复杂系统的可靠性分析方法研究

本文对未来的运载器的复杂控制系统的可靠性建模、分配和预计的一般方法和程序及综合分析方法进行了讨论和研究。并简述了复杂系统的计算机辅助可靠性分析。     

多点法测量形状误差的补偿控制系统

经过对误差分离技术理论进行了分析之后,又对误差补偿技术进行了研究,并建立了多点法测量形状误差的补偿控制系统。通过补偿主轴径向误差运动,提高了工件的圆度误差和圆柱度误差。     

一种新型的微机补偿晶体振荡器及开发系统

提出了一种新型的以微处理器为核心的AT切温度补偿晶体振荡器 (MCXO)的设计思想 ,说明了其开发系统的原理 ,给出了最后的实验结果。使用该开发系统得到的这种振荡器可以工作在 - 40℃～ 85℃的环境内 ,频率—温度稳定性≤± 5× 10 - 7。     

Tunnel/predictor display with two-axis control coordination and simplification

A longitudinal-lateral control coordination and simplification concept is considered for a tunnel/predictor display, which presents the command flight path and a specified future aircraft position in a 3-dimensional format to the pilot, for improving flight path control. A basic element of the proposed concept is the generation of common longitudinal-lateral transfer characteristics of the predictor-aircraft system for the crossover frequency region. Control coordination is supported by a dynamics similarity between the longitudinal and the lateral response characteristics of the predictor position in closed-loop pilot control actions. The control coordination and simplification concept is considered to support the pilot in manual flight path control, directed at an enhancement of his control performance and at a reduction of his workload. Results from pilot-in-the-loop simulation experiments support the theoretical findings and show the effectiveness of the proposed predictor concept with control coordination.     

面向对象技术的防空导弹Simulink建模与仿真

为防空导弹系统性能改进研究和优化设计,提出了一种新的方法,首先给出了一般防空导弹制导控制系统的数学模型,并采用面向对象建模技术结合动态仿真软件Simulink建立了仿真模型并进行了仿真研究,该模型具有容易理解,可重复使用,易于扩展等优点,即通过部分模块更换或改变参数等就可对该系统在其他条件下进行仿真,仿真结果和实际遥测数据基本吻合,表明了该模型和方法的有效性和实用性。     

一种无塔校准方法研究

在地面卫星测控系统中,目前使用较多的有塔校准技术具有一定的局限性,为了克服这种局限性,本文针对已有的卫星测控系统设备提出一种无塔校准方法,给出了具体无塔校相和无塔校零的实现方法.     

A Novel Onboard-gateway-based Mechanism to Improve TCP Performance in Aeronautical Satellite Networks

The IP-based networks on aircraft serve to support Internet services via satellites. However, in aeronautical satellite hybrid net- works,the TCP protocol performance often deteriorates due to improper decreases and slow recovery of the congestion window. This paper proposes a window size determination and notification mechanism, onboard-gateway-based mechanism (OGBM), which is based on the onboard gateway in the networks on aircraft. A cross-layer approach is adopted by the onboard gateway to obtain the satellite link bandwidth information. And then, by the gateway, through changing the receiver’s advertised window field in ACK packets, TCP sources are notified of the window size of each TCP source calculated on the ground of bandwidth delay product and flow numbers. The mechanism is able to avoid improper changes of TCP window and serve multiple users. Simulation results show that the mechanism with the fairness index close to 1 improves TCP performance in aeronautical satellite networks.     

三维极小脱靶量与极小能量综合最优控制律研究与仿真

根据空间平台拦截器与目标的相对运动方程,基于线性系统最优控制理论提出了一种综合三维极小脱靶量与极小能量的最优控制律。给出了最优推力大小与方向控制,以及最优过渡时间和关机时刻确定的模型。仿真结果表明:该最优控制律控制精度高,易于工程实现。     

利用微气囊扰动进行流动控制的数值模拟研究

探讨一种可以用来模拟“三角翼上分布微气囊，从而控制流动获得滚转力矩”的数值方法。为微型飞机的气动设计提供一种工具。研究的内容包括：考虑微气囊的三角翼网格生成、流场NS方程计算、微气囊不同布局对流动的扰动等。     

飞机主操纵系统疲劳试验载荷谱小操纵位移频次问题研究

针对飞机全机主操纵系统疲劳试验载荷谱中小操纵位移频次影响问题进行了分析和讨论,确定了某机全机主操纵系统小操纵位移频次的级别。同时,在原某机全机主操纵系统疲劳试验载荷谱的基础上再次对其小操纵位移频次进行了计算,去掉了这一级别以下对全机主操纵系统疲劳试验无影响的小操纵位移频次,从而完善了主操纵系统疲劳试验载荷谱。另外,对小操纵位移频次问题研究结果在其全机主操纵系统疲劳试验中的实施效果进行了阐述。