智慧温室群远程监控系统通信设计

温室监控系统是对温室环境中温度、湿度、光照度等环境因子实施监测与调控的农业设施,可确保农作物获得最适宜的生长发育环境。针对现有温室监控系统在通信上存在距离受限、组网复杂、能耗高且基本仅能实现单个温室控制的问题,设计了一种基于LoRa和NB-IoT相结合的智慧温室群远程监控系统通信模式。该模式以STM32F103C8T6单片机为核心控制器件,采用ATK-LoRa SX1278和NB-IoT模块自组无线通信网实现数据的远程交互。测试结果表明：采用该通信模式可实现温室群中各温室间距离在2km范围内的数据采集、处理和传输,其通信距离远、功耗低,数据传输可靠性符合现代化农业物联网的需求。     

In-orbit assessment of laser retro-reflector efficiency onboard high orbiting satellites

The navigation and geodetic satellites that orbit the Earth at altitudes of approximately 20,000 km are tracked routinely by many of the Satellite Laser Ranging (SLR) stations of the International Laser Ranging Service (ILRS). In order to meet increasing demands on SLR stations for daytime and nighttime observations, any new mission needs to ensure a strong return signal so that the target is easily acquirable. The ILRS has therefore set a minimum effective cross-section of 100 million square metres for the on-board laser retro-reflector arrays (LRAs) and further recommends the use of ‘uncoated’ cubes in the arrays. Given the large number of GNSS satellites that are currently supported by SLR, it is informative to make an assessment of the relative efficiencies of the various LRAs employed. This paper uses the laser ranging observations themselves to deduce and then compare the efficiencies of the LRAs on the COMPASS-M1 navigation satellite, two satellites from the GPS and three from the GLONASS constellations, the two GIOVE test satellites from the upcoming Galileo constellation, the two Etalon geodetic spheres and the geosynchronous communications test satellite, ETS-8. All the LRAs on this set of satellites employ back-coated retro-reflector cubes, except those on the COMPASS-M1 and ETS-8 vehicles which are uncoated. A measure of return signal strength, and thus of LRA-efficiency, is calculated using the laser-range full-rate data archive from 2007 to 2010, scaled to remove the effects of variations in satellite range, atmospheric attenuation and retro-reflector target total surface area. Observations from five SLR stations are used in this study; they are Herstmonceux (UK), Yarragadee (Australia), Monument Peak and McDonald (USA) and Wettzell (Germany). Careful consideration is given to the treatment of the observations from each station in order to take account of local working practices and system upgrades. The results show that the uncoated retro-reflector cubes offer significant improvements in efficiency.     

LabWindows/CVI环境下调用Word文档的实现方法

目的介绍一种在Labwindows/CVI环境下调用Word的实现方法;方法结合具体的实例,实现对Word文档的调用;结果该方法可以按照规定的格式自动生成Word文档;结论提高了软件的效率和自动化程度。     

试验数据管理系统的需求与实现

现在的工程试验产生大量的试验数据,而这些试验数据在储存和使用中存在着大量的问题。试验数据管理系统(TDM)通过梳理和优化试验流程,可以提高试验数据的利用率。     

Issues of geologically-focused situational awareness in robotic planetary missions: Lessons from an analogue mission at Mistastin Lake impact structure,Labrador, Canada

Remote robotic data provides different information than that obtained from immersion in the field. This significantly affects the geological situational awareness experienced by members of a mission control science team. In order to optimize science return from planetary robotic missions, these limitations must be understood and their effects mitigated to fully leverage the field experience of scientists at mission control.     

指数分布基于多重定数截尾样本中异常数据的检验

讨论多重定数截尾指数型寿命数据,对同时存在异常大数据和异常小数据的情形给出了检验方法,得到了检验异常数据的判别标准,最后以一实例说明其应用.     

