具有衬里的纤维缠绕压力容器分析

给出了具有衬里的纤维缠绕压力容器纤维厚度的设计计算方法。当容器的结构一定时，给出了确定爆破压强的方法。     

再入体激波层和近尾流热辐射实验研究

本文介绍了在弹道靶设备上对再入速度下模型的热辐射进行的实验研究工作。铝、高硅氧和聚碳酸酯三种材料的模型在速度为4.5～6.0(km/s),压力为600—8000Pa条件下做了实验,在258nm—1100nm光谱范围内完成了九个波段的辐射测量,给出了三种材料模型的辐射光谱分布曲线。结果表明辐射量除了受环境条件影响外,还强烈地依赖于模型材料;由烧蚀产物引起的辐射通量主要在可见光和近红外区(465nm以上)。估算了烧蚀产物引起的辐射加热率,对头部和近尾流辐射通量做了比较。     

复合材料梁的热弯实验

为研制先进的导弹弹翼，用新研制的复合材料制成工字梁，模拟导弹飞行时翼梁受热弯条件进行实验，测出梁的温度和挠度随时间变化曲线，确定正常使用条件和失效形式，用此复合材料代替现役导弹的金属材料，可明显减重，改善性能。     

3D nonlinear wave heating of coronal loops

The heating of solar coronal loops by the resonant absorption or phase-mixing of incident wave energy is investigated in the framework of 3D nonlinear magnetohydrodynamics (MHD) by means of numerical simulations.     

气动谐振管加热振荡流动过程数值研究

为了了解气动谐振管加热现象的振荡流动过程，利用显式TVD－MacCormark格式数值求解二维轴对称雷诺平均N－S方程，获得了一个谐振循环中完整的喷嘴－谐振管系统的振荡流动湍流流场，结果表明，欠膨胀声速冲击喷流固有的流场不均匀性和不稳定性是谐振管加热现象产生的内在原因，激波耗散是谐振管主要的加热机理。     

Ni-Cu-Mn-Co高温钎料的工艺钎焊性分析

通过飞机导管高温钎焊时Ni-Cu-Mn-Co钎料传热特征的物理模拟,得到了钎焊间隙的控制要素。在运用经典电磁场理论进行热电磁耦合分析的基础上,制定了安装式感应钎焊工艺。     

Phase Space Density Analysis of Energy Transport in the Earth’s Magnetotail

Two energetic events in the Earth’s magnetotail detected by Geotail are examined with detailed analysis of three-dimensional velocity phase space density. It is found that the occurrence of multiple ion components is high during these dynamic episodes. Different populations evolve independently of each other, suggesting particles from multiple activity sites contributing to the observed phase space density. The transport properties with consideration of multiple components are evaluated, with the result showing significant differences from those based on a single fluid approach. This comparison indicates that precise evaluation of the energy and magnetic flux transport of energetic events in the magnetotail requires resolving individual populations in the phase space density.     

电流探头校准的测量不确定度分析

介绍了电流探头传输阻抗的校准原理,并对测量不确定度进行了详细的分析评定.     

基于视线角序列的机动目标视线角速率计算

 依据拦截弹与机动目标间的相对位置关系，采用导引头球面模型，基于当前统计模型，实现了强跟踪状态自适应滤波，计算出了可用于制导的视线角速率。该算法利用导引头球面模型，将测角信息转换成距离信息，进行方差自适应调整和卡尔曼滤波。在只给出视线角序列信息的情况下，根据相对状态滤波结果求出所需的视线角速率。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.