Tear Resistance of Orthogonal Kevlar-PWF-reinforced TPU Film

This work seeks to investigate the notch sensitivity and fracture behaviour of orthogonal Kevlar-plain woven fabric (PWF)-reinforced thermoplastic polyurethanes (TPU) film applied to high altitude balloon. Four types of specimens are implemented to measure notched strength and fracture toughness by conducting static tension and tear tests on an MTS system respectively. The damage and failure mechanisms are discussed and the results for notched strength and tear resistance are evaluated and compared with each other. From the experiments, it is found that the notch sensitivity of the film increases with the increase in the size of the hole, but the notch sensitivity and the stress concentration of the notch are insignificant and there is a decrease of only about 4%-10% in tensile strength for the notched specimens with different hole sizes in diameter compared with the unnotched specimen. In contrast, the tear resistance containing a central slit with only 1 mm length is about half of tensile strength of the unnotched film, which implies that the tear resistance exists an significant notch sensitivity. The results of this study provide an insight into notch sensitivity and fracture behaviour of the Kevlar-PWF-reinforced TPU film and constitute a fundamental basis for the design of high altitude balloon.     

H_3PO_4 C_6H_(11)NaO_7体系中钛合金阳极氧化着色工艺研究

作者在H3PO4 C6 H1 1 NaO7体系中对TC10、TC3、TC1、TA2阳极氧化均能得到丰富色彩。研究表明 ,钛材的成分、电压、pH值、升压方式、氧化时间等对阳极氧化膜的颜色都有一定的影响 ,电压是影响氧化膜颜色的主要因素。此外 ,稀土元素铈和双氧水的加入能提高膜层的耐蚀性。     

EXPERIMENTAL STUDY OF FLOW FIELDS IN THE VICINITY OF A FILM COOLING HOLE EXIT

Sofar,filmcoolingisextensivelyadoptedforprotectinghightemperaturepartsingasturbine.Manyresearchworksarefocusedonflow[1~3Jandheattransfer[4'5jinthedownstreamofthecircularhole,buttheflowcharacteristicsattheholeexit,especiallyforflaredholeexit,arenotreportedatpresent.Inordertodesignasuitab1eholeshapeforpracticalcoolingandprovideplentyexperimentaldataforverificationofcomputercodes,adetai1edexperimentalin-vestigationabout3-Dflowfieldsattheexitofasinglecircularandfan-shapedholehasbeencompleted.1Exp…     

NH－93型有机氟涂料的研究

采用国产含氟乳液为基料，研究了辅料的种类和用量，涂料的组成及工艺参数对涂膜性能的影响，提出了能获得良好涂膜的ＮＨ－９３型氟涂料的配方和成膜条件。     

热膜技术在水流测速中的应用研究

研究了在我国现有条件下，利用普通自来水，在室内和试验水槽中不设调温装置的情况下，热膜技术在水流测速中应用的有关技术问题。并利用从美国TSI公司进口的1050A恒温型热线／热膜流速仪测量了紊动射流和三峡溢流坝模型冲坑中掺气水流的脉动流速及紊动结构问题，获得了成功。     

TEMPERATURE EFFECT ON OXIDATION PROTECTION LIFE OF MULTI-LAYER COATING FOR C/C COMPOSITES

Carbon-carboncomposites(C/C)exhibitexcellentstructuralpropertiesabove165OC,andareconsideredasthemostpromisingcandidatematerialsforthehighthrust-weightratioturbineengines.Asakeytechnologyforthehigh-temperaturestructuralapplicationsofC/C,oxidationprotectionispaidmoreandmoreattentionrecently.TheoxidationprotectionllfeofacoatedC/Cisdeterminedbyenvironmenta1temperature,becauseitnotonlydecidesthether-mochemicalconditionsofinterfacesinacoating,butalsocontrolsthedynamicprocessofoxy-gendiffusion.The…     

Effect of wall suction on leading edge contamination

This paper is devoted to an experimental study of swept wing leading edge contamination by the turbulence emanating from the wing-wall junction. The main objective is to delay the contamination onset by applying surface suction along the attachment line. Two series of experiments are described; the first one was performed in a small wind tunnel at CERT ONERA, the second one was carried out in the F2 wind tunnel at Le Fauga Mauzac centre. Hot film measurements showed that leading edge contamination could be delayed up to very large Reynolds numbers. We also studied the behaviour of the relaminarized boundary layer downstream of the sucked region, along the span as well as in the chordwise direction.     

纵向波纹隔热屏气膜冷却特性实验

针对加力燃烧室纵向波纹隔热屏气膜冷却效果开展了细致的实验研究,利用红外热像仪测量了隔热屏壁面的温度分布,分析了隔热屏板型、吹风比、开孔率等参数对气膜冷却效率的影响。实验中板型选取了平板和纵向波纹隔热屏,吹风比变化范围是0.5~3.0,开孔率变化范围是1.4%~3.7%。结果表明:相比于平板隔热屏的气膜冷却效率沿程逐渐增加,纵向波纹隔热屏的气膜冷却效率随波纹板的起伏而起伏且大于平板隔热屏;随着吹风比的增加气膜冷却效率逐渐加大,在吹风比为3.0时达到最大值;气膜冷却效率在波峰处低,波谷处高,整体上随波纹板的起伏而波动,吹风比越小,气膜冷却效率随波纹板的起伏变化越明显;高吹风比(吹风比为2.0~3.0)下,气膜冷却效率沿程变化与增幅较为缓慢;整体上,随着开孔率的增加气膜冷却效率逐渐加大,小开孔率(开孔率为1.4%、2.7%)下的气膜冷却效率相差不大,但在次流背风侧,开孔率小的气膜冷却效率要小于开孔率大的气膜冷却效率。      

基于两相流模型的挤压油膜阻尼器空化流场特性数值模拟

基于气液两相流理论中的Mixture模型和Zwart-Gerber-Belamri空化模型,采用动网格技术建立了两端开口中心槽供油型挤压油膜阻尼器三维非定常空化流场求解模型。数值模拟表明:随着阻尼器内环进动,考虑两相流动的油膜低压区在中心槽的两侧产生两道对称的条状负压带,条状带内具有较高的气相体积分数;阻尼器低压区的压力和气相体积分数对进油孔位置十分敏感,阻尼器油膜力和流场气穴比的变化频率与进油孔数密切相关。内环同心进动半径、进动频率对阻尼器空化流场影响的数值计算表明,进动半径和频率的增大均会使得流场内的空化现象加剧,同时气穴比的相位滞后现象愈加显著。      

基于碳纳米管薄膜的复合材料层间增韧

通过浮动催化化学气相沉积法制备连续碳纳米管薄膜，并将其原位沉积到单向碳纤维织物表面，手工铺层后借助真空辅助树脂传递模塑成型（VARTM）工艺制备碳纳米管-碳纤维/环氧树脂复合材料层压板，研究不同面密度的碳纳米管薄膜对层压板Ⅱ型层间断裂韧性的影响。结果表明，随着碳纳米管薄膜面密度的增加，层压板Ⅱ型层间断裂韧性先逐渐提高，当碳纳米管薄膜面密度为9.64 g/m²时，层压板Ⅱ型层间断裂韧性最佳，与原始层压板相比提高了94%。碳纳米管通过桥接树脂裂纹、从树脂中拔出等方式提高层间断裂韧性。当碳纳米管面密度超过临界值时，会引起树脂浸润困难，导致增韧效果降低。