Satellite and ground detection of very dense smoke clouds produced on the islands of the Paraná river delta that affected a large region in Central Argentina

Intense fires were produced on the Paraná river delta islands, Argentina, during most part of 2008, by a combination of an exceptionally dry period and the farmers’ use of a fire land-cleaning technique. In April 2008, those fires significantly affected the nearby regions and their inhabitants, from Rosario city to Buenos Aires mega-city. In this work we present satellite as well as ground Aerosol Optical Depth (AOD) at 550 nm data obtained during the propagation of pollution clouds to the central zone of Argentina. The highest value (1.18) was registered at Buenos Aires by atmospheric remote sensing, using the satellite instrument MODIS/Terra on April 18th 2008 at 10:35 local time (= UT − 3 h). On the same day, ground air quality detectors also measured in this city the highest Total Suspended Particle (TSP) value of the month, 2.02 mg/m³. The AOD(550) daily variation at Rosario Astronomical Observatory, which is located near the Paraná riverside, was derived by combining solar ultraviolet erythemal irradiance data (measured with a YES biometre) with model calculations. On April 25th 2008, from 12:00 to 15:30 local time, a rather high and constant AOD(550) value was registered, with a mean value of (0.90 ± 0.21). Cities located on the side of the Rosario–Buenos Aires highway (San Nicolás, Baradero and San Pedro) were also affected, showing a mean AOD(550) between the Rosario and Buenos Aires values. The particulate matter was collected with gridded samplers placed on the Paraná river islands as well as at the Rosario Observatory. They were analysed with a Scanning Electron Microscope (SEM) and mainly showed a biological origin. Even if normally large particles travel small distances from the source, organic aerosol in the range of 40–100 μm and complex asymmetric structures were registered several kilometres away from the aerosol sources on the islands. Another event of intense UV index attenuation (98.6%) occurred on September 18th 2008, due to very dense smoke clouds that extended over the Rosario area for several hours. The clouds were driven away from the fires by East–northeast and East–southeast winds. The minimum value of this index measured around noon allows to derive a maximum AOD(550)_max = (3.65 ± 0.90) at 12:45 local time. Soot clouds extended over the Paraná river, transporting Burned Biomass Debris (BBD) that deposited on Rosario. In particular, burned leaves and small branches with dimensions of 1–20 cm were collected. The mean (BBD) particles deposited on the ground from 7:00 to 19:00 local time were (0.92 ± 0.20) BBD/(m² h).     

民用飞机技术出版物规范应用

技术出版物作为民用飞机产品的重要组成部分,用于指导运营人正确地操作和维护飞机.为了满足相关适航规章的要求和用户对于交互式电子技术手册日益增长的需求,实现手册全寿命周期管理,飞机制造商应在保证手册完整、正确、准确的基础上,进一步实现手册的标准化、规范化和结构化.本文对国际主流技术出版物规范的特点、规范的确定、应用方法和风险等进行了介绍和阐述.     

Data fusion algorithm based on state and attribute parameter

Ａｑｕｅｓｔｉｏｎｔｈａｔｈａｓｂｅｅｎｃｏｎｃｅｒｎｅｄｆｏｒｍａｎｙｙｅａｒｓｉｎｔｈｅｍｕｌｔｉｔａｒｇｅｔｔｒａｃｋｉｎｇｆｉｅｌｄｉｓｈｏｗｔｏｒｅｄｕｃｅｔｈｅｃｏｍｐｕｔａｔｉｏｎａｌｃｏｍｐｌｅｘｉｔｙｏｆｄａｔａａｓｓｏｃｉａｔｉｏ...     

Comparison of decision tree methods for finding active objects

The automated classification of objects from large catalogs or survey projects is an important task in many astronomical surveys. Faced with various classification algorithms, astronomers should select the method according to their requirements. Here we describe several kinds of decision trees for finding active objects by multi-wavelength data, such as REPTree, Random Tree, Decision Stump, Random Forest, J48, NBTree, AdTree. All decision tree approaches investigated are in the WEKA package. The classification performance of the methods is presented. In the process of classification by decision tree methods, the classification rules are easily obtained, moreover these rules are clear and easy to understand for astronomers. As a result, astronomers are inclined to prefer and apply them, thus know which attributes are important to discriminate celestial objects. The experimental results show that when various decision trees are applied in discriminating active objects (quasars, BL Lac objects and active galaxies) from non-active objects (stars and galaxies), ADTree is the best only in terms of accuracy, Decision Stump is the best only considering speed, J48 is the optimal choice considering both accuracy and speed.