in the right part.     

Prediction of forming limit curve (FLC) for Al-Li alloy 2198-T3 sheet using different yield functions

The Forming Limit Curve (FLC) of the third generation aluminum-lithium (Al-Li) alloy 2198-T3 is measured by conducting a hemispherical dome test with specimens of different widths. The theoretical pred...     

飞机结构强度试验应急载荷限定系统

多轮多支柱起落架飞机主起落架数量较多，试验机及试验设备重量大。试验应急卸载时，试验件和设备重量、以及加载过程中试验件变形所聚集能量快速释放的不协调性易对支持点结构产生较大冲击载荷，且该载荷不可控，影响试验的考核，存在安全隐患。针对多轮多支柱起落架飞机的强度试验要求，设计一种载荷限定系统。在应急卸载或者试验停试情况下，能够为非支持点起落架输出设定载荷，保证应急瞬间所产生的所有载荷按要求分配到所有起落架上，从而防止支持点起落架超载；试验过程中，能够对非支持点起落架施加试验主动载荷。利用仿真软件验证了系统原理的可行性。依据原理设计载荷限定系统，对其结构和工作性能进行应用验证，并在某型飞机全机疲劳试验中进行应用调试，结果表明，该系统完全能够满足试验要求。     

控制器非线性对飞机纵向飞行品质的影响分析

针对飞机控制系统执行机构具有非线性这一特点,选用某歼击机作为研究对象,分析各类非线性环节对飞机纵向短周期特性的影响。首先分析了死区、间隙和速率饱和等非线性环节的基本特性,建立了相应的包含非线性环节的飞行动力学模型,然后,基于Chalk准则计算不同非线性参数下的飞行品质指标,进行飞行品质评价。通过对不同飞控系统构型的对比研究,探讨了执行机构非线性对飞行品质的影响。研究结果表明,各非线性环节都将对系统的快速性产生不利影响,使系统有效上升时间增加,相位延迟增加。其中,间隙还会造成系统阻尼减小,可导致系统不稳并出现极限环振荡。     

小样本下分位数函数的Bootstrap置信区间估计

航空产品试验一般为小样本试验,为了分析小样本情况下的试验数据,结合以概率加权矩为约束条件的最大熵法和求解置信区间及置信带的Bootstrap方法,提出了一种估计小样本试验件母体分位数函数置信区间的方法。最大熵法在矩约束下能够估计样本的密度函数,而以概率加权矩为约束条件的最大熵法能够针对小样本直接给出分位数的无偏估计,无需由密度函数积分得到累积分布函数,再进行转化得到分位数函数。Bootstrap方法求解置信区间具有不依赖于数据分布的优点,具有广泛的应用范围。