Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

基于图像对的体视显示算法研究与实现

依据摄像机拍摄的左右两幅图像,按照提出的算法进行图像的矫正、重采样和图像对间的密集匹配,最后通过图像插补输出符合双眼特性的体视图像,试验证明插补后体视图像效果较好.     

NiCoP合金包覆空心微珠粉体的制备

采用粉体化学镀技术，以AgNO3取代常见的贵金属盐PdCl2作为活化剂，H2PO2^-取代Sn^2 作为还原剂，在空心微珠表面包覆NiCoP合金。利用扫描电镜、能谱分析仪分析包覆层的形貌和成分。结果表明NiCoP合金均匀包覆在空心微珠表面。并提出了这种改进工艺的一种可能的机理。     

气固紊流剪切流中颗粒弥散的拉格朗日模拟

本文提出了一种对于气固两相紊流剪切流中圆形固体颗粒弥散的拉格朗日拟计算方法，其中考虑了颗粒间的磁撞对流体相和颗料相的影响，应用该方法对一气固紊流剪切流场进行了模拟计算，并对有、无颗粒间磁撞情况下的模拟计算结果与Lavieville用大涡模拟方法的研究结果进行了比较，并进行了讨论。     

Instability and unsteadiness of aircraft wake vortices

This paper presents a review of theoretical and experimental results on stability and other unsteady properties of aircraft wakes. The basic mechanisms responsible for the propagation and the amplification of perturbation along vortices, namely the Kelvin waves and the cooperative instabilities, are first detailed. These two generic unsteady mechanisms are described by considering asymptotic linear stability analysis of model flows such as vortex filaments or Lamb–Oseen vortices. Extension of the linear analysis to more representative flows, using a biglobal stability approach, is also described. Experimental results obtained using LDV, hot wire and PIV in wind tunnels are presented and they are commented upon the light of theory.     

光电瞄准设备通用计量平台

提出了光电瞄准设备通用计量平台的设计方案，论述了平台的硬件、软件构成，并着重分析了双分划双光源照准与两维同步动态测角、读数图像自动识别、多点位多通道实时检测的方法，最后对系统的不确定度进行了分析和评估。     

300M钢纯洁度磁粉检验磁痕现象的分析

采用交、直流磁粉检验并结合金相试验、电子探针试验及微量元素含量分析的方法，对３００Ｍ钢磁痕现象的本质进行了分析。结果表明，采用磁粉检验方法对航空优质钢进行纯洁度检验是可信的。     

固体火箭喷管排气中的粒子分布

1.前言 现代的固体火箭发动机为提高推进剂的能量特性及抑制不稳定燃烧，常常在推进剂中添加金属粉末，最常见的是加金属铝粉。在发动机工作时，铝粉燃烧形成凝聚相的氧化铝粒子。这些粒子在喷管中的流动过程中，温度、速度等方面的变化滞后于燃·气本身的变     

数据融合在纹理识别中的应用

在室内无线通信模型的优化中,需要区分不同的墙壁对象.而对于室内墙壁的图像可以看作是纹理图像.尝试利用数据融合的方法对这些纹理图像进行识别.实验结果表明,数据融合的方法对相似的纹理图像具有较好的识别效果.     

涡切片图象立体重建

 <正> 1.引言 激光片光技术和流体中微粒的光散射效率逐步提高;从烟雾、水汽到激发诱导荧光使流动可视化程度不断开拓。许多研究工作需要通过观察切片照片获得对复杂流动整体结构的理解。因此,将系列二维切片照片重建成立体图象是十分有意义的。 近年来这方面比较典型的工作有Jimener的平面混合层和Agui and Hesselink的共轴喷流重建,分别在平面型和封闭柱面型的不同气流混合界面研究涡系的生成和发展。用涡迹切片重建的三维图象能清楚地显示涡的内部结构,对提供合理的流动假说和计算模型有重要意义。