摄动因素对火星环绕段轨道长期影响研究

针对未来火星探测需要,研究了摄动因素对火星环绕段轨道的长期影响。对各种摄动因子的数量级进行了估计,根据估计结果,对比选取了起主导作用的摄动因子;建立了主要摄动因子的数学模型;通过数值仿真验证,对比分析了火星和地球的相应摄动因素对各自环绕段轨道半长轴和偏心率的影响。仿真结果表明:非球形摄动对火星环绕段轨道的影响具有明显的长周期特征,而相应的地球环绕段短周期效应较明显,这主要是由于质量分布不同造成火星非球形引力位中田谐项的系数基本都比地球的相应值大一个量级,因此在实际轨道设计中应该重点考虑高阶项特别是高阶田谐项对环绕段轨道造成的影响。     

地月系L2平动点轨道长期维持过程研究

针对地月系L2平动点附近两种常用轨道——拟halo轨道和Lissajous轨道,研究了轨道长期维持过程。采用穿越xz平面单圈控制的轨道维持策略,控制量通过单步预测法进行寻优。在全摄动动力学模型下对拟halo轨道和Lissajous轨道受控维持下的一年飞行过程分别进行了仿真和比较,结果显示Lissajous轨道的维持控制代价优于拟halo轨道,从轨道拓扑构型保持方面对该结果进行解释,并设计对比实验加以验证。研究结论对地月系L2平动点轨道选择、维持控制策略设计、长期飞行效果分析等方面具有工程参考意义。     

探头式结冰探测器安装位置分析

通过求解雷诺时均Navier-Stokes(N-S)方程获得空气流场,采用欧拉法求解水滴运动场获得水滴运动轨迹.通过计算来流液态水含量等值线距离部件表面的垂直距离,获得部件不同位置上的广义水滴遮蔽高度.研究了不同飞行条件和气象条件下的广义水滴遮蔽高度大小.根据探头式结冰探测器安装位置要求确定探头式结冰探测器的合理安装区域.通过分析不同的状态参数对广义水滴遮蔽高度的影响,为结冰探测器安装位置计算状态参数的选取提供了数据支持.      

A detailed FLUKA-2005 Monte-Carlo simulation for the ATIC detector

We have performed a detailed Monte-Carlo (MC) simulation for the Advanced Thin Ionization Calorimeter (ATIC) detector using the MC code FLUKA-2005 which is capable of simulating particles up to 10 PeV. The ATIC detector has completed two successful balloon flights from McMurdo, Antarctica lasting a total of more than 35 days. ATIC is designed as a multiple, long duration balloon flight, investigation of the cosmic ray spectra from below 50 GeV to near 100 TeV total energy; using a fully active Bismuth Germanate (BGO) calorimeter. It is equipped with a large mosaic of silicon detector pixels capable of charge identification, and, for particle tracking, three projective layers of x–y scintillator hodoscopes, located above, in the middle and below a 0.75 nuclear interaction length graphite target. Our simulations are part of an analysis package of both nuclear (A) and energy dependences for different nuclei interacting in the ATIC detector. The MC simulates the response of different components of the detector such as the Si-matrix, the scintillator hodoscopes and the BGO calorimeter to various nuclei. We present comparisons of the FLUKA-2005 MC calculations with GEANT calculations and with the ATIC CERN data.     

长航时无人机飞行器管理计算机设计研究

高高空长航时无人驾驶飞机对其任务可靠性和安全性提出了极高的要求,而飞行器管理计算机是保证飞机安全和任务执行的核心部件.飞行器管理计算机采用合适的冗余配置可以有效地提高可靠性和安全性.探讨了一种基于三模冗余(TMR)结构的相似余度容错计算机,描述了计算机的硬件组成以及为满足可靠性要求所采取的任务调度和余度管理算法.在计算机综合化小型化以及调试测试方法方面所进行的创新使计算机具有良好的测试性和维修性并能够适应未来航空电子发展的需求.     

新型低能耗飞机液压系统低温试验方案研究

由于机载液压系统产品在整个飞行包线内会经历低温环境的考验,为了充分验证飞机用液压系统产品在低温环境下性能的可靠性,本文针对液压系统开展低温试验的多种设计方案进行对比,并对其中的三种低温试验方案进行分析,明确各自适应的试验类型,最后通过对比各种方案的优缺点,提出了一种可以满足长时间、低功耗、大流量的液压系统低温试验的全新方案。该方案通过实测满足了试验要求,并达到了预期高效节能的效果。     

输送线网络监控系统的设计与实现

对可编程控制器控制原理进行分析,提出一种在已有设备的基础上进行改造,从而实现基于网络的监控技术。通过RS-485数据传输技术,运用TCP/IP协议,用MCGS(Mon itor and Control Generated System)组态软件编写程序软件,以图形界面实现对输送线的过程进行监控。     

Analysis of the current density characteristics in through-mask electrochemical micromachining (TMEMM) for fabrication of micro-hole arrays on invar alloy film

Invar alloy consisting of 64% iron and 36% nickel has been widely used for the production of shadow masks for organic light emitting diodes(OLEDs) because of its low thermal expansion coefficient(1.86 ? 10à6cm/°C).To fabricate micro-hole arrays on 30 lm invar alloy film,through-mask electrochemical micromachining(TMEMM) was developed and combined with a portion of the photolithography etching process.For precise hole shapes,patterned photoresist(PR) film was applied as an insulating mask.To investigate the relationship between the current density and the material removal rate,the principle of the electrochemical machining was studied with a focus on the equation.The finite element method(FEM) was used to verify the influence of each parameter on the current density on the invar alloy film surface.The parameters considered were the thickness of the PR mask,inter-electrode gap(IEG),and electrolyte concentration.Design of experiments(DOE) was used to figure out the contribution of each parameter.A simulation was conducted with varying parameters to figure out their relationships with the current density.Optimization was conducted to select the suitable conditions.An experiment was carried out to verify the simulation results.It was possible to fabricate micro-hole arrays on invar alloy film using TMEMM,which is a promising method that can be applied to fabrications of OLEDs shadow masks.     

低速长航时无人机垂直突风过载分析

低速中空长航时无人机的升力非线性较强,利用标准离散突风模型和连续紊流模型计算得到的突风过载差别较大.针对该问题,本文采用改进的离散突风模型求解突风载荷,即直接求解突风条件下原始的运动学方程,并在运动历程中考虑非线性升力的影响.结果表明:改进的离散突风模型计算得到的突风载荷明显低于标准离散突风模型所得的载荷,更贴近无人机的实际情况,且改进的离散突风模型与连续紊流模型的计算结果也相近.     

阴影遮挡对太阳电池阵发电能力影响的仿真分析

航天器太阳电池阵的在轨发电能力会由于舱体等对太阳光的遮挡而受到影响。文章通过建立太阳电池电路模型,利用Saber仿真平台进行仿真,得到太阳电池单串电路遮挡片数与功率输出的关系曲线,利用MatLab进行了基于每个单串电池电路的遮挡计算,最终计算得到自主飞行阶段的阴影遮挡造成的太阳电池阵功率损失率。比较新计算方法与传统计算方法的计算结果表明,新方法的计算精度更高,尤其是在被遮挡的电池片数量较少时,新方法的优势更加突出。